1 /* 2 * Pinmux configuration for CompuLab CL-SOM-AM57x board 3 * 4 * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/ 5 * 6 * Author: Dmitry Lifshitz <lifshitz@compulab.co.il> 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 #include <asm/arch/sys_proto.h> 11 #include <asm/arch/mux_dra7xx.h> 12 13 /* Serial console */ 14 static const struct pad_conf_entry cl_som_am57x_padconf_console[] = { 15 {UART3_RXD, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* UART3_RXD */ 16 {UART3_TXD, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* UART3_TXD */ 17 }; 18 19 /* PMIC I2C */ 20 static const struct pad_conf_entry cl_som_am57x_padconf_pmic[] = { 21 {MCASP1_ACLKR, (M10 | PIN_INPUT)}, /* MCASP1_ACLKR.I2C4_SDA */ 22 {MCASP1_FSR, (M10 | PIN_INPUT)}, /* MCASP1_FSR.I2C4_SCL */ 23 }; 24 25 /* Green GPIO led */ 26 static const struct pad_conf_entry cl_som_am57x_padconf_green_led[] = { 27 {GPMC_A15, (M14 | PIN_OUTPUT_PULLDOWN)}, /* GPMC_A15.GPIO2_5 */ 28 }; 29 30 /* MMC/SD Card */ 31 static const struct pad_conf_entry cl_som_am57x_padconf_sd_card[] = { 32 {MMC1_CLK, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_CLK */ 33 {MMC1_CMD, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_CMD */ 34 {MMC1_DAT0, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT0 */ 35 {MMC1_DAT1, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT1 */ 36 {MMC1_DAT2, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT2 */ 37 {MMC1_DAT3, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT3 */ 38 {MMC1_SDCD, (M14 | PIN_INPUT) }, /* MMC1_SDCD */ 39 {MMC1_SDWP, (M14 | PIN_INPUT) }, /* MMC1_SDWP */ 40 }; 41 42 /* WiFi - must be in the safe mode on boot */ 43 static const struct pad_conf_entry cl_som_am57x_padconf_wifi[] = { 44 {UART1_CTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART1_CTSN */ 45 {UART1_RTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART1_RTSN */ 46 {UART2_RXD, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_RXD */ 47 {UART2_TXD, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_TXD */ 48 {UART2_CTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_CTSN */ 49 {UART2_RTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_RTSN */ 50 }; 51 52 /* QSPI */ 53 static const struct pad_conf_entry cl_som_am57x_padconf_qspi[] = { 54 {GPMC_A13, (M1 | PIN_INPUT) }, /* GPMC_A13.QSPI1_RTCLK */ 55 {GPMC_A18, (M1 | PIN_INPUT) }, /* GPMC_A18.QSPI1_SCLK */ 56 {GPMC_A16, (M1 | PIN_INPUT) }, /* GPMC_A16.QSPI1_D0 */ 57 {GPMC_A17, (M1 | PIN_INPUT) }, /* GPMC_A17.QSPI1_D1 */ 58 {GPMC_CS2, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_CS2.QSPI1_CS0 */ 59 }; 60 61 /* GPIO Expander I2C */ 62 static const struct pad_conf_entry cl_som_am57x_padconf_i2c_gpio[] = { 63 {MCASP1_AXR0, (M10 | PIN_INPUT)}, /* MCASP1_AXR0.I2C5_SDA */ 64 {MCASP1_AXR1, (M10 | PIN_INPUT)}, /* MCASP1_AXR1.I2C5_SCL */ 65 }; 66 67 /* eMMC internal storage */ 68 static const struct pad_conf_entry cl_som_am57x_padconf_emmc[] = { 69 {GPMC_A19, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A19.MMC2_DAT4 */ 70 {GPMC_A20, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A20.MMC2_DAT5 */ 71 {GPMC_A21, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A21.MMC2_DAT6 */ 72 {GPMC_A22, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A22.MMC2_DAT7 */ 73 {GPMC_A23, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A23.MMC2_CLK */ 74 {GPMC_A24, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A24.MMC2_DAT0 */ 75 {GPMC_A25, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A25.MMC2_DAT1 */ 76 {GPMC_A26, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A26.MMC2_DAT2 */ 77 {GPMC_A27, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A27.MMC2_DAT3 */ 78 {GPMC_CS1, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_CS1.MMC2_CMD */ 79 }; 80 81 /* usb1_drvvbus */ 82 static const struct pad_conf_entry cl_som_am57x_padconf_usb[] = { 83 /* USB1_DRVVBUS.USB1_DRVVBUS */ 84 {USB1_DRVVBUS, (M0 | PIN_OUTPUT_PULLDOWN | SLEWCONTROL) }, 85 }; 86 87 /* Ethernet */ 88 static const struct pad_conf_entry cl_som_am57x_padconf_ethernet[] = { 89 /* MDIO bus */ 90 {VIN2A_D10, (M3 | PIN_OUTPUT_PULLUP) }, /* VIN2A_D10.MDIO_MCLK */ 91 {VIN2A_D11, (M3 | PIN_INPUT_PULLUP) }, /* VIN2A_D11.MDIO_D */ 92 /* EMAC Slave 1 at addr 0x1 - Default interface */ 93 {VIN2A_D12, (M3 | PIN_OUTPUT) }, /* VIN2A_D12.RGMII1_TXC */ 94 {VIN2A_D13, (M3 | PIN_OUTPUT) }, /* VIN2A_D13.RGMII1_TXCTL */ 95 {VIN2A_D14, (M3 | PIN_OUTPUT) }, /* VIN2A_D14.RGMII1_TXD3 */ 96 {VIN2A_D15, (M3 | PIN_OUTPUT) }, /* VIN2A_D15.RGMII1_TXD2 */ 97 {VIN2A_D16, (M3 | PIN_OUTPUT) }, /* VIN2A_D16.RGMII1_TXD1 */ 98 {VIN2A_D17, (M3 | PIN_OUTPUT) }, /* VIN2A_D17.RGMII1_TXD0 */ 99 {VIN2A_D18, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D18.RGMII1_RXC */ 100 {VIN2A_D19, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D19.RGMII1_RXCTL */ 101 {VIN2A_D20, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D20.RGMII1_RXD3 */ 102 {VIN2A_D21, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D21.RGMII1_RXD2 */ 103 {VIN2A_D22, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D22.RGMII1_RXD1 */ 104 {VIN2A_D23, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D23.RGMII1_RXD0 */ 105 /* Eth PHY1 reset GPIOs*/ 106 {VIN2A_CLK0, (M14 | PIN_OUTPUT_PULLDOWN)}, /* VIN2A_CLK0.GPIO3_28 */ 107 }; 108 109 #define SET_MUX(mux_array) do_set_mux32((*ctrl)->control_padconf_core_base, \ 110 mux_array, ARRAY_SIZE(mux_array)) 111 112 void set_muxconf_regs(void) 113 { 114 SET_MUX(cl_som_am57x_padconf_console); 115 SET_MUX(cl_som_am57x_padconf_pmic); 116 SET_MUX(cl_som_am57x_padconf_green_led); 117 SET_MUX(cl_som_am57x_padconf_sd_card); 118 SET_MUX(cl_som_am57x_padconf_wifi); 119 SET_MUX(cl_som_am57x_padconf_qspi); 120 SET_MUX(cl_som_am57x_padconf_i2c_gpio); 121 SET_MUX(cl_som_am57x_padconf_emmc); 122 SET_MUX(cl_som_am57x_padconf_usb); 123 SET_MUX(cl_som_am57x_padconf_ethernet); 124 } 125