1 /* 2 * (C) Copyright 2012 3 * Corscience GmbH & Co. KG, <www.corscience.de> 4 * Thomas Weber <weber@corscience.de> 5 * Sunil Kumar <sunilsaini05@gmail.com> 6 * Shashi Ranjan <shashiranjanmca05@gmail.com> 7 * 8 * Derived from Devkit8000 code by 9 * Frederik Kriewitz <frederik@kriewitz.eu> 10 * 11 * See file CREDITS for list of people who contributed to this 12 * project. 13 * 14 * This program is free software; you can redistribute it and/or 15 * modify it under the terms of the GNU General Public License as 16 * published by the Free Software Foundation; either version 2 of 17 * the License, or (at your option) any later version. 18 * 19 * This program is distributed in the hope that it will be useful, 20 * but WITHOUT ANY WARRANTY; without even the implied warranty of 21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 22 * GNU General Public License for more details. 23 * 24 * You should have received a copy of the GNU General Public License 25 * along with this program; if not, write to the Free Software 26 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 27 * MA 02111-1307 USA 28 */ 29 #include <common.h> 30 #include <twl4030.h> 31 #include <asm/io.h> 32 #include <asm/arch/mmc_host_def.h> 33 #include <asm/arch/mux.h> 34 #include <asm/arch/sys_proto.h> 35 #include <asm/arch/mem.h> 36 #include "tricorder.h" 37 38 DECLARE_GLOBAL_DATA_PTR; 39 40 /* 41 * Routine: board_init 42 * Description: Early hardware init. 43 */ 44 int board_init(void) 45 { 46 gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ 47 /* boot param addr */ 48 gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); 49 50 return 0; 51 } 52 53 /* 54 * Routine: misc_init_r 55 * Description: Configure board specific parts 56 */ 57 int misc_init_r(void) 58 { 59 twl4030_power_init(); 60 #ifdef CONFIG_TWL4030_LED 61 twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON); 62 #endif 63 64 dieid_num_r(); 65 66 return 0; 67 } 68 69 /* 70 * Routine: set_muxconf_regs 71 * Description: Setting up the configuration Mux registers specific to the 72 * hardware. Many pins need to be moved from protect to primary 73 * mode. 74 */ 75 void set_muxconf_regs(void) 76 { 77 MUX_TRICORDER(); 78 } 79 80 #if defined(CONFIG_GENERIC_MMC) && !(defined(CONFIG_SPL_BUILD)) 81 int board_mmc_init(bd_t *bis) 82 { 83 return omap_mmc_init(0, 0, 0); 84 } 85 #endif 86 87 /* 88 * Routine: get_board_mem_timings 89 * Description: If we use SPL then there is no x-loader nor config header 90 * so we have to setup the DDR timings ourself on the first bank. This 91 * provides the timing values back to the function that configures 92 * the memory. We have either one or two banks of 128MB DDR. 93 */ 94 void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, 95 u32 *mr) 96 { 97 /* General SDRC config */ 98 *mcfg = MICRON_V_MCFG_165(128 << 20); 99 *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; 100 101 /* AC timings */ 102 *ctrla = MICRON_V_ACTIMA_165; 103 *ctrlb = MICRON_V_ACTIMB_165; 104 *mr = MICRON_V_MR_165; 105 } 106