1 /* 2 * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. 3 * Copyright (C) 2013, Boundary Devices <info@boundarydevices.com> 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 #include <common.h> 25 #include <asm/io.h> 26 #include <asm/arch/clock.h> 27 #include <asm/arch/imx-regs.h> 28 #include <asm/arch/iomux.h> 29 #include <asm/arch/sys_proto.h> 30 #include <malloc.h> 31 #include <asm/arch/mx6-pins.h> 32 #include <asm/errno.h> 33 #include <asm/gpio.h> 34 #include <asm/imx-common/iomux-v3.h> 35 #include <asm/imx-common/mxc_i2c.h> 36 #include <asm/imx-common/boot_mode.h> 37 #include <mmc.h> 38 #include <fsl_esdhc.h> 39 #include <micrel.h> 40 #include <miiphy.h> 41 #include <netdev.h> 42 #include <linux/fb.h> 43 #include <ipu_pixfmt.h> 44 #include <asm/arch/crm_regs.h> 45 #include <asm/arch/mxc_hdmi.h> 46 #include <i2c.h> 47 48 DECLARE_GLOBAL_DATA_PTR; 49 50 #define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ 51 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ 52 PAD_CTL_SRE_FAST | PAD_CTL_HYS) 53 54 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ 55 PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ 56 PAD_CTL_SRE_FAST | PAD_CTL_HYS) 57 58 #define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ 59 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 60 61 #define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \ 62 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) 63 64 #define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ 65 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 66 67 #define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ 68 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ 69 PAD_CTL_ODE | PAD_CTL_SRE_FAST) 70 71 #define WEAK_PULLUP (PAD_CTL_PUS_100K_UP | \ 72 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ 73 PAD_CTL_SRE_SLOW) 74 75 #define WEAK_PULLDOWN (PAD_CTL_PUS_100K_DOWN | \ 76 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ 77 PAD_CTL_HYS | PAD_CTL_SRE_SLOW) 78 79 #define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm) 80 81 int dram_init(void) 82 { 83 gd->ram_size = ((ulong)CONFIG_DDR_MB * 1024 * 1024); 84 85 return 0; 86 } 87 88 iomux_v3_cfg_t const uart1_pads[] = { 89 MX6_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), 90 MX6_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), 91 }; 92 93 iomux_v3_cfg_t const uart2_pads[] = { 94 MX6_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), 95 MX6_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), 96 }; 97 98 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) 99 100 /* I2C1, SGTL5000 */ 101 struct i2c_pads_info i2c_pad_info0 = { 102 .scl = { 103 .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC, 104 .gpio_mode = MX6_PAD_EIM_D21__GPIO_3_21 | PC, 105 .gp = IMX_GPIO_NR(3, 21) 106 }, 107 .sda = { 108 .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC, 109 .gpio_mode = MX6_PAD_EIM_D28__GPIO_3_28 | PC, 110 .gp = IMX_GPIO_NR(3, 28) 111 } 112 }; 113 114 /* I2C2 Camera, MIPI */ 115 struct i2c_pads_info i2c_pad_info1 = { 116 .scl = { 117 .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC, 118 .gpio_mode = MX6_PAD_KEY_COL3__GPIO_4_12 | PC, 119 .gp = IMX_GPIO_NR(4, 12) 120 }, 121 .sda = { 122 .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC, 123 .gpio_mode = MX6_PAD_KEY_ROW3__GPIO_4_13 | PC, 124 .gp = IMX_GPIO_NR(4, 13) 125 } 126 }; 127 128 /* I2C3, J15 - RGB connector */ 129 struct i2c_pads_info i2c_pad_info2 = { 130 .scl = { 131 .