1 /* 2 * (C) Copyright 2000-2003 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 #include <common.h> 25 26 #define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE 27 #define FLASH_BANK_SIZE 0x200000 28 29 flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; 30 31 void flash_print_info (flash_info_t * info) 32 { 33 int i; 34 35 switch (info->flash_id & FLASH_VENDMASK) { 36 case (AMD_MANUFACT & FLASH_VENDMASK): 37 printf ("AMD: "); 38 break; 39 default: 40 printf ("Unknown Vendor "); 41 break; 42 } 43 44 switch (info->flash_id & FLASH_TYPEMASK) { 45 case (AMD_ID_PL160CB & FLASH_TYPEMASK): 46 printf ("AM29PL160CB (16Mbit)\n"); 47 break; 48 default: 49 printf ("Unknown Chip Type\n"); 50 goto Done; 51 break; 52 } 53 54 printf (" Size: %ld MB in %d Sectors\n", 55 info->size >> 20, info->sector_count); 56 57 printf (" Sector Start Addresses:"); 58 for (i = 0; i < info->sector_count; i++) { 59 if ((i % 5) == 0) { 60 printf ("\n "); 61 } 62 printf (" %08lX%s", info->start[i], 63 info->protect[i] ? " (RO)" : " "); 64 } 65 printf ("\n"); 66 67 Done: 68 return; 69 } 70 71 72 unsigned long flash_init (void) 73 { 74 int i, j; 75 ulong size = 0; 76 77 for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { 78 ulong flashbase = 0; 79 80 flash_info[i].flash_id = 81 (AMD_MANUFACT & FLASH_VENDMASK) | 82 (AMD_ID_PL160CB & FLASH_TYPEMASK); 83 flash_info[i].size = FLASH_BANK_SIZE; 84 flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; 85 memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); 86 if (i == 0) 87 flashbase = PHYS_FLASH_1; 88 else 89 panic ("configured to many flash banks!\n"); 90 91 for (j = 0; j < flash_info[i].sector_count; j++) { 92 if (j == 0) { 93 /* 1st is 16 KiB */ 94 flash_info[i].start[j] = flashbase; 95 } 96 if ((j >= 1) && (j <= 2)) { 97 /* 2nd and 3rd are 8 KiB */ 98 flash_info[i].start[j] = 99 flashbase + 0x4000 + 0x2000 * (j - 1); 100 } 101 if (j == 3) { 102 /* 4th is 224 KiB */ 103 flash_info[i].start[j] = flashbase + 0x8000; 104 } 105 if ((j >= 4) && (j <= 10)) { 106 /* rest is 256 KiB */ 107 flash_info[i].start[j] = 108 flashbase + 0x40000 + 0x40000 * (j - 109 4); 110 } 111 } 112 size += flash_info[i].size; 113 } 114 115 flash_protect (FLAG_PROTECT_SET, 116 CONFIG_SYS_FLASH_BASE, 117 CONFIG_SYS_FLASH_BASE + 0x3ffff, &flash_info[0]); 118 119 return size; 120 } 121 122 123 #define CMD_READ_ARRAY 0x00F0 124 #define CMD_UNLOCK1 0x00AA 125 #define CMD_UNLOCK2 0x0055 126 #define CMD_ERASE_SETUP 0x0080 127 #define CMD_ERASE_CONFIRM 0x0030 128 #define CMD_PROGRAM 0x00A0 129 #define CMD_UNLOCK_BYPASS 0x0020 130 131 #define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555<<1))) 132 #define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA<<1))) 133 134 #define BIT_ERASE_DONE 0x0080 135 #define BIT_RDY_MASK 0x0080 136 #define BIT_PROGRAM_ERROR 0x0020 137 #define BIT_TIMEOUT 0x80000000 /* our flag */ 138 139 #define READY 1 140 #define ERR 2 141 #define TMO 4 142 143 144 int flash_erase (flash_info_t * info, int s_first, int s_last) 145 { 146 ulong result; 147 int iflag, cflag, prot, sect; 148 int rc = ERR_OK; 149 int chip1; 150 151 /* first look for protection bits */ 152 153 if (info->flash_id == FLASH_UNKNOWN) 154 return ERR_UNKNOWN_FLASH_TYPE; 155 156 if ((s_first < 0) || (s_first > s_last)) { 157 return ERR_INVAL; 158 } 159 160 if ((info->flash_id & FLASH_VENDMASK) != 161 (AMD_MANUFACT & FLASH_VENDMASK)) { 162 return ERR_UNKNOWN_FLASH_VENDOR; 163 } 164 165 prot = 0; 166 for (sect = s_first; sect <= s_last; ++sect) { 167 if (info->protect[sect]) { 168 prot++; 169 } 170 } 171 if (prot) 172 return ERR_PROTECTED; 173 174 /* 175 * Disable interrupts which might cause a timeout 176 * here. Remember that our exception vectors are 177 * at address 0 in the flash, and we don't want a 178 * (ticker) exception to happen while the flash 179 * chip is in programming mode. 180 */ 181 182 cflag = icache_status (); 183 icache_disable (); 184 iflag = disable_interrupts (); 185 