xref: /openbmc/u-boot/board/ccv/xpress/spl.c (revision e3963c09)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * SPL specific code for CCV xPress
4  *
5  * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
6  */
7 
8 #include <common.h>
9 #include <spl.h>
10 #include <asm/io.h>
11 #include <asm/arch/mx6-ddr.h>
12 #include <asm/arch/crm_regs.h>
13 
14 /* Configuration for IM IME1G16D3EEBG-15EI, 64M x 16 -> 128MiB */
15 
16 static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
17 	.grp_addds = 0x00000030,
18 	.grp_ddrmode_ctl = 0x00020000,
19 	.grp_b0ds = 0x00000030,
20 	.grp_ctlds = 0x00000030,
21 	.grp_b1ds = 0x00000030,
22 	.grp_ddrpke = 0x00000000,
23 	.grp_ddrmode = 0x00020000,
24 	.grp_ddr_type = 0x000c0000,
25 };
26 
27 static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
28 	.dram_dqm0 = 0x00000030,
29 	.dram_dqm1 = 0x00000030,
30 	.dram_ras = 0x00000030,
31 	.dram_cas = 0x00000030,
32 	.dram_odt0 = 0x00000030,
33 	.dram_odt1 = 0x00000030,
34 	.dram_sdba2 = 0x00000000,
35 	.dram_sdclk_0 = 0x00000008,
36 	.dram_sdqs0 = 0x00000038,
37 	.dram_sdqs1 = 0x00000030,
38 	.dram_reset = 0x00000030,
39 };
40 
41 static struct mx6_mmdc_calibration mx6_mmcd_calib = {
42 	.p0_mpwldectrl0 = 0x00000000,
43 	.p0_mpdgctrl0 = 0x4164015C,
44 	.p0_mprddlctl = 0x40404446,
45 	.p0_mpwrdlctl = 0x40405A52,
46 };
47 
48 struct mx6_ddr_sysinfo ddr_sysinfo = {
49 	.dsize = 0,
50 	.cs_density = 20,
51 	.ncs = 1,
52 	.cs1_mirror = 0,
53 	.rtt_wr = 2,
54 	.rtt_nom = 1,		/* RTT_Nom = RZQ/2 */
55 	.walat = 1,		/* Write additional latency */
56 	.ralat = 5,		/* Read additional latency */
57 	.mif3_mode = 3,		/* Command prediction working mode */
58 	.bi_on = 1,		/* Bank interleaving enabled */
59 	.sde_to_rst = 0x10,	/* 14 cycles, 200us (JEDEC default) */
60 	.rst_to_cke = 0x23,	/* 33 cycles, 500us (JEDEC default) */
61 	.ddr_type = DDR_TYPE_DDR3,
62 	.refsel = 1,		/* Refresh cycles at 32KHz */
63 	.refr = 7,		/* 8 refresh commands per refresh cycle */
64 };
65 
66 static struct mx6_ddr3_cfg mem_ddr = {
67 	.mem_speed = 800,
68 	.density = 4,
69 	.width = 16,
70 	.banks = 8,
71 	.rowaddr = 13,
72 	.coladdr = 10,
73 	.pagesz = 2,
74 	.trcd = 1375,
75 	.trcmin = 4875,
76 	.trasmin = 3500,
77 };
78 
79 static void ccgr_init(void)
80 {
81 	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
82 
83 	writel(0xFFFFFFFF, &ccm->CCGR0);
84 	writel(0xFFFFFFFF, &ccm->CCGR1);
85 	writel(0xFFFFFFFF, &ccm->CCGR2);
86 	writel(0xFFFFFFFF, &ccm->CCGR3);
87 	writel(0xFFFFFFFF, &ccm->CCGR4);
88 	writel(0xFFFFFFFF, &ccm->CCGR5);
89 	writel(0xFFFFFFFF, &ccm->CCGR6);
90 	writel(0xFFFFFFFF, &ccm->CCGR7);
91 }
92 
93 static void spl_dram_init(void)
94 {
95 	mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
96 	mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
97 }
98 
99 void board_init_f(ulong dummy)
100 {
101 	/* Setup AIPS and disable watchdog */
102 	arch_cpu_init();
103 
104 	ccgr_init();
105 
106 	/* Setup iomux and i2c */
107 	board_early_init_f();
108 
109 	/* Setup GP timer */
110 	timer_init();
111 
112 	/* UART clocks enabled and gd valid - init serial console */
113 	preloader_console_init();
114 
115 	/* DDR initialization */
116 	spl_dram_init();
117 }
118