1 /*
2  * Ethernet specific code for CompuLab CL-SOM-AM57x module
3  *
4  * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/
5  *
6  * Author: Uri Mashiach <uri.mashiach@compulab.co.il>
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #include <common.h>
12 #include <cpsw.h>
13 #include <miiphy.h>
14 #include <asm/gpio.h>
15 #include <asm/arch/sys_proto.h>
16 #include "../common/eeprom.h"
17 
18 static void cpsw_control(int enabled)
19 {
20 	/* VTP can be added here */
21 }
22 
23 static struct cpsw_slave_data cl_som_am57x_cpsw_slaves[] = {
24 	{
25 		.slave_reg_ofs	= 0x208,
26 		.sliver_reg_ofs	= 0xd80,
27 		.phy_addr	= 0,
28 		.phy_if         = PHY_INTERFACE_MODE_RMII,
29 	},
30 	{
31 		.slave_reg_ofs	= 0x308,
32 		.sliver_reg_ofs	= 0xdc0,
33 		.phy_addr	= 1,
34 		.phy_if         = PHY_INTERFACE_MODE_RMII,
35 
36 	},
37 };
38 
39 static struct cpsw_platform_data cl_som_am57_cpsw_data = {
40 	.mdio_base		= CPSW_MDIO_BASE,
41 	.cpsw_base		= CPSW_BASE,
42 	.mdio_div		= 0xff,
43 	.channels		= 8,
44 	.cpdma_reg_ofs		= 0x800,
45 	.slaves			= 2,
46 	.slave_data		= cl_som_am57x_cpsw_slaves,
47 	.ale_reg_ofs		= 0xd00,
48 	.ale_entries		= 1024,
49 	.host_port_reg_ofs	= 0x108,
50 	.hw_stats_reg_ofs	= 0x900,
51 	.bd_ram_ofs		= 0x2000,
52 	.mac_control		= (1 << 5),
53 	.control		= cpsw_control,
54 	.host_port_num		= 0,
55 	.version		= CPSW_CTRL_VERSION_2,
56 };
57 
58 /*
59  * cl_som_am57x_efuse_read_mac_addr() - read Ethernet port MAC address.
60  *       The information is retrieved from the SOC's registers.
61  * @buff: read buffer.
62  * @port_num: port number.
63  */
64 static void cl_som_am57x_efuse_read_mac_addr(uchar *buff, uint port_num)
65 {
66 	uint32_t mac_hi, mac_lo;
67 
68 	if (port_num) {
69 		mac_lo = readl((*ctrl)->control_core_mac_id_1_lo);
70 		mac_hi = readl((*ctrl)->control_core_mac_id_1_hi);
71 	} else {
72 		mac_lo = readl((*ctrl)->control_core_mac_id_0_lo);
73 		mac_hi = readl((*ctrl)->control_core_mac_id_0_hi);
74 	}
75 
76 	buff[0] = (mac_hi & 0xFF0000) >> 16;
77 	buff[1] = (mac_hi & 0xFF00) >> 8;
78 	buff[2] = mac_hi & 0xFF;
79 	buff[3] = (mac_lo & 0xFF0000) >> 16;
80 	buff[4] = (mac_lo & 0xFF00) >> 8;
81 	buff[5] = mac_lo & 0xFF;
82 }
83 
84 /*
85  * cl_som_am57x_handle_mac_address() - set MAC address in the U-Boot
86  *	environment.
87  *      The address is retrieved retrieved from an EEPROM field or from the
88  *	SOC's registers.
89  * @env_name: U-Boot environment name.
90  * @field_name: EEPROM field name.
91  * @port_num: SOC's port number.
