1 /* 2 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ 3 * 4 * Based on da830evm.c. Original Copyrights follow: 5 * 6 * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com> 7 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 22 */ 23 24 #include <common.h> 25 #include <i2c.h> 26 #include <net.h> 27 #include <netdev.h> 28 #include <asm/arch/hardware.h> 29 #include <asm/arch/emif_defs.h> 30 #include <asm/arch/emac_defs.h> 31 #include <asm/io.h> 32 #include "../common/misc.h" 33 #include "common.h" 34 35 DECLARE_GLOBAL_DATA_PTR; 36 37 #define pinmux(x) (&davinci_syscfg_regs->pinmux[x]) 38 39 /* SPI0 pin muxer settings */ 40 static const struct pinmux_config spi1_pins[] = { 41 { pinmux(5), 1, 1 }, 42 { pinmux(5), 1, 2 }, 43 { pinmux(5), 1, 4 }, 44 { pinmux(5), 1, 5 } 45 }; 46 47 /* UART pin muxer settings */ 48 static const struct pinmux_config uart_pins[] = { 49 { pinmux(0), 4, 6 }, 50 { pinmux(0), 4, 7 }, 51 { pinmux(4), 2, 4 }, 52 { pinmux(4), 2, 5 } 53 }; 54 55 #ifdef CONFIG_DRIVER_TI_EMAC 56 static const struct pinmux_config emac_pins[] = { 57 { pinmux(2), 8, 1 }, 58 { pinmux(2), 8, 2 }, 59 { pinmux(2), 8, 3 }, 60 { pinmux(2), 8, 4 }, 61 { pinmux(2), 8, 5 }, 62 { pinmux(2), 8, 6 }, 63 { pinmux(2), 8, 7 }, 64 { pinmux(3), 8, 0 }, 65 { pinmux(3), 8, 1 }, 66 { pinmux(3), 8, 2 }, 67 { pinmux(3), 8, 3 }, 68 { pinmux(3), 8, 4 }, 69 { pinmux(3), 8, 5 }, 70 { pinmux(3), 8, 6 }, 71 { pinmux(3), 8, 7 }, 72 { pinmux(4), 8, 0 }, 73 { pinmux(4), 8, 1 } 74 }; 75 #endif /* CONFIG_DRIVER_TI_EMAC */ 76 77 /* I2C pin muxer settings */ 78 static const struct pinmux_config i2c_pins[] = { 79 { pinmux(4), 2, 2 }, 80 { pinmux(4), 2, 3 } 81 }; 82 83 #ifdef CONFIG_NAND_DAVINCI 84 const struct pinmux_config nand_pins[] = { 85 { pinmux(7), 1, 1 }, 86 { pinmux(7), 1, 2 }, 87 { pinmux(7), 1, 4 }, 88 { pinmux(7), 1, 5 }, 89 { pinmux(9), 1, 0 }, 90 { pinmux(9), 1, 1 }, 91 { pinmux(9), 1, 2 }, 92 { pinmux(9), 1, 3 }, 93 { pinmux(9), 1, 4 }, 94 { pinmux(9), 1, 5 }, 95 { pinmux(9), 1, 6 }, 96 { pinmux(9), 1, 7 }, 97 { pinmux(12), 1, 5 }, 98 { pinmux(12), 1, 6 } 99 }; 100 #endif 101 102 static const struct pinmux_resource pinmuxes[] = { 103 #ifdef CONFIG_SPI_FLASH 104 PINMUX_ITEM(spi1_pins), 105 #endif 106 PINMUX_ITEM(uart_pins), 107 PINMUX_ITEM(i2c_pins), 108 #ifdef CONFIG_NAND_DAVINCI 109 PINMUX_ITEM(nand_pins), 110 #endif 111 }; 112 113 static const struct lpsc_resource lpsc[] = { 114 { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */ 115 { DAVINCI_LPSC_SPI1 }, /* Serial Flash */ 116 { DAVINCI_LPSC_EMAC }, /* image download */ 117 { DAVINCI_LPSC_UART2 }, /* console */ 118 { DAVINCI_LPSC_GPIO }, 119 }; 120 121 int board_init(void) 122 { 123 #ifndef CONFIG_USE_IRQ 124 irq_init(); 125 #endif 126 127 128 #ifdef CONFIG_NAND_DAVINCI 129 /* 130 * NAND CS setup - cycle counts based on da850evm NAND timings in the 131 * Linux kernel @ 25MHz EMIFA 132 */ 133 writel((DAVINCI_ABCR_WSETUP(0) | 134 DAVINCI_ABCR_WSTROBE(0) | 135 DAVINCI_ABCR_WHOLD(0) | 136 DAVINCI_ABCR_RSETUP(0) | 137 DAVINCI_ABCR_RSTROBE(1) | 138 DAVINCI_ABCR_RHOLD(0) | 139 DAVINCI_ABCR_TA(0) | 140 DAVINCI_ABCR_ASIZE_8BIT), 141 &davinci_emif_regs->ab2cr); /* CS3 */ 142 #endif 143 144 /* arch number of the board */ 145 gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA850_EVM; 146 147 /* address of boot parameters */ 148 gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; 149 150 /* 151 * Power on required peripherals 152 * ARM does not have access by default to PSC0 and PSC1 153 * assuming here that the DSP bootloader has set the IOPU 154 * such that PSC access is available to ARM 155 */ 156 if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc))) 157 return 1; 158 159 /* setup the SUSPSRC for ARM to control emulation suspend */ 160 writel(readl(&davinci_syscfg_regs->suspsrc) & 161 ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | 162 DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | 163 DAVINCI_SYSCFG_SUSPSRC_UART2), 164 &davinci_syscfg_regs->suspsrc); 165 166 /* configure pinmux settings */ 167 if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes))) 168 return 1; 169 170 #ifdef CONFIG_DRIVER_TI_EMAC 171 if (davinci_configure_pin_mux(emac_pins, ARRAY_SIZE(emac_pins)) != 0) 172 return 1; 173 /* set cfgchip3 to select MII */ 174 writel(readl(&davinci_syscfg_regs->cfgchip3) & ~(1 << 8), 175 &davinci_syscfg_regs->cfgchip3); 176 #endif /* CONFIG_DRIVER_TI_EMAC */ 177 178 /* enable the console UART */ 179 writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | 180 DAVINCI_UART_PWREMU_MGMT_UTRST), 181 &davinci_uart2_ctrl_regs->pwremu_mgmt); 182 183 return 0; 184 } 185 186 #ifdef CONFIG_DRIVER_TI_EMAC 187 188 /* 189 * Initializes on-board ethernet controllers. 190 */ 191 int board_eth_init(bd_t *bis) 192 { 193 if (!davinci_emac_initialize()) { 194 printf("Error: Ethernet init failed!\n"); 195 return -1; 196 } 197 198 return 0; 199 } 200 #endif /* CONFIG_DRIVER_TI_EMAC */ 201