186 printf ("\n"); 187 188 /* Start erase on unprotected sectors */ 189 for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { 190 printf ("Erasing sector %2d ... ", sect); 191 192 /* arm simple, non interrupt dependent timer */ 193 set_timer (0); 194 195 if (info->protect[sect] == 0) { /* not protected */ 196 volatile u16 *addr = 197 (volatile u16 *) (info->start[sect]); 198 199 MEM_FLASH_ADDR1 = CMD_UNLOCK1; 200 MEM_FLASH_ADDR2 = CMD_UNLOCK2; 201 MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; 202 203 MEM_FLASH_ADDR1 = CMD_UNLOCK1; 204 MEM_FLASH_ADDR2 = CMD_UNLOCK2; 205 *addr = CMD_ERASE_CONFIRM; 206 207 /* wait until flash is ready */ 208 chip1 = 0; 209 210 do { 211 result = *addr; 212 213 /* check timeout */ 214 if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) { 215 MEM_FLASH_ADDR1 = CMD_READ_ARRAY; 216 chip1 = TMO; 217 break; 218 } 219 220 if (!chip1 221 && (result & 0xFFFF) & BIT_ERASE_DONE) 222 chip1 = READY; 223 224 } while (!chip1); 225 226 MEM_FLASH_ADDR1 = CMD_READ_ARRAY; 227 228 if (chip1 == ERR) { 229 rc = ERR_PROG_ERROR; 230 goto outahere; 231 } 232 if (chip1 == TMO) { 233 rc = ERR_TIMOUT; 234 goto outahere; 235 } 236 237 printf ("ok.\n"); 238 } else { /* it was protected */ 239 240 printf ("protected!\n"); 241 } 242 } 243 244 if (ctrlc ()) 245 printf ("User Interrupt!\n"); 246 247 outahere: 248 /* allow flash to settle - wait 10 ms */ 249 udelay (10000); 250 251 if (iflag) 252 enable_interrupts (); 253 254 if (cflag) 255 icache_enable (); 256 257 return rc; 258 } 259 260 static int write_word (flash_info_t * info, ulong dest, ulong data) 261 { 262 volatile u16 *addr = (volatile u16 *) dest; 263 ulong result; 264 int rc = ERR_OK; 265 int cflag, iflag; 266 int chip1; 267 268 /* 269 * Check if Flash is (sufficiently) erased 270 */ 271 result = *addr; 272 if ((result & data) != data) 273 return ERR_NOT_ERASED; 274 275 276 /* 277 * Disable interrupts which might cause a timeout 278 * here. Remember that our exception vectors are 279 * at address 0 in the flash, and we don't want a 280 * (ticker) exception to happen while the flash 281 * chip is in programming mode. 282 */ 283 284 cflag = icache_status (); 285 icache_disable (); 286 iflag = disable_interrupts (); 287 288 MEM_FLASH_ADDR1 = CMD_UNLOCK1; 289 MEM_FLASH_ADDR2 = CMD_UNLOCK2; 290 MEM_FLASH_ADDR1 = CMD_PROGRAM; 291 *addr = data; 292 293 /* arm simple, non interrupt dependent timer */ 294 set_timer (0); 295 296 /* wait until flash is ready */ 297 chip1 = 0; 298 do { 299 result = *addr; 300 301 /* check timeout */ 302 if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) { 303 chip1 = ERR | TMO; 304 break; 305 } 306 if (!chip1 && ((result & 0x80) == (data & 0x80))) 307 chip1 = READY; 308 309 } while (!chip1); 310 311 *addr = CMD_READ_ARRAY; 312 313 if (chip1 == ERR || *addr != data) 314 rc = ERR_PROG_ERROR; 315 316 if (iflag) 317 enable_interrupts (); 318 319 if (cflag) 320 icache_enable (); 321 322 return rc; 323 } 324 325 326 int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) 327 { 328 ulong wp, data; 329 int rc; 330 331 if (addr & 1) { 332 printf ("unaligned destination not supported\n"); 333 return ERR_ALIGN; 334 } 335 336 #if 0 337 if (cnt & 1) { 338 printf ("odd transfer sizes not supported\n"); 339 return ERR_ALIGN; 340 } 341 #endif 342 343 wp = addr; 344 345 if (addr & 1) { 346 data = (*((volatile u8 *) addr) << 8) | *((volatile u8 *) 347 src); 348 if ((rc = write_word (info, wp - 1, data)) != 0) { 349 return (rc); 350 } 351 src += 1; 352 wp += 1; 353 cnt -= 1; 354 } 355 356 while (cnt >= 2) { 357 data = *((volatile u16 *) src); 358 if ((rc = write_word (info, wp, data)) != 0) { 359 return (rc); 360 } 361 src += 2; 362 wp += 2; 363 cnt -= 2; 364 } 365 366 if (cnt == 1) { 367 data = (*((volatile u8 *) src) << 8) | 368 *((volatile u8 *) (wp + 1)); 369 if ((rc = write_word (info, wp, data)) != 0) { 370 return (rc); 371 } 372 src += 1; 373 wp += 1; 374 cnt -= 1; 375 } 376 377 return ERR_OK; 378 } 379