1 /* 2 * SPL specific code for CCV xPress 3 * 4 * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #include <spl.h> 11 #include <asm/io.h> 12 #include <asm/arch/mx6-ddr.h> 13 #include <asm/arch/crm_regs.h> 14 15 /* Configuration for IM IME1G16D3EEBG-15EI, 64M x 16 -> 128MiB */ 16 17 static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = { 18 .grp_addds = 0x00000030, 19 .grp_ddrmode_ctl = 0x00020000, 20 .grp_b0ds = 0x00000030, 21 .grp_ctlds = 0x00000030, 22 .grp_b1ds = 0x00000030, 23 .grp_ddrpke = 0x00000000, 24 .grp_ddrmode = 0x00020000, 25 .grp_ddr_type = 0x000c0000, 26 }; 27 28 static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = { 29 .dram_dqm0 = 0x00000030, 30 .dram_dqm1 = 0x00000030, 31 .dram_ras = 0x00000030, 32 .dram_cas = 0x00000030, 33 .dram_odt0 = 0x00000030, 34 .dram_odt1 = 0x00000030, 35 .dram_sdba2 = 0x00000000, 36 .dram_sdclk_0 = 0x00000008, 37 .dram_sdqs0 = 0x00000038, 38 .dram_sdqs1 = 0x00000030, 39 .dram_reset = 0x00000030, 40 }; 41 42 static struct mx6_mmdc_calibration mx6_mmcd_calib = { 43 .p0_mpwldectrl0 = 0x00000000, 44 .p0_mpdgctrl0 = 0x4164015C, 45 .p0_mprddlctl = 0x40404446, 46 .p0_mpwrdlctl = 0x40405A52, 47 }; 48 49 struct mx6_ddr_sysinfo ddr_sysinfo = { 50 .dsize = 0, 51 .cs_density = 20, 52 .ncs = 1, 53 .cs1_mirror = 0, 54 .rtt_wr = 2, 55 .rtt_nom = 1, /* RTT_Nom = RZQ/2 */ 56 .walat = 1, /* Write additional latency */ 57 .ralat = 5, /* Read additional latency */ 58 .mif3_mode = 3, /* Command prediction working mode */ 59 .bi_on = 1, /* Bank interleaving enabled */ 60 .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ 61 .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ 62 .ddr_type = DDR_TYPE_DDR3, 63 }; 64 65 static struct mx6_ddr3_cfg mem_ddr = { 66 .mem_speed = 800, 67 .density = 4, 68 .width = 16, 69 .banks = 8, 70 .rowaddr = 13, 71 .coladdr = 10, 72 .pagesz = 2, 73 .trcd = 1375, 74 .trcmin = 4875, 75 .trasmin = 3500, 76 }; 77 78 static void ccgr_init(void) 79 { 80 struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; 81 82 writel(0xFFFFFFFF, &ccm->CCGR0); 83 writel(0xFFFFFFFF, &ccm->CCGR1); 84 writel(0xFFFFFFFF, &ccm->CCGR2); 85 writel(0xFFFFFFFF, &ccm->CCGR3); 86 writel(0xFFFFFFFF, &ccm->CCGR4); 87 writel(0xFFFFFFFF, &ccm->CCGR5); 88 writel(0xFFFFFFFF, &ccm->CCGR6); 89 writel(0xFFFFFFFF, &ccm->CCGR7); 90 } 91 92 static void spl_dram_init(void) 93 { 94 mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs); 95 mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr); 96 } 97 98 void board_init_f(ulong dummy) 99 { 100 /* Setup AIPS and disable watchdog */ 101 arch_cpu_init(); 102 103 ccgr_init(); 104 105 /* Setup iomux and i2c */ 106 board_early_init_f(); 107 108 /* Setup GP timer */ 109 timer_init(); 110 111 /* UART clocks enabled and gd valid - init serial console */ 112 preloader_console_init(); 113 114 /* DDR initialization */ 115 spl_dram_init(); 116 } 117