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | PC, 132 .gpio_mode = MX6_PAD_GPIO_5__GPIO_1_5 | PC, 133 .gp = IMX_GPIO_NR(1, 5) 134 }, 135 .sda = { 136 .i2c_mode = MX6_PAD_GPIO_16__I2C3_SDA | PC, 137 .gpio_mode = MX6_PAD_GPIO_16__GPIO_7_11 | PC, 138 .gp = IMX_GPIO_NR(7, 11) 139 } 140 }; 141 142 iomux_v3_cfg_t const usdhc3_pads[] = { 143 MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 144 MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 145 MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 146 MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 147 MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 148 MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 149 MX6_PAD_SD3_DAT5__GPIO_7_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ 150 }; 151 152 iomux_v3_cfg_t const usdhc4_pads[] = { 153 MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 154 MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 155 MX6_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 156 MX6_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 157 MX6_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 158 MX6_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 159 MX6_PAD_NANDF_D6__GPIO_2_6 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ 160 }; 161 162 iomux_v3_cfg_t const enet_pads1[] = { 163 MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), 164 MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), 165 MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), 166 MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), 167 MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), 168 MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), 169 MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), 170 MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), 171 MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), 172 /* pin 35 - 1 (PHY_AD2) on reset */ 173 MX6_PAD_RGMII_RXC__GPIO_6_30 | MUX_PAD_CTRL(NO_PAD_CTRL), 174 /* pin 32 - 1 - (MODE0) all */ 175 MX6_PAD_RGMII_RD0__GPIO_6_25 | MUX_PAD_CTRL(NO_PAD_CTRL), 176 /* pin 31 - 1 - (MODE1) all */ 177 MX6_PAD_RGMII_RD1__GPIO_6_27 | MUX_PAD_CTRL(NO_PAD_CTRL), 178 /* pin 28 - 1 - (MODE2) all */ 179 MX6_PAD_RGMII_RD2__GPIO_6_28 | MUX_PAD_CTRL(NO_PAD_CTRL), 180 /* pin 27 - 1 - (MODE3) all */ 181 MX6_PAD_RGMII_RD3__GPIO_6_29 | MUX_PAD_CTRL(NO_PAD_CTRL), 182 /* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */ 183 MX6_PAD_RGMII_RX_CTL__GPIO_6_24 | MUX_PAD_CTRL(NO_PAD_CTRL), 184 /* pin 42 PHY nRST */ 185 MX6_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL), 186 MX6_PAD_ENET_RXD0__GPIO_1_27 | MUX_PAD_CTRL(NO_PAD_CTRL), 187 }; 188 189 iomux_v3_cfg_t const enet_pads2[] = { 190 MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), 191 MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), 192 MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), 193 MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), 194 MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), 195 MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), 196 }; 197 198 /* wl1271 pads on nitrogen6x */ 199 iomux_v3_cfg_t const wl12xx_pads[] = { 200 (MX6_PAD_NANDF_CS1__GPIO_6_14 & ~MUX_PAD_CTRL_MASK) 201 | MUX_PAD_CTRL(WEAK_PULLDOWN), 202 (MX6_PAD_NANDF_CS2__GPIO_6_15 & ~MUX_PAD_CTRL_MASK) 203 | MUX_PAD_CTRL(OUTPUT_40OHM), 204 (MX6_PAD_NANDF_CS3__GPIO_6_16 & ~MUX_PAD_CTRL_MASK) 205 | MUX_PAD_CTRL(OUTPUT_40OHM), 206 }; 207 #define WL12XX_WL_IRQ_GP IMX_GPIO_NR(6, 14) 208 #define WL12XX_WL_ENABLE_GP IMX_GPIO_NR(6, 15) 209 #define WL12XX_BT_ENABLE_GP IMX_GPIO_NR(6, 16) 210 211 /* Button assignments for J14 */ 212 static iomux_v3_cfg_t const button_pads[] = { 213 /* Menu */ 214 MX6_PAD_NANDF_D1__GPIO_2_1 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), 215 /* Back */ 216 MX6_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), 217 /* Labelled Search (mapped to Power under Android) */ 218 MX6_PAD_NANDF_D3__GPIO_2_3 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), 219 /* Home */ 220 MX6_PAD_NANDF_D4__GPIO_2_4 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), 221 /* Volume Down */ 222 MX6_PAD_GPIO_19__GPIO_4_5 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), 223 /* Volume Up */ 224 MX6_PAD_GPIO_18__GPIO_7_13 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), 