1 /* 2 * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <asm/arch/clock.h> 8 #include <asm/arch/iomux.h> 9 #include <asm/arch/imx-regs.h> 10 #include <asm/arch/crm_regs.h> 11 #include <asm/arch/mx6ul_pins.h> 12 #include <asm/arch/mx6-pins.h> 13 #include <asm/arch/sys_proto.h> 14 #include <asm/gpio.h> 15 #include <asm/mach-imx/iomux-v3.h> 16 #include <asm/mach-imx/boot_mode.h> 17 #include <asm/mach-imx/mxc_i2c.h> 18 #include <asm/io.h> 19 #include <common.h> 20 #include <fsl_esdhc.h> 21 #include <i2c.h> 22 #include <miiphy.h> 23 #include <mmc.h> 24 #include <netdev.h> 25 #include <usb.h> 26 #include <usb/ehci-ci.h> 27 28 DECLARE_GLOBAL_DATA_PTR; 29 30 #define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ 31 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ 32 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) 33 34 #define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ 35 PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \ 36 PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) 37 38 #define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ 39 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ 40 PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ 41 PAD_CTL_ODE) 42 43 #define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ 44 PAD_CTL_SPEED_HIGH | \ 45 PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST) 46 47 #define MDIO_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ 48 PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST | PAD_CTL_ODE) 49 50 #define ENET_CLK_PAD_CTRL (PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) 51 52 #define ENET_RX_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ 53 PAD_CTL_SPEED_HIGH | PAD_CTL_SRE_FAST) 54 55 #define OTGID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ 56 PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ 57 PAD_CTL_DSE_80ohm | PAD_CTL_HYS | \ 58 PAD_CTL_SRE_FAST) 59 60 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) 61 62 static struct i2c_pads_info i2c_pad_info1 = { 63 .scl = { 64 .i2c_mode = MX6_PAD_GPIO1_IO02__I2C1_SCL | PC, 65 .gpio_mode = MX6_PAD_GPIO1_IO02__GPIO1_IO02 | PC, 66 .gp = IMX_GPIO_NR(1, 2), 67 }, 68 .sda = { 69 .i2c_mode = MX6_PAD_GPIO1_IO03__I2C1_SDA | PC, 70 .gpio_mode = MX6_PAD_GPIO1_IO03__GPIO1_IO03 | PC, 71 .gp = IMX_GPIO_NR(1, 3), 72 }, 73 }; 74 75 static struct i2c_pads_info i2c_pad_info2 = { 76 .scl = { 77 .i2c_mode = MX6_PAD_GPIO1_IO00__I2C2_SCL | PC, 78 .gpio_mode = MX6_PAD_GPIO1_IO00__GPIO1_IO00 | PC, 79 .gp = IMX_GPIO_NR(1, 0), 80 }, 81 .sda = { 82 .i2c_mode = MX6_PAD_GPIO1_IO01__I2C2_SDA | PC, 83 .gpio_mode = MX6_PAD_GPIO1_IO01__GPIO1_IO01 | PC, 84 .gp = IMX_GPIO_NR(1, 1), 85 }, 86 }; 87 88 static struct i2c_pads_info i2c_pad_info4 = { 89 .scl = { 90 .i2c_mode = MX6_PAD_UART2_TX_DATA__I2C4_SCL | PC, 91 .gpio_mode = MX6_PAD_UART2_TX_DATA__GPIO1_IO20 | PC, 92 .gp = IMX_GPIO_NR(1, 20), 93 }, 94 .sda = { 95 .i2c_mode = MX6_PAD_UART2_RX_DATA__I2C4_SDA | PC, 96 .gpio_mode = MX6_PAD_UART2_RX_DATA__GPIO1_IO21 | PC, 97 .gp = IMX_GPIO_NR(1, 21), 98 }, 99 }; 100 101 int dram_init(void) 102 { 103 gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); 104 105 return 0; 106 } 107 108 static iomux_v3_cfg_t const uart1_pads[] = { 109 MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), 110 MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), 111 MX6_PAD_UART1_CTS_B__UART1_DCE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL), 112 MX6_PAD_UART1_RTS_B__UART1_DCE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL), 113 }; 114 115 static