1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Code used by both U-Boot and SPL for Compulab CM-FX6 4 * 5 * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ 6 * 7 * Author: Nikita Kiryanov <nikita@compulab.co.il> 8 */ 9 10 #include <common.h> 11 #include <asm/arch/sys_proto.h> 12 #include <asm/gpio.h> 13 #include <asm/mach-imx/spi.h> 14 #include <fsl_esdhc.h> 15 #include "common.h" 16 17 #ifdef CONFIG_FSL_ESDHC 18 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ 19 PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ 20 PAD_CTL_SRE_FAST | PAD_CTL_HYS) 21 22 static iomux_v3_cfg_t const usdhc_pads[] = { 23 IOMUX_PADS(PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 24 IOMUX_PADS(PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 25 IOMUX_PADS(PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 26 IOMUX_PADS(PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 27 IOMUX_PADS(PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 28 IOMUX_PADS(PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 29 30 IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 31 IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 32 IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 33 IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 34 IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 35 IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 36 37 IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 38 IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 39 IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 40 IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 41 IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 42 IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 43 IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 44 IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 45 IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 46 IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 47 }; 48 49 void cm_fx6_set_usdhc_iomux(void) 50 { 51 SETUP_IOMUX_PADS(usdhc_pads); 52 } 53 54 /* CINS bit doesn't work, so always try to access the MMC card */ 55 int board_mmc_getcd(struct mmc *mmc) 56 { 57 return 1; 58 } 59 #endif 60 61 #ifdef CONFIG_MXC_SPI 62 #define ECSPI_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_SPEED_MED | \ 63 PAD_CTL_PUS_100K_DOWN | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 64 65 static iomux_v3_cfg_t const ecspi_pads[] = { 66 IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(ECSPI_PAD_CTRL)), 67 IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(ECSPI_PAD_CTRL)), 68 IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(ECSPI_PAD_CTRL)), 69 IOMUX_PADS(PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(ECSPI_PAD_CTRL)), 70 IOMUX_PADS(PAD_EIM_D19__ECSPI1_SS1 | MUX_PAD_CTRL(ECSPI_PAD_CTRL)), 71 }; 72 73 void cm_fx6_set_ecspi_iomux(void) 74 { 75 SETUP_IOMUX_PADS(ecspi_pads); 76 } 77 78 int board_spi_cs_gpio(unsigned bus, unsigned cs) 79 { 80 return (bus == 0 && cs == 0) ? (CM_FX6_ECSPI_BUS0_CS0) : -1; 81 } 82 #endif 83