225 }; 226 227 static void setup_iomux_enet(void) 228 { 229 gpio_direction_output(IMX_GPIO_NR(3, 23), 0); /* SABRE Lite PHY rst */ 230 gpio_direction_output(IMX_GPIO_NR(1, 27), 0); /* Nitrogen6X PHY rst */ 231 gpio_direction_output(IMX_GPIO_NR(6, 30), 1); 232 gpio_direction_output(IMX_GPIO_NR(6, 25), 1); 233 gpio_direction_output(IMX_GPIO_NR(6, 27), 1); 234 gpio_direction_output(IMX_GPIO_NR(6, 28), 1); 235 gpio_direction_output(IMX_GPIO_NR(6, 29), 1); 236 imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1)); 237 gpio_direction_output(IMX_GPIO_NR(6, 24), 1); 238 239 /* Need delay 10ms according to KSZ9021 spec */ 240 udelay(1000 * 10); 241 gpio_set_value(IMX_GPIO_NR(3, 23), 1); /* SABRE Lite PHY reset */ 242 gpio_set_value(IMX_GPIO_NR(1, 27), 1); /* Nitrogen6X PHY reset */ 243 244 imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); 245 } 246 247 iomux_v3_cfg_t const usb_pads[] = { 248 MX6_PAD_GPIO_17__GPIO_7_12 | MUX_PAD_CTRL(NO_PAD_CTRL), 249 }; 250 251 static void setup_iomux_uart(void) 252 { 253 imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); 254 imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); 255 } 256 257 #ifdef CONFIG_USB_EHCI_MX6 258 int board_ehci_hcd_init(int port) 259 { 260 imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads)); 261 262 /* Reset USB hub */ 263 gpio_direction_output(IMX_GPIO_NR(7, 12), 0); 264 mdelay(2); 265 gpio_set_value(IMX_GPIO_NR(7, 12), 1); 266 267 return 0; 268 } 269 #endif 270 271 #ifdef CONFIG_FSL_ESDHC 272 struct fsl_esdhc_cfg usdhc_cfg[2] = { 273 {USDHC3_BASE_ADDR}, 274 {USDHC4_BASE_ADDR}, 275 }; 276 277 int board_mmc_getcd(struct mmc *mmc) 278 { 279 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 280 int ret; 281 282 if (cfg->esdhc_base == USDHC3_BASE_ADDR) { 283 gpio_direction_input(IMX_GPIO_NR(7, 0)); 284 ret = !gpio_get_value(IMX_GPIO_NR(7, 0)); 285 } else { 286 gpio_direction_input(IMX_GPIO_NR(2, 6)); 287 ret = !gpio_get_value(IMX_GPIO_NR(2, 6)); 288 } 289 290 return ret; 291 } 292 293 int board_mmc_init(bd_t *bis) 294 { 295 s32 status = 0; 296 u32 index = 0; 297 298 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); 299 usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); 300 301 usdhc_cfg[0].max_bus_width = 4; 302 usdhc_cfg[1].max_bus_width = 4; 303 304 for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { 305 switch (index) { 306 case 0: 307 imx_iomux_v3_setup_multiple_pads( 308 usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); 309 break; 310 case 1: 311 imx_iomux_v3_setup_multiple_pads( 312 usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); 313 break; 314 default: 315 printf("Warning: you configured more USDHC controllers" 316 "(%d) then supported by the board (%d)\n", 317 index + 1, CONFIG_SYS_FSL_USDHC_NUM); 318 return status; 319 } 320 321 status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]); 322 } 323 324 return status; 325 } 326 #endif 327 328 #ifdef CONFIG_MXC_SPI 329 iomux_v3_cfg_t const ecspi1_pads[] = { 330 /* SS1 */ 331 MX6_PAD_EIM_D19__GPIO_3_19 | MUX_PAD_CTRL(SPI_PAD_CTRL), 332 MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), 333 MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), 334 MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), 335 }; 336 337 void setup_spi(void) 338 { 339 gpio_direction_output(CONFIG_SF_DEFAULT_CS, 1); 340 imx_iomux_v3_setup_multiple_pads(ecspi1_pads, 341 ARRAY_SIZE(ecspi1_pads)); 342 } 343 #endif 344 345 int board_phy_config(struct phy_device *phydev) 346 { 347 /* min rx data delay */ 348 ksz9021_phy_extended_write(phydev, 349 MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x0); 350 /* min tx data delay */ 351 ksz9021_phy_extended_write(phydev, 352 MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x0); 353 /* max rx/tx clock delay, min rx/tx control */ 354 ksz9021_phy_extended_write(phydev, 355 MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf0f0); 356 if (phydev->drv->config) 357 phydev->drv->config(phydev); 358 359 return 0; 360 } 361 362 int board_eth_init(bd_t *bis) 363 { 364 uint32_t base = IMX_FEC_BASE; 365 struct mii_dev *bus = NULL; 366 struct phy_device *phydev = NULL; 367 int ret; 368 369 setup_iomux_enet(); 370 371 #ifdef CONFIG_FEC_MXC 372 bus = fec_get_miibus(base, -1); 373 if (!bus) 374 return 0; 375 /* scan phy 4,5,6,7 */ 376 phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII); 377 if (!phydev) { 378 free(bus); 379 return 0; 380 } 381 printf("using phy at %d\n", phydev->addr); 382 ret = fec_probe(bis, -1, base, bus, phydev); 383 if (ret) { 384 printf("FEC MXC: %s:failed\n", __func__); 385 free(phydev); 386 free(bus); 387 } 388 #endif 389 return 0; 390 } 391 392 static void setup_buttons(void) 393 { 394 imx_iomux_v3_setup_multiple_pads(button_pads, 395 ARRAY_SIZE(button_pads)); 396 } 397 398 #ifdef CONFIG_CMD_SATA 399 400 int setup_sata(void) 401 { 402 struct iomuxc_base_regs *const iomuxc_regs 403 = (struct iomuxc_base_regs *) IOMUXC_BASE_ADDR; 404 int ret = enable_sata_clock(); 405 if (ret) 406 return ret; 407 408 clrsetbits_le32(&iomuxc_regs->gpr[13], 409 IOMUXC_GPR13_SATA_MASK, 410 IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB 411 |IOMUXC_GPR13_SATA_PHY_7_SATA2M 412 |IOMUXC_GPR13_SATA_SPEED_3G 413 |(3<<IOMUXC_GPR13_SATA_PHY_6_SHIFT) 414 |IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED 415 |IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16 416 |IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB 417 |IOMUXC_GPR13_SATA_PHY_2_TX_1P104V 418 |IOMUXC_GPR13_SATA_PHY_1_SLOW); 419 420 return 0; 421 } 422 #endif 423 424 #if defined(CONFIG_VIDEO_IPUV3) 425 426 static iomux_v3_cfg_t const backlight_pads[] = { 427 /* Backlight on RGB connector: J15 */ 428 MX6_PAD_SD1_DAT3__GPIO_1_21 | MUX_PAD_CTRL(NO_PAD_CTRL), 429 #define RGB_BACKLIGHT_GP IMX_GPIO_NR(1, 21) 430 431 /* Backlight on LVDS connector: J6 */ 432 MX6_PAD_SD1_CMD__GPIO_1_18 | MUX_PAD_CTRL(NO_PAD_CTRL), 433 #define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 18) 434 }; 435 436 static iomux_v3_cfg_t const rgb_pads[] = { 437 MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK, 438 MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15, 439 MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2, 440 MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3, 441 MX6_PAD_DI0_PIN4__GPIO_4_20, 442 MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0, 443 MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1, 444 MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2, 445 MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3, 446 MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4, 447 MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5, 448 MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6, 449 MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7, 450 MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8, 451 MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9, 452 MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10, 453 MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11, 454 MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12, 455 MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13, 456 MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14, 457 MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15, 458 MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16, 459 MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17, 460 MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18, 461 MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19, 462 MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20, 463 MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21, 464 MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22, 465 MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23, 