92  */
93 static int cl_som_am57x_handle_mac_address(char *env_name, uint port_num)
94 {
95 	int ret;
96 	uint8_t enetaddr[6];
97 
98 	ret = eth_getenv_enetaddr(env_name, enetaddr);
99 	if (ret)
100 		return 0;
101 
102 	ret = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS);
103 
104 	if (ret || !is_valid_ethaddr(enetaddr))
105 		cl_som_am57x_efuse_read_mac_addr(enetaddr, port_num);
106 
107 	if (!is_valid_ethaddr(enetaddr))
108 		return -1;
109 
110 	ret = eth_setenv_enetaddr(env_name, enetaddr);
111 	if (ret)
112 		printf("cl-som-am57x: Failed to set Eth port %d MAC address\n",
113 		       port_num);
114 
115 	return ret;
116 }
117 
118 #define CL_SOM_AM57X_PHY_ADDR2			0x01
119 #define AR8033_PHY_DEBUG_ADDR_REG		0x1d
120 #define AR8033_PHY_DEBUG_DATA_REG		0x1e
121 #define AR8033_DEBUG_RGMII_RX_CLK_DLY_REG	0x00
122 #define AR8033_DEBUG_RGMII_TX_CLK_DLY_REG	0x05
123 #define AR8033_DEBUG_RGMII_RX_CLK_DLY_MASK	(1 << 15)
124 #define AR8033_DEBUG_RGMII_TX_CLK_DLY_MASK	(1 << 8)
125 
126 /*
127  * cl_som_am57x_rgmii_clk_delay() - Set RGMII clock delay.
128  *	Enable RX delay, disable TX delay.
129  */
130 static void cl_som_am57x_rgmii_clk_delay(void)
131 {
132 	uint16_t mii_reg_val;
133 	const char *devname;
134 
135 	devname = miiphy_get_current_dev();
136 	/* PHY 2 */
137 	miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_ADDR_REG,
138 		     AR8033_DEBUG_RGMII_RX_CLK_DLY_REG);
139 	miiphy_read(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG,
140 		    &mii_reg_val);
141 	mii_reg_val |= AR8033_DEBUG_RGMII_RX_CLK_DLY_MASK;
142 	miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG,
143 		     mii_reg_val);
144 
145 	miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_ADDR_REG,
146 		     AR8033_DEBUG_RGMII_TX_CLK_DLY_REG);
147 	miiphy_read(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG,
148 		    &mii_reg_val);
149 	mii_reg_val &= ~AR8033_DEBUG_RGMII_TX_CLK_DLY_MASK;
150 	miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG,
151 		     mii_reg_val);
152 }
153 
154 #define CL_SOM_AM57X_GPIO_PHY1_RST 92 /* GPIO3_28 */
155 #define CL_SOM_AM57X_RGMII_PORT1 1
156 
157 int board_eth_init(bd_t *bis)
158 {
159 	int ret;
160 	uint32_t ctrl_val;
161 	char *cpsw_phy_envval;
162 	int cpsw_act_phy = 1;
163 
164 	/* SB-SOM-AM57x primary Eth (P21) is routed to RGMII1 */
165 	ret = cl_som_am57x_handle_mac_address("ethaddr",
166 					      CL_SOM_AM57X_RGMII_PORT1);
167 
168 	if (ret)
169 		return -1;
170 
171 	/* Select RGMII for GMII1_SEL */
172 	ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33);
173 	ctrl_val |= 0x22;
174 	writel(ctrl_val, (*ctrl)->control_core_control_io1);
175 	mdelay(10);
176 
177 	gpio_request(CL_SOM_AM57X_GPIO_PHY1_RST, "phy1_rst");
178 	gpio_direction_output(CL_SOM_AM57X_GPIO_PHY1_RST, 0);
179 	mdelay(20);
180 
181 	gpio_set_value(CL_SOM_AM57X_GPIO_PHY1_RST, 1);
182 	mdelay(20);
183 
184 	cpsw_phy_envval = getenv("cpsw_phy");
185 	if (cpsw_phy_envval != NULL)
186 		cpsw_act_phy = simple_strtoul(cpsw_phy_envval, NULL, 0);
187 
188 	cl_som_am57_cpsw_data.active_slave = cpsw_act_phy;
189 
190 	ret = cpsw_register(&cl_som_am57_cpsw_data);
191 	if (ret < 0)
192 		printf("Error %d registering CPSW switch\n", ret);
193 
194 	/* Set RGMII clock delay */
195 	cl_som_am57x_rgmii_clk_delay();
196 
197 	return ret;
198 }
199