1 /*
2  * Copyright 2013 Broadcom Corporation.
3  *
4  * SPDX-License-Identifier:      GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <asm/io.h>
9 #include <asm/mach-types.h>
10 #include <mmc.h>
11 #include <asm/kona-common/kona_sdhci.h>
12 #include <asm/kona-common/clk.h>
13 #include <asm/arch/sysmap.h>
14 
15 #define SECWATCHDOG_SDOGCR_OFFSET	0x00000000
16 #define SECWATCHDOG_SDOGCR_EN_SHIFT	27
17 #define SECWATCHDOG_SDOGCR_SRSTEN_SHIFT	26
18 #define SECWATCHDOG_SDOGCR_CLKS_SHIFT	20
19 #define SECWATCHDOG_SDOGCR_LD_SHIFT	0
20 
21 DECLARE_GLOBAL_DATA_PTR;
22 
23 /*
24  * board_init - early hardware init
25  */
26 int board_init(void)
27 {
28 	printf("Relocation Offset is: %08lx\n", gd->reloc_off);
29 
30 	/* adress of boot parameters */
31 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
32 
33 	clk_init();
34 
35 	return 0;
36 }
37 
38 /*
39  * misc_init_r - miscellaneous platform dependent initializations
40  */
41 int misc_init_r(void)
42 {
43 	/* Disable watchdog reset - watchdog unused */
44 	writel((0 << SECWATCHDOG_SDOGCR_EN_SHIFT) |
45 	       (0 << SECWATCHDOG_SDOGCR_SRSTEN_SHIFT) |
46 	       (4 << SECWATCHDOG_SDOGCR_CLKS_SHIFT) |
47 	       (0x5a0 << SECWATCHDOG_SDOGCR_LD_SHIFT),
48 	       (SECWD_BASE_ADDR + SECWATCHDOG_SDOGCR_OFFSET));
49 
50 	return 0;
51 }
52 
53 /*
54  * dram_init - sets uboots idea of sdram size
55  */
56 int dram_init(void)
57 {
58 	gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
59 				    CONFIG_SYS_SDRAM_SIZE);
60 	return 0;
61 }
62 
63 /* This is called after dram_init() so use get_ram_size result */
64 void dram_init_banksize(void)
65 {
66 	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
67 	gd->bd->bi_dram[0].size = gd->ram_size;
68 }
69 
70 #ifdef CONFIG_KONA_SDHCI
71 /*
72  * mmc_init - Initializes mmc
73  */
74 int board_mmc_init(bd_t *bis)
75 {
76 	int ret = 0;
77 
78 	/* Register eMMC - SDIO2 */
79 	ret = kona_sdhci_init(1, 400000, 0);
80 	if (ret)
81 		return ret;
82 
83 	/* Register SD Card - SDIO4 kona_mmc_init assumes 0 based index */
84 	ret = kona_sdhci_init(3, 400000, 0);
85 	return ret;
86 }
87 #endif
88