466 }; 467 468 struct display_info_t { 469 int bus; 470 int addr; 471 int pixfmt; 472 int (*detect)(struct display_info_t const *dev); 473 void (*enable)(struct display_info_t const *dev); 474 struct fb_videomode mode; 475 }; 476 477 478 static int detect_hdmi(struct display_info_t const *dev) 479 { 480 struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; 481 return readb(&hdmi->phy_stat0) & HDMI_PHY_HPD; 482 } 483 484 static void enable_hdmi(struct display_info_t const *dev) 485 { 486 struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; 487 u8 reg; 488 printf("%s: setup HDMI monitor\n", __func__); 489 reg = readb(&hdmi->phy_conf0); 490 reg |= HDMI_PHY_CONF0_PDZ_MASK; 491 writeb(reg, &hdmi->phy_conf0); 492 493 udelay(3000); 494 reg |= HDMI_PHY_CONF0_ENTMDS_MASK; 495 writeb(reg, &hdmi->phy_conf0); 496 udelay(3000); 497 reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK; 498 writeb(reg, &hdmi->phy_conf0); 499 writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz); 500 } 501 502 static int detect_i2c(struct display_info_t const *dev) 503 { 504 return ((0 == i2c_set_bus_num(dev->bus)) 505 && 506 (0 == i2c_probe(dev->addr))); 507 } 508 509 static void enable_lvds(struct display_info_t const *dev) 510 { 511 struct iomuxc *iomux = (struct iomuxc *) 512 IOMUXC_BASE_ADDR; 513 u32 reg = readl(&iomux->gpr[2]); 514 reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT; 515 writel(reg, &iomux->gpr[2]); 516 gpio_direction_output(LVDS_BACKLIGHT_GP, 1); 517 } 518 519 static void enable_rgb(struct display_info_t const *dev) 520 { 521 imx_iomux_v3_setup_multiple_pads( 522 rgb_pads, 523 ARRAY_SIZE(rgb_pads)); 524 gpio_direction_output(RGB_BACKLIGHT_GP, 1); 525 } 526 527 static struct display_info_t const displays[] = {{ 528 .bus = -1, 529 .addr = 0, 530 .pixfmt = IPU_PIX_FMT_RGB24, 531 .detect = detect_hdmi, 532 .enable = enable_hdmi, 533 .mode = { 534 .name = "HDMI", 535 .refresh = 60, 536 .xres = 1024, 537 .yres = 768, 538 .pixclock = 15385, 539 .left_margin = 220, 540 .right_margin = 40, 541 .upper_margin = 21, 542 .lower_margin = 7, 543 .hsync_len = 60, 544 .vsync_len = 10, 545 .sync = FB_SYNC_EXT, 546 .vmode = FB_VMODE_NONINTERLACED 547 } }, { 548 .bus = 2, 549 .addr = 0x4, 550 .pixfmt = IPU_PIX_FMT_LVDS666, 551 .detect = detect_i2c, 552 .enable = enable_lvds, 553 .mode = { 554 .name = "Hannstar-XGA", 555 .refresh = 60, 556 .xres = 1024, 557 .yres = 768, 558 .pixclock = 15385, 559 .left_margin = 220, 560 .right_margin = 40, 561 .upper_margin = 21, 562 .lower_margin = 7, 563 .hsync_len = 60, 564 .vsync_len = 10, 565 .sync = FB_SYNC_EXT, 566 .vmode = FB_VMODE_NONINTERLACED 567 } }, { 568 .bus = 2, 569 .addr = 0x38, 570 .pixfmt = IPU_PIX_FMT_LVDS666, 571 .detect = detect_i2c, 572 .enable = enable_lvds, 573 .mode = { 574 .name = "wsvga-lvds", 575 .refresh = 60, 576 .xres = 1024, 577 .yres = 600, 578 .pixclock = 15385, 579 .left_margin = 220, 580 .right_margin = 40, 581 .upper_margin = 21, 582 .lower_margin = 7, 583 .hsync_len = 60, 584 .vsync_len = 10, 585 .sync = FB_SYNC_EXT, 586 .vmode = FB_VMODE_NONINTERLACED 587 } }, { 588 .bus = 2, 589 .addr = 0x48, 590 .pixfmt = IPU_PIX_FMT_RGB666, 591 .detect = detect_i2c, 592 .enable = enable_rgb, 593 .mode = { 594 .name = "wvga-rgb", 595 .refresh = 57, 596 .xres = 800, 597 .yres = 480, 598 .pixclock = 37037, 599 .left_margin = 40, 600 .right_margin = 60, 601 .upper_margin = 10, 602 .lower_margin = 10, 603 .hsync_len = 20, 604 .vsync_len = 10, 605 .sync = 0, 606 .vmode = FB_VMODE_NONINTERLACED 607 } } }; 608 609 int board_video_skip(void) 610 { 611 int i; 612 int ret; 613 char const *panel = getenv("panel"); 614 if (!panel) { 615 for (i = 0; i < ARRAY_SIZE(displays); i++) { 616 struct display_info_t const *dev = displays+i; 617 if (dev->detect(dev)) { 618 panel = dev->mode.name; 619 printf("auto-detected panel %s\n", panel); 620 break; 621 } 622 } 