1 /* 2 * Board initialization for EP93xx 3 * 4 * Copyright (C) 2013 5 * Sergey Kostanbaev <sergey.kostanbaev <at> fairwaves.ru> 6 * 7 * Copyright (C) 2009 8 * Matthias Kaehlcke <matthias <at> kaehlcke.net> 9 * 10 * (C) Copyright 2002 2003 11 * Network Audio Technologies, Inc. <www.netaudiotech.com> 12 * Adam Bezanson <bezanson <at> netaudiotech.com> 13 * 14 * SPDX-License-Identifier: GPL-2.0+ 15 */ 16 17 #include <config.h> 18 #include <common.h> 19 #include <netdev.h> 20 #include <asm/io.h> 21 #include <asm/arch/ep93xx.h> 22 23 DECLARE_GLOBAL_DATA_PTR; 24 25 /* 26 * usb_div: 4, nbyp2: 1, pll2_en: 1 27 * pll2_x1: 368640000.000000, pll2_x2ip: 15360000.000000, 28 * pll2_x2: 384000000.000000, pll2_out: 192000000.000000 29 */ 30 #define CLKSET2_VAL (23 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \ 31 24 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \ 32 24 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \ 33 1 << SYSCON_CLKSET_PLL_PS_SHIFT | \ 34 SYSCON_CLKSET2_PLL2_EN | \ 35 SYSCON_CLKSET2_NBYP2 | \ 36 3 << SYSCON_CLKSET2_USB_DIV_SHIFT) 37 38 #define SMC_BCR6_VALUE (2 << SMC_BCR_IDCY_SHIFT | 5 << SMC_BCR_WST1_SHIFT | \ 39 SMC_BCR_BLE | 2 << SMC_BCR_WST2_SHIFT | \ 40 1 << SMC_BCR_MW_SHIFT) 41 42 /* delay execution before timers are initialized */ 43 static inline void early_udelay(uint32_t usecs) 44 { 45 /* loop takes 4 cycles at 5.0ns (fastest case, running at 200MHz) */ 46 register uint32_t loops = (usecs * 1000) / 20; 47 48 __asm__ volatile ("1:\n" 49 "subs %0, %1, #1\n" 50 "bne 1b" : "=r" (loops) : "0" (loops)); 51 } 52 53 #ifndef CONFIG_EP93XX_NO_FLASH_CFG 54 static void flash_cfg(void) 55 { 56 struct smc_regs *smc = (struct smc_regs *)SMC_BASE; 57 58 writel(SMC_BCR6_VALUE, &smc->bcr6); 59 } 60 #else 61 #define flash_cfg() 62 #endif 63 64 int board_init(void) 65 { 66 /* 67 * Setup PLL2, PPL1 has been set during lowlevel init 68 */ 69 struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE; 70 writel(CLKSET2_VAL, &syscon->clkset2); 71 72 /* 73 * the user's guide recommends to wait at least 1 ms for PLL2 to 74 * stabilize 75 */ 76 early_udelay(1000); 77 78 /* Go to Async mode */ 79 __asm__ volatile ("mrc p15, 0, r0, c1, c0, 0"); 80 __asm__ volatile ("orr r0, r0, #0xc0000000"); 81 __asm__ volatile ("mcr p15, 0, r0, c1, c0, 0"); 82 83 icache_enable(); 84 85 #ifdef USE_920T_MMU 86 dcache_enable(); 87 #endif 88 89 /* Machine number, as defined in linux/arch/arm/tools/mach-types */ 90 gd->bd->bi_arch_number = CONFIG_MACH_TYPE; 91 92 /* adress of boot parameters */ 93 gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; 94 95 /* We have a console */ 96 gd->have_console = 1; 97 98 enable_interrupts(); 99 100 flash_cfg(); 101 102 green_led_on(); 103 red_led_off(); 104 105 return 0; 106 } 107 108 int board_early_init_f(void) 109 { 110 /* 111 * set UARTBAUD bit to drive UARTs with 14.7456MHz instead of 112 * 14.7456/2 MHz 113 */ 114 struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE; 115 writel(SYSCON_PWRCNT_UART_BAUD, &syscon->pwrcnt); 116 return 0; 117 } 118 119 int board_eth_init(bd_t *bd) 120 { 121 return ep93xx_eth_initialize(0, MAC_BASE); 122 } 123 124 static void dram_fill_bank_addr(unsigned dram_addr_mask, unsigned dram_bank_cnt, 125 unsigned dram_bank_base[CONFIG_NR_DRAM_BANKS]) 126 { 127 if (dram_bank_cnt == 1) { 128 dram_bank_base[0] = PHYS_SDRAM_1; 129 } else { 130 /* Table lookup for holes in address space. Maximum memory 131 * for the single SDCS may be up to 256Mb. We start scanning 132 * banks from 1Mb, so it could be up to 128 banks theoretically. 