1 /* 2 * Pinmux configuration for Compulab CM-T54 board 3 * 4 * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ 5 * 6 * Author: Dmitry Lifshitz <lifshitz@compulab.co.il> 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef _CM_T54_MUX_DATA_H 12 #define _CM_T54_MUX_DATA_H 13 14 #include <asm/arch/mux_omap5.h> 15 #include <asm/arch/sys_proto.h> 16 17 const struct pad_conf_entry core_padconf_array_essential[] = { 18 /* MMC1 - SD CARD */ 19 {SDCARD_CLK, (PTU | IEN | M0)}, /* SDCARD_CLK */ 20 {SDCARD_CMD, (PTU | IEN | M0)}, /* SDCARD_CMD */ 21 {SDCARD_DATA0, (PTU | IEN | M0)}, /* SDCARD_DATA0 */ 22 {SDCARD_DATA1, (PTU | IEN | M0)}, /* SDCARD_DATA1 */ 23 {SDCARD_DATA2, (PTU | IEN | M0)}, /* SDCARD_DATA2 */ 24 {SDCARD_DATA3, (PTU | IEN | M0)}, /* SDCARD_DATA3 */ 25 26 /* SD CARD CD and WP GPIOs*/ 27 {TIMER5_PWM_EVT, (PTU | IEN | M6)}, /* GPIO8_228 */ 28 {TIMER6_PWM_EVT, (PTU | IEN | M6)}, /* GPIO8_229 */ 29 30 /* MMC2 - eMMC */ 31 {EMMC_CLK, (PTU | IEN | M0)}, /* EMMC_CLK */ 32 {EMMC_CMD, (PTU | IEN | M0)}, /* EMMC_CMD */ 33 {EMMC_DATA0, (PTU | IEN | M0)}, /* EMMC_DATA0 */ 34 {EMMC_DATA1, (PTU | IEN | M0)}, /* EMMC_DATA1 */ 35 {EMMC_DATA2, (PTU | IEN | M0)}, /* EMMC_DATA2 */ 36 {EMMC_DATA3, (PTU | IEN | M0)}, /* EMMC_DATA3 */ 37 {EMMC_DATA4, (PTU | IEN | M0)}, /* EMMC_DATA4 */ 38 {EMMC_DATA5, (PTU | IEN | M0)}, /* EMMC_DATA5 */ 39 {EMMC_DATA6, (PTU | IEN | M0)}, /* EMMC_DATA6 */ 40 {EMMC_DATA7, (PTU | IEN | M0)}, /* EMMC_DATA7 */ 41 42 /* UART4 */ 43 {I2C5_SCL, (PTU | IEN | M2)}, /* UART4_RX */ 44 {I2C5_SDA, (M2)}, /* UART4_TX */ 45 46 /* Led */ 47 {HSI2_CAFLAG, (PTU | M6)}, /* GPIO3_80 */ 48 49 /* I2C1 */ 50 {I2C1_PMIC_SCL, (PTU | IEN | M0)}, /* I2C1_PMIC_SCL */ 51 {I2C1_PMIC_SDA, (PTU | IEN | M0)}, /* I2C1_PMIC_SDA */ 52 53 /* USBB2, USBB3 */ 54 {USBB2_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB2_HSIC_STROBE */ 55 {USBB2_HSIC_DATA, (PTU | IEN | M0)}, /* USBB2_HSIC_DATA */ 56 {USBB3_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB3_HSIC_STROBE */ 57 {USBB3_HSIC_DATA, (PTU | IEN | M0)}, /* USBB3_HSIC_DATA */ 58 59 /* USB Hub and USB Eth reset GPIOs */ 60 {HSI2_CAREADY, (PTD | M6)}, /* GPIO3_76 */ 61 {HSI2_ACDATA, (PTD | M6)}, /* GPIO3_83 */ 62 63 /* I2C4 */ 64 {I2C4_SCL, (PTU | IEN | M0)}, /* I2C4_SCL */ 65 {I2C4_SDA, (PTU | IEN | M0)}, /* I2C4_SDA */ 66 }; 67 68 const struct pad_conf_entry wkup_padconf_array_essential[] = { 69 {SR_PMIC_SCL, (PTU | IEN | M0)}, /* SR_PMIC_SCL */ 70 {SR_PMIC_SDA, (PTU | IEN | M0)}, /* SR_PMIC_SDA */ 71 {SYS_32K, (IEN | M0)}, /* SYS_32K */ 72 73 /* USB Hub clock */ 74 {FREF_CLK1_OUT, (PTD | IEN | M0)}, /* FREF_CLK1_OUT */ 75 }; 76 77 /* 78 * Routine: set_muxconf_regs_essential 79 * Description: setup board pinmux configuration. 80 */ 81 void set_muxconf_regs_essential(void) 82 { 83 do_set_mux((*ctrl)->control_padconf_core_base, 84 core_padconf_array_essential, 85 sizeof(core_padconf_array_essential) / 86 sizeof(struct pad_conf_entry)); 87 88 do_set_mux((*ctrl)->control_padconf_wkup_base, 89 wkup_padconf_array_essential, 90 sizeof(wkup_padconf_array_essential) / 91 sizeof(struct pad_conf_entry)); 92 } 93 94 #endif /* _CM_T54_MUX_DATA_H */ 95