xref: /openbmc/u-boot/board/compulab/cm_t35/cm_t35.c (revision 86bedaeb)
1 /*
2  * (C) Copyright 2011 - 2013 CompuLab, Ltd. <www.compulab.co.il>
3  *
4  * Authors: Mike Rapoport <mike@compulab.co.il>
5  *	    Igor Grinberg <grinberg@compulab.co.il>
6  *
7  * Derived from omap3evm and Beagle Board by
8  *	Manikandan Pillai <mani.pillai@ti.com>
9  *	Richard Woodruff <r-woodruff2@ti.com>
10  *	Syed Mohammed Khasim <x0khasim@ti.com>
11  *
12  * SPDX-License-Identifier:	GPL-2.0+
13  */
14 
15 #include <common.h>
16 #include <status_led.h>
17 #include <netdev.h>
18 #include <net.h>
19 #include <i2c.h>
20 #include <usb.h>
21 #include <mmc.h>
22 #include <splash.h>
23 #include <twl4030.h>
24 #include <linux/compiler.h>
25 
26 #include <asm/io.h>
27 #include <asm/errno.h>
28 #include <asm/arch/mem.h>
29 #include <asm/arch/mux.h>
30 #include <asm/arch/mmc_host_def.h>
31 #include <asm/arch/sys_proto.h>
32 #include <asm/mach-types.h>
33 #include <asm/ehci-omap.h>
34 #include <asm/gpio.h>
35 
36 #include "../common/common.h"
37 #include "../common/eeprom.h"
38 
39 DECLARE_GLOBAL_DATA_PTR;
40 
41 const omap3_sysinfo sysinfo = {
42 	DDR_DISCRETE,
43 	"CM-T3x board",
44 	"NAND",
45 };
46 
47 #ifdef CONFIG_SPL_BUILD
48 /*
49  * Routine: get_board_mem_timings
50  * Description: If we use SPL then there is no x-loader nor config header
51  * so we have to setup the DDR timings ourself on both banks.
52  */
53 void get_board_mem_timings(struct board_sdrc_timings *timings)
54 {
55 	timings->mr = MICRON_V_MR_165;
56 	timings->mcfg = MICRON_V_MCFG_200(256 << 20); /* raswidth 14 needed */
57 	timings->ctrla = MICRON_V_ACTIMA_165;
58 	timings->ctrlb = MICRON_V_ACTIMB_165;
59 	timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
60 }
61 #endif
62 
63 struct splash_location splash_locations[] = {
64 	{
65 		.name = "nand",
66 		.storage = SPLASH_STORAGE_NAND,
67 		.offset = 0x100000,
68 	},
69 };
70 
71 int splash_screen_prepare(void)
72 {
73 	return splash_source_load(splash_locations,
74 				  ARRAY_SIZE(splash_locations));
75 }
76 
77 /*
78  * Routine: board_init
79  * Description: hardware init.
80  */
81 int board_init(void)
82 {
83 	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
84 
85 	/* board id for Linux */
86 	if (get_cpu_family() == CPU_OMAP34XX)
87 		gd->bd->bi_arch_number = MACH_TYPE_CM_T35;
88 	else
89 		gd->bd->bi_arch_number = MACH_TYPE_CM_T3730;
90 
91 	/* boot param addr */
92 	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
93 
94 #if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
95 	status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
96 #endif
97 
98 	return 0;
99 }
100 
101 /*
102  * Routine: get_board_rev
103  * Description: read system revision
104  */
105 u32 get_board_rev(void)
106 {
107 	return cl_eeprom_get_board_rev();
108 };
109 
110 int misc_init_r(void)
111 {
112 	cl_print_pcb_info();
113 	dieid_num_r();
114 
115 	return 0;
116 }
117 
118 /*
119  * Routine: set_muxconf_regs
120  * Description: Setting up the configuration Mux registers specific to the
121  *		hardware. Many pins need to be moved from protect to primary
122  *		mode.