iomux_v3_cfg_t const uart4_pads[] = { 116 MX6_PAD_UART4_TX_DATA__UART4_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), 117 MX6_PAD_UART4_RX_DATA__UART4_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), 118 }; 119 120 static iomux_v3_cfg_t const uart5_pads[] = { 121 MX6_PAD_GPIO1_IO04__UART5_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), 122 MX6_PAD_GPIO1_IO05__UART5_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), 123 MX6_PAD_GPIO1_IO09__UART5_DCE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL), 124 MX6_PAD_GPIO1_IO08__UART5_DCE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL), 125 }; 126 127 static iomux_v3_cfg_t const uart7_pads[] = { 128 MX6_PAD_ENET2_RX_EN__UART7_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), 129 MX6_PAD_ENET2_TX_DATA0__UART7_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), 130 }; 131 132 static iomux_v3_cfg_t const uart8_pads[] = { 133 MX6_PAD_LCD_DATA20__UART8_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), 134 MX6_PAD_LCD_DATA21__UART8_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), 135 }; 136 137 static void setup_iomux_uart(void) 138 { 139 imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); 140 imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads)); 141 imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads)); 142 imx_iomux_v3_setup_multiple_pads(uart7_pads, ARRAY_SIZE(uart7_pads)); 143 imx_iomux_v3_setup_multiple_pads(uart8_pads, ARRAY_SIZE(uart8_pads)); 144 } 145 146 /* eMMC on USDHC2 */ 147 static iomux_v3_cfg_t const usdhc2_pads[] = { 148 MX6_PAD_NAND_RE_B__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 149 MX6_PAD_NAND_WE_B__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 150 MX6_PAD_NAND_DATA00__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 151 MX6_PAD_NAND_DATA01__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 152 MX6_PAD_NAND_DATA02__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 153 MX6_PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 154 MX6_PAD_NAND_DATA04__USDHC2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 155 MX6_PAD_NAND_DATA05__USDHC2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 156 MX6_PAD_NAND_DATA06__USDHC2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 157 MX6_PAD_NAND_DATA07__USDHC2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 158 159 /* 160 * RST_B 161 */ 162 MX6_PAD_NAND_ALE__USDHC2_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL), 163 }; 164 165 static struct fsl_esdhc_cfg usdhc_cfg = { 166 .esdhc_base = USDHC2_BASE_ADDR, 167 .max_bus_width = 8, 168 }; 169 170 #define USDHC2_PWR_GPIO IMX_GPIO_NR(1, 9) 171 172 int board_mmc_getcd(struct mmc *mmc) 173 { 174 /* eMMC is always present */ 175 return 1; 176 } 177 178 int board_mmc_init(bd_t *bis) 179 { 180 imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); 181 182 usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); 183 184 return fsl_esdhc_initialize(bis, &usdhc_cfg); 185 } 186 187 #define USB_OTHERREGS_OFFSET 0x800 188 #define UCTRL_PWR_POL (1 << 9) 189 190 static iomux_v3_cfg_t const usb_otg_pads[] = { 191 /* OTG1 */ 192 MX6_PAD_SD1_CMD__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), 193 MX6_PAD_SD1_DATA0__ANATOP_OTG1_ID | MUX_PAD_CTRL(OTGID_PAD_CTRL), 194 /* OTG2 */ 195 MX6_PAD_SD1_DATA1__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), 196 MX6_PAD_SD1_DATA3__ANATOP_OTG2_ID | MUX_PAD_CTRL(OTGID_PAD_CTRL), 197 }; 198 199 static void setup_usb(void) 200 { 201 imx_iomux_v3_setup_multiple_pads(usb_otg_pads, 202 