1 /* 2 * Ethernet specific code for CompuLab CL-SOM-AM57x module 3 * 4 * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/ 5 * 6 * Author: Uri Mashiach <uri.mashiach@compulab.co.il> 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #include <common.h> 12 #include <cpsw.h> 13 #include <miiphy.h> 14 #include <asm/gpio.h> 15 #include <asm/arch/sys_proto.h> 16 #include "../common/eeprom.h" 17 18 static void cpsw_control(int enabled) 19 { 20 /* VTP can be added here */ 21 } 22 23 static struct cpsw_slave_data cl_som_am57x_cpsw_slaves[] = { 24 { 25 .slave_reg_ofs = 0x208, 26 .sliver_reg_ofs = 0xd80, 27 .phy_addr = 0, 28 .phy_if = PHY_INTERFACE_MODE_RMII, 29 }, 30 { 31 .slave_reg_ofs = 0x308, 32 .sliver_reg_ofs = 0xdc0, 33 .phy_addr = 1, 34 .phy_if = PHY_INTERFACE_MODE_RMII, 35 36 }, 37 }; 38 39 static struct cpsw_platform_data cl_som_am57_cpsw_data = { 40 .mdio_base = CPSW_MDIO_BASE, 41 .cpsw_base = CPSW_BASE, 42 .mdio_div = 0xff, 43 .channels = 8, 44 .cpdma_reg_ofs = 0x800, 45 .slaves = 2, 46 .slave_data = cl_som_am57x_cpsw_slaves, 47 .ale_reg_ofs = 0xd00, 48 .ale_entries = 1024, 49 .host_port_reg_ofs = 0x108, 50 .hw_stats_reg_ofs = 0x900, 51 .bd_ram_ofs = 0x2000, 52 .mac_control = (1 << 5), 53 .control = cpsw_control, 54 .host_port_num = 0, 55 .version = CPSW_CTRL_VERSION_2, 56 }; 57 58 /* 59 * cl_som_am57x_efuse_read_mac_addr() - read Ethernet port MAC address. 60 * The information is retrieved from the SOC's registers. 61 * @buff: read buffer. 62 * @port_num: port number. 63 */ 64 static void cl_som_am57x_efuse_read_mac_addr(uchar *buff, uint port_num) 65 { 66 uint32_t mac_hi, mac_lo; 67 68 if (port_num) { 69 mac_lo = readl((*ctrl)->control_core_mac_id_1_lo); 70 mac_hi = readl((*ctrl)->control_core_mac_id_1_hi); 71 } else { 72 mac_lo = readl((*ctrl)->control_core_mac_id_0_lo); 73 mac_hi = readl((*ctrl)->control_core_mac_id_0_hi); 74 } 75 76 buff[0] = (mac_hi & 0xFF0000) >> 16; 77 buff[1] = (mac_hi & 0xFF00) >> 8; 78 buff[2] = mac_hi & 0xFF; 79 buff[3] = (mac_lo & 0xFF0000) >> 16; 80 buff[4] = (mac_lo & 0xFF00) >> 8; 81 buff[5] = mac_lo & 0xFF; 82 } 83 84 /* 85 * cl_som_am57x_handle_mac_address() - set MAC address in the U-Boot 86 * environment. 87 * The address is retrieved retrieved from an EEPROM field or from the 88 * SOC's registers. 89 * @env_name: U-Boot environment name. 90 * @field_name: EEPROM field name. 91 * @port_num: SOC's port number. 