123  */
124 static void cm_t3x_set_common_muxconf(void)
125 {
126 	/* SDRC */
127 	MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)); /*SDRC_D0*/
128 	MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)); /*SDRC_D1*/
129 	MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)); /*SDRC_D2*/
130 	MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)); /*SDRC_D3*/
131 	MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)); /*SDRC_D4*/
132 	MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)); /*SDRC_D5*/
133 	MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)); /*SDRC_D6*/
134 	MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)); /*SDRC_D7*/
135 	MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)); /*SDRC_D8*/
136 	MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)); /*SDRC_D9*/
137 	MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)); /*SDRC_D10*/
138 	MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)); /*SDRC_D11*/
139 	MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)); /*SDRC_D12*/
140 	MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)); /*SDRC_D13*/
141 	MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)); /*SDRC_D14*/
142 	MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)); /*SDRC_D15*/
143 	MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)); /*SDRC_D16*/
144 	MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)); /*SDRC_D17*/
145 	MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)); /*SDRC_D18*/
146 	MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)); /*SDRC_D19*/
147 	MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)); /*SDRC_D20*/
148 	MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)); /*SDRC_D21*/
149 	MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)); /*SDRC_D22*/
150 	MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)); /*SDRC_D23*/
151 	MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)); /*SDRC_D24*/
152 	MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)); /*SDRC_D25*/
153 	MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)); /*SDRC_D26*/
154 	MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)); /*SDRC_D27*/
155 	MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)); /*SDRC_D28*/
156 	MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)); /*SDRC_D29*/
157 	MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)); /*SDRC_D30*/
158 	MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)); /*SDRC_D31*/
159 	MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)); /*SDRC_CLK*/
160 	MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)); /*SDRC_DQS0*/
161 	MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)); /*SDRC_DQS1*/
162 	MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)); /*SDRC_DQS2*/
163 	MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)); /*SDRC_DQS3*/
164 	MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0)); /*SDRC_CKE0*/
165 	MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTD | DIS | M7)); /*SDRC_CKE1*/
166 
167 	/* GPMC */
168 	MUX_VAL(CP(GPMC_A1),		(IDIS | PTU | EN  | M0)); /*GPMC_A1*/
169 	MUX_VAL(CP(GPMC_A2),		(IDIS | PTU | EN  | M0)); /*GPMC_A2*/
170 	MUX_VAL(CP(GPMC_A3),		(IDIS | PTU | EN  | M0)); /*GPMC_A3*/
171 	MUX_VAL(CP(GPMC_A4),		(IDIS | PTU | EN  | M0)); /*GPMC_A4*/
172 	MUX_VAL(CP(GPMC_A5),		(IDIS | PTU | EN  | M0)); /*GPMC_A5*/
173 	MUX_VAL(CP(GPMC_A6),		(IDIS | PTU | EN  | M0)); /*GPMC_A6*/
174 	MUX_VAL(CP(GPMC_A7),		(IDIS | PTU | EN  | M0)); /*GPMC_A7*/
175 	MUX_VAL(CP(GPMC_A8),		(IDIS | PTU | EN  | M0)); /*GPMC_A8*/
176 	MUX_VAL(CP(GPMC_A9),		(IDIS | PTU | EN  | M0)); /*GPMC_A9*/
177 	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | EN  | M0)); /*GPMC_A10*/
