xref: /openbmc/u-boot/board/compal/paz00/paz00.c (revision 71a988aa)
1 /*
2  * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
3  *
4  * See file CREDITS for list of people who contributed to this
5  * project.
6  *
7  * This program is free software; you can redistribute it and/or modify it
8  * under the terms and conditions of the GNU General Public License,
9  * version 2, as published by the Free Software Foundation.
10  *
11  * This program is distributed in the hope it will be useful, but WITHOUT
12  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
14  * more details.
15  */
16 
17 #include <common.h>
18 #include <asm/io.h>
19 #include <asm/arch/tegra.h>
20 #include <asm/arch/pinmux.h>
21 #include <asm/arch-tegra/mmc.h>
22 #include <asm/gpio.h>
23 #ifdef CONFIG_TEGRA_MMC
24 #include <mmc.h>
25 #endif
26 
27 
28 #ifdef CONFIG_TEGRA_MMC
29 /*
30  * Routine: pin_mux_mmc
31  * Description: setup the pin muxes/tristate values for the SDMMC(s)
32  */
33 static void pin_mux_mmc(void)
34 {
35 	/* SDMMC4: config 3, x8 on 2nd set of pins */
36 	pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
37 	pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4);
38 	pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4);
39 
40 	pinmux_tristate_disable(PINGRP_ATB);
41 	pinmux_tristate_disable(PINGRP_GMA);
42 	pinmux_tristate_disable(PINGRP_GME);
43 
44 	/* SDIO1: SDIO1_CLK, SDIO1_CMD, SDIO1_DAT[3:0] */
45 	pinmux_set_func(PINGRP_SDIO1, PMUX_FUNC_SDIO1);
46 
47 	pinmux_tristate_disable(PINGRP_SDIO1);
48 
49 	/* For power GPIO PV1 */
50 	pinmux_tristate_disable(PINGRP_UAC);
51 	/* For CD GPIO PV5 */
52 	pinmux_tristate_disable(PINGRP_GPV);
53 }
54 
55 /* this is a weak define that we are overriding */
56 int board_mmc_init(bd_t *bd)
57 {
58 	debug("board_mmc_init called\n");
59 
60 	/* Enable muxes, etc. for SDMMC controllers */
61 	pin_mux_mmc();
62 
63 	debug("board_mmc_init: init eMMC\n");
64 	/* init dev 0, eMMC chip, with 8-bit bus */
65 	tegra_mmc_init(0, 8, -1, -1);
66 
67 	debug("board_mmc_init: init SD slot\n");
68 	/* init dev 3, SD slot, with 4-bit bus */
69 	tegra_mmc_init(3, 4, GPIO_PV1, GPIO_PV5);
70 
71 	return 0;
72 }
73 #endif
74