623 if (!panel) { 624 panel = displays[0].mode.name; 625 printf("No panel detected: default to %s\n", panel); 626 } 627 } else { 628 for (i = 0; i < ARRAY_SIZE(displays); i++) { 629 if (!strcmp(panel, displays[i].mode.name)) 630 break; 631 } 632 } 633 if (i < ARRAY_SIZE(displays)) { 634 ret = ipuv3_fb_init(&displays[i].mode, 0, 635 displays[i].pixfmt); 636 if (!ret) { 637 displays[i].enable(displays+i); 638 printf("Display: %s (%ux%u)\n", 639 displays[i].mode.name, 640 displays[i].mode.xres, 641 displays[i].mode.yres); 642 } else 643 printf("LCD %s cannot be configured: %d\n", 644 displays[i].mode.name, ret); 645 } else { 646 printf("unsupported panel %s\n", panel); 647 ret = -EINVAL; 648 } 649 return (0 != ret); 650 } 651 652 static void setup_display(void) 653 { 654 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; 655 struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; 656 struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; 657 struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; 658 659 int reg; 660 661 /* Turn on LDB0,IPU,IPU DI0 clocks */ 662 reg = __raw_readl(&mxc_ccm->CCGR3); 663 reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET 664 |MXC_CCM_CCGR3_LDB_DI0_MASK; 665 writel(reg, &mxc_ccm->CCGR3); 666 667 /* Turn on HDMI PHY clock */ 668 reg = __raw_readl(&mxc_ccm->CCGR2); 669 reg |= MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK 670 |MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK; 671 writel(reg, &mxc_ccm->CCGR2); 672 673 /* clear HDMI PHY reset */ 674 writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz); 675 676 /* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */ 677 writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr); 678 writel(0x13<<ANATOP_PFD_480_PFD1_FRAC_SHIFT, &anatop->pfd_480_set); 679 680 /* set LDB0, LDB1 clk select to 011/011 */ 681 reg = readl(&mxc_ccm->cs2cdr); 682 reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK 683 |MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK); 684 reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) 685 |(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET); 686 writel(reg, &mxc_ccm->cs2cdr); 687 688 reg = readl(&mxc_ccm->cscmr2); 689 reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV; 690 writel(reg, &mxc_ccm->cscmr2); 691 692 reg = readl(&mxc_ccm->chsccdr); 693 reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK 694 |MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK 695 |MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK); 696 reg |= (CHSCCDR_CLK_SEL_LDB_DI0 697 <<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET) 698 |(CHSCCDR_PODF_DIVIDE_BY_3 699 <<MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET) 700 |(CHSCCDR_IPU_PRE_CLK_540M_PFD 701 <<MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET); 702 writel(reg, &mxc_ccm->chsccdr); 703 704 reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES 705 |IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH 706 |IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW 707 |IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG 708 |IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT 709 |IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG 710 |IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT 711 |IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED 712 |IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0; 713 writel(reg, &iomux->gpr[2]); 714 715 reg = readl(&iomux->gpr[3]); 716 reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK) 717 | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 718 <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET); 719 writel(reg, &iomux->gpr[3]); 720 721 /* backlights off until needed */ 722 imx_iomux_v3_setup_multiple_pads(backlight_pads, 723 ARRAY_SIZE(backlight_pads)); 724 gpio_direction_input(LVDS_BACKLIGHT_GP); 725 