133 * We need at maximum 7 bits for the loockup, 8 slots is 134 * enough for the worst case. 135 */ 136 unsigned tbl[8]; 137 unsigned i = dram_bank_cnt / 2; 138 unsigned j = 0x00100000; /* 1 Mb */ 139 unsigned *ptbl = tbl; 140 do { 141 while (!(dram_addr_mask & j)) { 142 j <<= 1; 143 } 144 *ptbl++ = j; 145 j <<= 1; 146 i >>= 1; 147 } while (i != 0); 148 149 for (i = dram_bank_cnt, j = 0; 150 (i != 0) && (j < CONFIG_NR_DRAM_BANKS); --i, ++j) { 151 unsigned addr = PHYS_SDRAM_1; 152 unsigned k; 153 unsigned bit; 154 155 for (k = 0, bit = 1; k < 8; k++, bit <<= 1) { 156 if (bit & j) 157 addr |= tbl[k]; 158 } 159 160 dram_bank_base[j] = addr; 161 } 162 } 163 } 164 165 /* called in board_init_f (before relocation) */ 166 static unsigned dram_init_banksize_int(int print) 167 { 168 /* 169 * Collect information of banks that has been filled during lowlevel 170 * initialization 171 */ 172 unsigned i; 173 unsigned dram_bank_base[CONFIG_NR_DRAM_BANKS]; 174 unsigned dram_total = 0; 175 unsigned dram_bank_size = *(unsigned *) 176 (PHYS_SDRAM_1 | UBOOT_MEMORYCNF_BANK_SIZE); 177 unsigned dram_addr_mask = *(unsigned *) 178 (PHYS_SDRAM_1 | UBOOT_MEMORYCNF_BANK_MASK); 179 unsigned dram_bank_cnt = *(unsigned *) 180 (PHYS_SDRAM_1 | UBOOT_MEMORYCNF_BANK_COUNT); 181 182 dram_fill_bank_addr(dram_addr_mask, dram_bank_cnt, dram_bank_base); 183 184 for (i = 0; i < dram_bank_cnt; i++) { 185 gd->bd->bi_dram[i].start = dram_bank_base[i]; 186 gd->bd->bi_dram[i].size = dram_bank_size; 187 dram_total += dram_bank_size; 188 } 189 for (; i < CONFIG_NR_DRAM_BANKS; i++) { 190 gd->bd->bi_dram[i].start = 0; 191 gd->bd->bi_dram[i].size = 0; 192 } 193 194 if (print) { 195 printf("DRAM mask: %08x\n", dram_addr_mask); 196 printf("DRAM total %u banks:\n", dram_bank_cnt); 197 printf("bank base-address size\n"); 198 199 if (dram_bank_cnt > CONFIG_NR_DRAM_BANKS) { 200 printf("WARNING! UBoot was configured for %u banks,\n" 201 "but %u has been found. " 202 "Supressing extra memory banks\n", 203 CONFIG_NR_DRAM_BANKS, dram_bank_cnt); 204 dram_bank_cnt = CONFIG_NR_DRAM_BANKS; 205 } 206 207 for (i = 0; i < dram_bank_cnt; i++) { 208 printf(" %u %08x %08x\n", 209 i, dram_bank_base[i], dram_bank_size); 210 } 211 printf(" ------------------------------------------\n" 212 "Total %9d\n\n", 213 dram_total); 214 } 215 216 return dram_total; 217 } 218 219 void dram_init_banksize(void) 220 { 221 dram_init_banksize_int(0); 222 } 223 224 /* called in board_init_f (before relocation) */ 225 int dram_init(void) 226 { 227 struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE; 228 unsigned sec_id = readl(SECURITY_EXTENSIONID); 229 unsigned chip_id = readl(&syscon->chipid); 230 231 printf("CPU: Cirrus Logic "); 232 switch (sec_id & 0x000001FE) { 233 case 0x00000008: 234 printf("EP9301"); 235 break; 236 case 0x00000004: 237 printf("EP9307"); 238 break; 239 case 0x00000002: 240 printf("EP931x"); 241 break; 242 case 0x00000000: 243 printf("EP9315"); 244 break; 245 default: 246 printf("<unknown>"); 247 break; 248 } 249 250 printf(" - Rev. "); 251 switch (chip_id & 0xF0000000) { 252 case 0x00000000: 253 printf("A"); 254 break; 255 case 0x10000000: 256 printf("B"); 257 break; 258 case 0x20000000: 259 printf("C"); 260 break; 261 case 0x30000000: 262 printf("D0"); 263 break; 264 case 0x40000000: 265 printf("D1"); 266 break; 267 case 0x50000000: 268 printf("E0"); 269 break; 270 case 0x60000000: 271 printf("E1"); 272 break; 273 case 0x70000000: 274 printf("E2"); 275 break; 276 default: 277 printf("?"); 278 break; 279 } 280 printf(" (SecExtID=%.8x/ChipID=%.8x)\n", sec_id, chip_id); 281 282 gd->ram_size = dram_init_banksize_int(1); 283 return 0; 284 } 285