92 */ 93 static int cl_som_am57x_handle_mac_address(char *env_name, uint port_num) 94 { 95 int ret; 96 uint8_t enetaddr[6]; 97 98 ret = eth_env_get_enetaddr(env_name, enetaddr); 99 if (ret) 100 return 0; 101 102 ret = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS); 103 104 if (ret || !is_valid_ethaddr(enetaddr)) 105 cl_som_am57x_efuse_read_mac_addr(enetaddr, port_num); 106 107 if (!is_valid_ethaddr(enetaddr)) 108 return -1; 109 110 ret = eth_env_set_enetaddr(env_name, enetaddr); 111 if (ret) 112 printf("cl-som-am57x: Failed to set Eth port %d MAC address\n", 113 port_num); 114 115 return ret; 116 } 117 118 #define CL_SOM_AM57X_PHY_ADDR2 0x01 119 #define AR8033_PHY_DEBUG_ADDR_REG 0x1d 120 #define AR8033_PHY_DEBUG_DATA_REG 0x1e 121 #define AR8033_DEBUG_RGMII_RX_CLK_DLY_REG 0x00 122 #define AR8033_DEBUG_RGMII_TX_CLK_DLY_REG 0x05 123 #define AR8033_DEBUG_RGMII_RX_CLK_DLY_MASK (1 << 15) 124 #define AR8033_DEBUG_RGMII_TX_CLK_DLY_MASK (1 << 8) 125 126 /* 127 * cl_som_am57x_rgmii_clk_delay() - Set RGMII clock delay. 128 * Enable RX delay, disable TX delay. 129 */ 130 static void cl_som_am57x_rgmii_clk_delay(void) 131 { 132 uint16_t mii_reg_val; 133 const char *devname; 134 135 devname = miiphy_get_current_dev(); 136 /* PHY 2 */ 137 miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_ADDR_REG, 138 AR8033_DEBUG_RGMII_RX_CLK_DLY_REG); 139 miiphy_read(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG, 140 &mii_reg_val); 141 mii_reg_val |= AR8033_DEBUG_RGMII_RX_CLK_DLY_MASK; 142 miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG, 143 mii_reg_val); 144 145 miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_ADDR_REG, 146 AR8033_DEBUG_RGMII_TX_CLK_DLY_REG); 147 miiphy_read(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG, 148 &mii_reg_val); 149 mii_reg_val &= ~AR8033_DEBUG_RGMII_TX_CLK_DLY_MASK; 150 miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG, 151 mii_reg_val); 152 } 153 154 #define CL_SOM_AM57X_GPIO_PHY1_RST 92 /* GPIO3_28 */ 155 #define CL_SOM_AM57X_RGMII_PORT1 1 156 157 int board_eth_init(bd_t *bis) 158 { 159 int ret; 160 uint32_t ctrl_val; 161 char *cpsw_phy_envval; 162 int cpsw_act_phy = 1; 163 164 /* SB-SOM-AM57x primary Eth (P21) is routed to RGMII1 */ 165 ret = cl_som_am57x_handle_mac_address("ethaddr", 166 CL_SOM_AM57X_RGMII_PORT1); 167 168 if (ret) 169 return -1; 170 171 /* Select RGMII for GMII1_SEL */ 172 ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33); 173 ctrl_val |= 0x22; 174 writel(ctrl_val, (*ctrl)->control_core_control_io1); 175 mdelay(10); 176 177 gpio_request(CL_SOM_AM57X_GPIO_PHY1_RST, "phy1_rst"); 178 gpio_direction_output(CL_SOM_AM57X_GPIO_PHY1_RST, 0); 179 mdelay(20); 180 181 gpio_set_value(CL_SOM_AM57X_GPIO_PHY1_RST, 1); 182 mdelay(20); 183 184 cpsw_phy_envval = env_get("cpsw_phy"); 185 if (cpsw_phy_envval != NULL) 186 cpsw_act_phy = simple_strtoul(cpsw_phy_envval, NULL, 0); 187 188 cl_som_am57_cpsw_data.active_slave = cpsw_act_phy; 189 190 ret = cpsw_register(&cl_som_am57_cpsw_data); 191 if (ret < 0) 192 printf("Error %d registering CPSW switch\n", ret); 193 194 /* Set RGMII clock delay */ 195 cl_som_am57x_rgmii_clk_delay(); 196 197 return ret; 198 } 199