178 	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0)); /*GPMC_D0*/
179 	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0)); /*GPMC_D1*/
180 	MUX_VAL(CP(GPMC_D2),		(IEN  | PTU | EN  | M0)); /*GPMC_D2*/
181 	MUX_VAL(CP(GPMC_D3),		(IEN  | PTU | EN  | M0)); /*GPMC_D3*/
182 	MUX_VAL(CP(GPMC_D4),		(IEN  | PTU | EN  | M0)); /*GPMC_D4*/
183 	MUX_VAL(CP(GPMC_D5),		(IEN  | PTU | EN  | M0)); /*GPMC_D5*/
184 	MUX_VAL(CP(GPMC_D6),		(IEN  | PTU | EN  | M0)); /*GPMC_D6*/
185 	MUX_VAL(CP(GPMC_D7),		(IEN  | PTU | EN  | M0)); /*GPMC_D7*/
186 	MUX_VAL(CP(GPMC_D8),		(IEN  | PTU | EN  | M0)); /*GPMC_D8*/
187 	MUX_VAL(CP(GPMC_D9),		(IEN  | PTU | EN  | M0)); /*GPMC_D9*/
188 	MUX_VAL(CP(GPMC_D10),		(IEN  | PTU | EN  | M0)); /*GPMC_D10*/
189 	MUX_VAL(CP(GPMC_D11),		(IEN  | PTU | EN  | M0)); /*GPMC_D11*/
190 	MUX_VAL(CP(GPMC_D12),		(IEN  | PTU | EN  | M0)); /*GPMC_D12*/
191 	MUX_VAL(CP(GPMC_D13),		(IEN  | PTU | EN  | M0)); /*GPMC_D13*/
192 	MUX_VAL(CP(GPMC_D14),		(IEN  | PTU | EN  | M0)); /*GPMC_D14*/
193 	MUX_VAL(CP(GPMC_D15),		(IEN  | PTU | EN  | M0)); /*GPMC_D15*/
194 	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)); /*GPMC_nCS0*/
195 
196 	/* SB-T35 Ethernet */
197 	MUX_VAL(CP(GPMC_NCS4),		(IEN  | PTU | EN  | M0)); /*GPMC_nCS4*/
198 
199 	/* DVI enable */
200 	MUX_VAL(CP(GPMC_NCS3),		(IDIS  | PTU | DIS  | M4));/*GPMC_nCS3*/
201 
202 	/* DataImage backlight */
203 	MUX_VAL(CP(GPMC_NCS7),		(IDIS  | PTU | DIS  | M4));/*GPIO_58*/
204 
205 	/* CM-T3x Ethernet */
206 	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTU | DIS | M0)); /*GPMC_nCS5*/
207 	MUX_VAL(CP(GPMC_CLK),		(IEN  | PTD | DIS | M4)); /*GPIO_59*/
208 	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)); /*nADV_ALE*/
209 	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)); /*nOE*/
210 	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)); /*nWE*/
211 	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTU | EN  | M0)); /*nBE0_CLE*/
212 	MUX_VAL(CP(GPMC_NBE1),		(IDIS | PTD | DIS | M4)); /*GPIO_61*/
213 	MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M0)); /*nWP*/
214 	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M0)); /*WAIT0*/
215 
216 	/* DSS */
217 	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)); /*DSS_PCLK*/
218 	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)); /*DSS_HSYNC*/
219 	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)); /*DSS_VSYNC*/
220 	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)); /*DSS_ACBIAS*/
221 	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)); /*DSS_DATA6*/
222 	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)); /*DSS_DATA7*/
223 	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)); /*DSS_DATA8*/
224 	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)); /*DSS_DATA9*/
225 	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)); /*DSS_DATA10*/
226 	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)); /*DSS_DATA11*/
227 	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)); /*DSS_DATA12*/
228 	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)); /*DSS_DATA13*/
229 	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)); /*DSS_DATA14*/
230 	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)); /*DSS_DATA15*/
231 	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)); /*DSS_DATA16*/
232 	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)); /*DSS_DATA17*/
233 
234 	/* serial interface */
235 	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)); /*UART3_RX*/
236 	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)); /*UART3_TX*/
237 
238 	/* mUSB */
239 	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)); /*HSUSB0_CLK*/
240 	MUX_VAL(CP(HSUSB0_STP),		(IDIS | PTU | EN  | M0)); /*HSUSB0_STP*/