gpio_direction_input(RGB_BACKLIGHT_GP); 726 } 727 #endif 728 729 int board_early_init_f(void) 730 { 731 setup_iomux_uart(); 732 733 /* Disable wl1271 For Nitrogen6w */ 734 gpio_direction_input(WL12XX_WL_IRQ_GP); 735 gpio_direction_output(WL12XX_WL_ENABLE_GP, 0); 736 gpio_direction_output(WL12XX_BT_ENABLE_GP, 0); 737 738 imx_iomux_v3_setup_multiple_pads(wl12xx_pads, ARRAY_SIZE(wl12xx_pads)); 739 setup_buttons(); 740 741 #if defined(CONFIG_VIDEO_IPUV3) 742 setup_display(); 743 #endif 744 return 0; 745 } 746 747 /* 748 * Do not overwrite the console 749 * Use always serial for U-Boot console 750 */ 751 int overwrite_console(void) 752 { 753 return 1; 754 } 755 756 int board_init(void) 757 { 758 /* address of boot parameters */ 759 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 760 761 #ifdef CONFIG_MXC_SPI 762 setup_spi(); 763 #endif 764 setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0); 765 setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); 766 setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); 767 768 #ifdef CONFIG_CMD_SATA 769 setup_sata(); 770 #endif 771 772 return 0; 773 } 774 775 int checkboard(void) 776 { 777 if (gpio_get_value(WL12XX_WL_IRQ_GP)) 778 puts("Board: Nitrogen6X\n"); 779 else 780 puts("Board: SABRE Lite\n"); 781 782 return 0; 783 } 784 785 struct button_key { 786 char const *name; 787 unsigned gpnum; 788 char ident; 789 }; 790 791 static struct button_key const buttons[] = { 792 {"back", IMX_GPIO_NR(2, 2), 'B'}, 793 {"home", IMX_GPIO_NR(2, 4), 'H'}, 794 {"menu", IMX_GPIO_NR(2, 1), 'M'}, 795 {"search", IMX_GPIO_NR(2, 3), 'S'}, 796 {"volup", IMX_GPIO_NR(7, 13), 'V'}, 797 {"voldown", IMX_GPIO_NR(4, 5), 'v'}, 798 }; 799 800 /* 801 * generate a null-terminated string containing the buttons pressed 802 * returns number of keys pressed 803 */ 804 static int read_keys(char *buf) 805 { 806 int i, numpressed = 0; 807 for (i = 0; i < ARRAY_SIZE(buttons); i++) { 808 if (!gpio_get_value(buttons[i].gpnum)) 809 buf[numpressed++] = buttons[i].ident; 810 } 811 buf[numpressed] = '\0'; 812 return numpressed; 813 } 814 815 static int do_kbd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 816 { 817 char envvalue[ARRAY_SIZE(buttons)+1]; 818 int numpressed = read_keys(envvalue); 819 setenv("keybd", envvalue); 820 return numpressed == 0; 821 } 822 823 U_BOOT_CMD( 824 kbd, 1, 1, do_kbd, 825 "Tests for keypresses, sets 'keybd' environment variable", 826 "Returns 0 (true) to shell if key is pressed." 827 ); 828 829 #ifdef CONFIG_PREBOOT 830 static char const kbd_magic_prefix[] = "key_magic"; 831 static char const kbd_command_prefix[] = "key_cmd"; 832 833 static void preboot_keys(void) 834 { 835 int numpressed; 836 char keypress[ARRAY_SIZE(buttons)+1]; 837 numpressed = read_keys(keypress); 838 if (numpressed) { 839 char *kbd_magic_keys = getenv("magic_keys"); 840 char *suffix; 841 /* 842 * loop over all magic keys 843 */ 844 for (suffix = kbd_magic_keys; *suffix; ++suffix) { 845 char *keys; 846 char magic[sizeof(kbd_magic_prefix) + 1]; 847 sprintf(magic, "%s%c", kbd_magic_prefix, *suffix); 848 keys = getenv(magic); 849 if (keys) { 850 if (!strcmp(keys, keypress)) 851 break; 852 } 853 } 854 if (*suffix) { 855 char cmd_name[sizeof(kbd_command_prefix) + 1]; 856 char *cmd; 857 sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix); 858 cmd = getenv(cmd_name); 859 if (cmd) { 860 setenv("preboot", cmd); 861 return; 862 } 863 } 864 } 865 } 866 #endif 867 868 #ifdef CONFIG_CMD_BMODE 869 static const struct boot_mode board_boot_modes[] = { 870 /* 4 bit bus width */ 871 {"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, 872 {"mmc1", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, 873 {NULL, 0}, 874 }; 875 #endif 876 877 int misc_init_r(void) 878 { 879 #ifdef CONFIG_PREBOOT 880 preboot_keys(); 881 #endif 882 883 #ifdef CONFIG_CMD_BMODE 884 add_board_boot_modes(board_boot_modes); 885 #endif 886 return 0; 887 } 888