ARRAY_SIZE(usb_otg_pads)); 203 } 204 205 int board_usb_phy_mode(int port) 206 { 207 if (port == 1) 208 return USB_INIT_HOST; 209 else 210 return usb_phy_mode(port); 211 } 212 213 int board_ehci_hcd_init(int port) 214 { 215 u32 *usbnc_usb_ctrl; 216 217 if (port > 1) 218 return -EINVAL; 219 220 usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET + 221 port * 4); 222 223 /* Set Power polarity */ 224 setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL); 225 226 return 0; 227 } 228 229 static iomux_v3_cfg_t const fec1_pads[] = { 230 MX6_PAD_GPIO1_IO06__ENET1_MDIO | MUX_PAD_CTRL(MDIO_PAD_CTRL), 231 MX6_PAD_GPIO1_IO07__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), 232 MX6_PAD_ENET1_TX_DATA0__ENET1_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL), 233 MX6_PAD_ENET1_TX_DATA1__ENET1_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL), 234 MX6_PAD_ENET1_TX_EN__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), 235 MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL), 236 MX6_PAD_ENET1_RX_DATA0__ENET1_RDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL), 237 MX6_PAD_ENET1_RX_DATA1__ENET1_RDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL), 238 MX6_PAD_ENET1_RX_ER__ENET1_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL), 239 MX6_PAD_ENET1_RX_EN__ENET1_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), 240 241 /* ENET1 reset */ 242 MX6_PAD_CSI_MCLK__GPIO4_IO17 | MUX_PAD_CTRL(NO_PAD_CTRL), 243 /* ENET1 interrupt */ 244 MX6_PAD_CSI_PIXCLK__GPIO4_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL), 245 }; 246 247 #define ENET_PHY_RESET_GPIO IMX_GPIO_NR(4, 17) 248 249 int board_eth_init(bd_t *bis) 250 { 251 int ret; 252 253 imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); 254 255 /* Reset LAN8742 PHY */ 256 ret = gpio_request(ENET_PHY_RESET_GPIO, "phy-reset"); 257 if (!ret) 258 gpio_direction_output(ENET_PHY_RESET_GPIO , 0); 259 mdelay(10); 260 gpio_set_value(ENET_PHY_RESET_GPIO, 1); 261 mdelay(10); 262 263 return cpu_eth_init(bis); 264 } 265 266 static int setup_fec(int fec_id) 267 { 268 struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; 269 int ret; 270 271 /* 272 * Use 50M anatop loopback REF_CLK1 for ENET1, 273 * clear gpr1[13], set gpr1[17]. 274 */ 275 clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK, 276 IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK); 277 278 ret = enable_fec_anatop_clock(fec_id, ENET_50MHZ); 279 if (ret) 280 return ret; 281 282 enable_enet_clk(1); 283 284 return 0; 285 } 286 287 int board_phy_config(struct phy_device *phydev) 288 { 289 if (phydev->drv->config) 290 phydev->drv->config(phydev); 291 292 return 0; 293 } 294 295 int board_early_init_f(void) 296 { 297 setup_iomux_uart(); 298 299 return 0; 300 } 301 302 int board_init(void) 303 { 304 /* Address of boot parameters */ 305 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 306 307 setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); 308 setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); 309 setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info4); 310 311 setup_fec(CONFIG_FEC_ENET_DEV); 312 313 setup_usb(); 314 315 return 0; 316 } 317 318 static const struct boot_mode board_boot_modes[] = { 319 /* 8 bit bus width */ 320 {"emmc", MAKE_CFGVAL(0x60, 0x28, 0x00, 0x00)}, 321 { NULL, 0 }, 322 }; 323 324 int board_late_init(void) 325 { 326 add_board_boot_modes(board_boot_modes); 327 env_set("board_name", "xpress"); 328 329 return 0; 330 } 331 332 int checkboard(void) 333 { 334 puts("Board: CCV-EVA xPress\n"); 335 336 return 0; 337 } 338