241 	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)); /*HSUSB0_DIR*/
242 	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTD | DIS | M0)); /*HSUSB0_NXT*/
243 	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)); /*HSUSB0_DATA0*/
244 	MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)); /*HSUSB0_DATA1*/
245 	MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)); /*HSUSB0_DATA2*/
246 	MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)); /*HSUSB0_DATA3*/
247 	MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)); /*HSUSB0_DATA4*/
248 	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)); /*HSUSB0_DATA5*/
249 	MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)); /*HSUSB0_DATA6*/
250 	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)); /*HSUSB0_DATA7*/
251 
252 	/* USB EHCI */
253 	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DT0*/
254 	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DT1*/
255 	MUX_VAL(CP(ETK_D2_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DT2*/
256 	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DT3*/
257 	MUX_VAL(CP(ETK_D4_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DT4*/
258 	MUX_VAL(CP(ETK_D5_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DT5*/
259 	MUX_VAL(CP(ETK_D6_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DT6*/
260 	MUX_VAL(CP(ETK_D3_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DT7*/
261 	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DIR*/
262 	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_NXT*/
263 	MUX_VAL(CP(ETK_CTL_ES2),	(IDIS | PTD | DIS | M3)); /*HSUSB1_CLK*/
264 	MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTU | DIS | M3)); /*HSUSB1_STP*/
265 
266 	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | EN  | M3)); /*HSUSB2_DT0*/
267 	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | EN  | M3)); /*HSUSB2_DT1*/
268 	MUX_VAL(CP(MCSPI1_CS3),		(IEN  | PTD | EN  | M3)); /*HSUSB2_DT2*/
269 	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTD | EN  | M3)); /*HSUSB2_DT3*/
270 	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTD | EN  | M3)); /*HSUSB2_DT4*/
271 	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTD | EN  | M3)); /*HSUSB2_DT5*/
272 	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTD | EN  | M3)); /*HSUSB2_DT6*/
273 	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTD | EN  | M3)); /*HSUSB2_DT7*/
274 	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | EN  | M3)); /*HSUSB2_DIR*/
275 	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTD | EN  | M3)); /*HSUSB2_NXT*/
276 	MUX_VAL(CP(ETK_D10_ES2),	(IDIS | PTD | DIS | M3)); /*HSUSB2_CLK*/
277 	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTU | DIS | M3)); /*HSUSB2_STP*/
278 
279 	/* SB_T35_USB_HUB_RESET_GPIO */
280 	MUX_VAL(CP(CAM_WEN),		(IDIS | PTD | DIS | M4)); /*GPIO_167*/
281 
282 	/* I2C1 */
283 	MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)); /*I2C1_SCL*/
284 	MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)); /*I2C1_SDA*/
285 	/* I2C2 */
286 	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0)); /*I2C2_SCL*/
287 	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0)); /*I2C2_SDA*/
288 	/* I2C3 */
289 	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)); /*I2C3_SCL*/
290 	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)); /*I2C3_SDA*/
291 
292 	/* control and debug */
293 	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)); /*SYS_32K*/
294 	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)); /*SYS_CLKREQ*/
295 	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)); /*SYS_nIRQ*/
296 	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)); /*OFF_MODE*/
297 	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)); /*CLKOUT1*/
298 	MUX_VAL(CP(SYS_CLKOUT2),	(IDIS | PTU | DIS | M4)); /*green LED*/
299 	MUX_VAL(CP(JTAG_NTRST),		(IEN  | PTD | DIS | M0)); /*JTAG_NTRST*/
300 	MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)); /*JTAG_TCK*/
301 	MUX_VAL(CP(JTAG_TMS),		(IEN  | PTD | DIS | M0)); /*JTAG_TMS*/
302 	MUX_VAL(CP(JTAG_TDI),		(IEN  | PTD | DIS | M0)); /*JTAG_TDI*/
303 
304 	/* MMC1 */
305 	MUX_VAL(CP(MMC1_CLK),		(IDIS | PTU | EN  | M0)); /*MMC1_CLK*/
306 	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | EN  | M0)); /*MMC1_CMD*/
307 	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | EN  | M0)); /*MMC1_DAT0*/
308 	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | EN  | M0)); /*MMC1_DAT1*/
309 	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | EN  | M0)); /*MMC1_DAT2*/
310 	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | EN  | M0)); /*MMC1_DAT3*/
311 
312 	/* SPI */
313 	MUX_VAL(CP(MCBSP1_CLKR),	(IEN | PTD | DIS | M1)); /*MCSPI4_CLK*/
314 	MUX_VAL(CP(MCBSP1_DX),		(IEN | PTD | DIS | M1)); /*MCSPI4_SIMO*/
315 	MUX_VAL(CP(MCBSP1_DR),		(IEN | PTD | DIS | M1)); /*MCSPI4_SOMI*/
316 	MUX_VAL(CP(MCBSP1_FSX),		(IEN | PTU | EN  | M1)); /*MCSPI4_CS0*/
317 
318 	/* display controls */
319 	MUX_VAL(CP(MCBSP1_FSR),		(IDIS | PTU | DIS | M4)); /*GPIO_157*/
320 }
321 
322 static void cm_t35_set_muxconf(void)
323 {
324 	/* DSS */
325 	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)); /*DSS_DATA0*/
326 	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)); /*DSS_DATA1*/
327 	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)); /*DSS_DATA2*/
328 	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)); /*DSS_DATA3*/
329 	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)); /*DSS_DATA4*/
330 	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)); /*DSS_DATA5*/
331 
332 	MUX_VAL(CP(DSS_DATA18),         (IDIS | PTD | DIS | M0)); /*DSS_DATA18*/
333 	MUX_VAL(CP(DSS_DATA19),         (IDIS | PTD | DIS | M0)); /*DSS_DATA19*/
334 	MUX_VAL(CP(DSS_DATA20),         (IDIS | PTD | DIS | M0)); /*DSS_DATA20*/
335 	MUX_VAL(CP(DSS_DATA21),         (IDIS | PTD | DIS | M0)); /*DSS_DATA21*/
336 	MUX_VAL(CP(DSS_DATA22),         (IDIS | PTD | DIS | M0)); /*DSS_DATA22*/
337 	MUX_VAL(CP(DSS_DATA23),         (IDIS | PTD | DIS | M0)); /*DSS_DATA23*/
338 
339 	/* MMC1 */
340 	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M0)); /*MMC1_DAT4*/
341 	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M0)); /*MMC1_DAT5*/
342 	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M0)); /*MMC1_DAT6*/
343 	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M0)); /*MMC1_DAT7*/
344 }
345 
346 static void cm_t3730_set_muxconf(void)
347 {
348 	/* DSS */
349 	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M3)); /*DSS_DATA0*/
350 	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M3)); /*DSS_DATA1*/
351 	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M3)); /*DSS_DATA2*/
352 	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M3)); /*DSS_DATA3*/
353 	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M3)); /*DSS_DATA4*/
354 	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M3)); /*DSS_DATA5*/
355 
356 	MUX_VAL(CP(SYS_BOOT0),		(IDIS | PTD | DIS | M3)); /*DSS_DATA18*/
357 	MUX_VAL(CP(SYS_BOOT1),		(IDIS | PTD | DIS | M3)); /*DSS_DATA19*/
358 	MUX_VAL(CP(SYS_BOOT3),		(IDIS | PTD | DIS | M3)); /*DSS_DATA20*/
359 	MUX_VAL(CP(SYS_BOOT4),		(IDIS | PTD | DIS | M3)); /*DSS_DATA21*/
360 	MUX_VAL(CP(SYS_BOOT5),		(IDIS | PTD | DIS | M3)); /*DSS_DATA22*/
361 	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M3)); /*DSS_DATA23*/
362 }
363 
364 void set_muxconf_regs(void)
365 {
366 	cm_t3x_set_common_muxconf();
367 
368 	if (get_cpu_family() == CPU_OMAP34XX)
369 		cm_t35_set_muxconf();
370 	else
371 		cm_t3730_set_muxconf();
372 }
373 
374 #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
375 #define SB_T35_WP_GPIO 59
376 
377 int board_mmc_getcd(struct mmc *mmc)
378 {
379 	u8 val;
380 
381 	if (twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO, &val))
382 		return -1;
383 
384 	return !(val & 1);
385 }
386 
387 int board_mmc_init(bd_t *bis)
388 {
389 	return omap_mmc_init(0, 0, 0, -1, SB_T35_WP_GPIO);
390 }
391 #endif
392 
393 #if defined(CONFIG_GENERIC_MMC)
394 void board_mmc_power_init(void)
395 {
396 	twl4030_power_mmc_init(0);
397 }
398 #endif
399 
400 #ifdef CONFIG_SYS_I2C_OMAP34XX
401 /*
402  * Routine: reset_net_chip
403  * Description: reset the Ethernet controller via TPS65930 GPIO
404  */
405 static int cm_t3x_reset_net_chip(int gpio)
406 {
407 	/* Set GPIO1 of TPS65930 as output */
408 	twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x03,
409 			     0x02);
410 	/* Send a pulse on the GPIO pin */
411 	twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x0C,
412 			     0x02);
413 	udelay(1);
414 	twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x09,
415 			     0x02);
416 	mdelay(40);
417 	twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x0C,
418 			     0x02);
419 	mdelay(1);
420 	return 0;
421 }
422 #else
423 static inline int cm_t3x_reset_net_chip(int gpio) { return 0; }
424 #endif
425 
426 #ifdef CONFIG_SMC911X
427 /*
428  * Routine: handle_mac_address
429  * Description: prepare MAC address for on-board Ethernet.
430  */
431 static int handle_mac_address(void)
432 {
433 	unsigned char enetaddr[6];
434 	int rc;
435 
436 	rc = eth_getenv_enetaddr("ethaddr", enetaddr);
437 	if (rc)
438 		return 0;
439 
440 	rc = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS);
441 	if (rc)
442 		return rc;
443 
444 	if (!is_valid_ether_addr(enetaddr))
445 		return -1;
446 
447 	return eth_setenv_enetaddr("ethaddr", enetaddr);
448 }
449 
450 /*
451  * Routine: board_eth_init
452  * Description: initialize module and base-board Ethernet chips
453  */
454 int board_eth_init(bd_t *bis)
455 {
456 	int rc = 0, rc1 = 0;
457 
458 	rc1 = handle_mac_address();
459 	if (rc1)
460 		printf("No MAC address found! ");
461 
462 	rc1 = cl_omap3_smc911x_init(0, 5, CM_T3X_SMC911X_BASE,
463 				    cm_t3x_reset_net_chip, -EINVAL);
464 	if (rc1 > 0)
465 		rc++;
466 
467 	rc1 = cl_omap3_smc911x_init(1, 4, SB_T35_SMC911X_BASE, NULL, -EINVAL);
468 	if (rc1 > 0)
469 		rc++;
470 
471 	return rc;
472 }
473 #endif
474 
475 #ifdef CONFIG_USB_EHCI_OMAP
476 struct omap_usbhs_board_data usbhs_bdata = {
477 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
478 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
479 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
480 };
481 
482 #define SB_T35_USB_HUB_RESET_GPIO	167
483 int ehci_hcd_init(int index, enum usb_init_type init,
484 		  struct ehci_hccr **hccr, struct ehci_hcor **hcor)
485 {
486 	u8 val;
487 	int offset;
488 
489 	cl_usb_hub_init(SB_T35_USB_HUB_RESET_GPIO, "sb-t35 hub rst");
490 
491 	offset = TWL4030_BASEADD_GPIO + TWL4030_GPIO_GPIODATADIR1;
492 	twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, offset, &val);
493 	/* Set GPIO6 and GPIO7 of TPS65930 as output */
494 	val |= 0xC0;
495 	twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, offset, val);
496 	offset = TWL4030_BASEADD_GPIO + TWL4030_GPIO_SETGPIODATAOUT1;
497 	/* Take both PHYs out of reset */
498 	twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, offset, 0xC0);
499 	udelay(1);
500 
501 	return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
502 }
503 
504 int ehci_hcd_stop(void)
505 {
506 	cl_usb_hub_deinit(SB_T35_USB_HUB_RESET_GPIO);
507 	return omap_ehci_hcd_stop();
508 }
509 #endif /* CONFIG_USB_EHCI_OMAP */
510