1 /* 2 * Copyright (C) 2014, Barco (www.barco.com) 3 * Copyright (C) 2014 Stefan Roese <sr@denx.de> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <mmc.h> 10 #include <fsl_esdhc.h> 11 #include <miiphy.h> 12 #include <netdev.h> 13 #include <asm/io.h> 14 #include <asm/arch/clock.h> 15 #include <asm/arch/imx-regs.h> 16 #include <asm/arch/iomux.h> 17 #include <asm/arch/mx6-pins.h> 18 #include <asm/arch/crm_regs.h> 19 #include <asm/arch/sys_proto.h> 20 #include <asm/gpio.h> 21 #include <asm/imx-common/iomux-v3.h> 22 #include <asm/imx-common/boot_mode.h> 23 24 #include "platinum.h" 25 26 DECLARE_GLOBAL_DATA_PTR; 27 28 iomux_v3_cfg_t const usdhc3_pads[] = { 29 MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 30 MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 31 MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 32 MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 33 MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 34 MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 35 MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ 36 }; 37 38 iomux_v3_cfg_t nfc_pads[] = { 39 MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL), 40 MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL), 41 MX6_PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL), 42 MX6_PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL), 43 MX6_PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NO_PAD_CTRL), 44 MX6_PAD_NANDF_CS1__NAND_CE1_B | MUX_PAD_CTRL(NO_PAD_CTRL), 45 MX6_PAD_NANDF_CS2__NAND_CE2_B | MUX_PAD_CTRL(NO_PAD_CTRL), 46 MX6_PAD_NANDF_CS3__NAND_CE3_B | MUX_PAD_CTRL(NO_PAD_CTRL), 47 MX6_PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL), 48 MX6_PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL), 49 MX6_PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL), 50 MX6_PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL), 51 MX6_PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL), 52 MX6_PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL), 53 MX6_PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL), 54 MX6_PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL), 55 MX6_PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL), 56 MX6_PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL), 57 MX6_PAD_SD4_DAT0__NAND_DQS | MUX_PAD_CTRL(NO_PAD_CTRL), 58 }; 59 60 struct fsl_esdhc_cfg usdhc_cfg[] = { 61 { USDHC3_BASE_ADDR }, 62 }; 63 64 void setup_gpmi_nand(void) 65 { 66 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; 67 68 /* config gpmi nand iomux */ 69 imx_iomux_v3_setup_multiple_pads(nfc_pads, ARRAY_SIZE(nfc_pads)); 70 71 /* config gpmi and bch clock to 100 MHz */ 72 clrsetbits_le32(&mxc_ccm->cs2cdr, 73 MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK | 74 MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK | 75 MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK, 76 MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) | 77 MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) | 78 MXC_CCM_CS2CDR_ENFC_CLK_SEL(3)); 79 80 /* enable gpmi and bch clock gating */ 81 setbits_le32(&mxc_ccm->CCGR4, 82 MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK | 83 MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK | 84 MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK | 85 MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK | 86 MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET); 87 88 /* enable apbh clock gating */ 89 setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK); 90 } 91 92 int dram_init(void) 93 { 94 gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); 95 96 return 0; 97 } 98 99 int board_ehci_hcd_init(int port) 100 { 101 return 0; 102 } 103 104 int board_mmc_getcd(struct mmc *mmc) 105 { 106 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 107 108 if (cfg->esdhc_base == usdhc_cfg[0].esdhc_base) { 109 unsigned sd3_cd = IMX_GPIO_NR(7, 0); 110 gpio_direction_input(sd3_cd); 111 return !gpio_get_value(sd3_cd); 112 } 113 114 return 0; 115 } 116 117 int board_mmc_init(bd_t *bis) 118 { 119 imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); 120 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); 121 122 return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); 123 } 124 125 void board_init_gpio(void) 126 { 127 platinum_init_gpio(); 128 } 129 130 void board_init_gpmi_nand(void) 131 { 132 setup_gpmi_nand(); 133 } 134 135 void board_init_i2c(void) 136 { 137 platinum_setup_i2c(); 138 } 139 140 void board_init_spi(void) 141 { 142 platinum_setup_spi(); 143 } 144 145 void board_init_uart(void) 146 { 147 platinum_setup_uart(); 148 } 149 150 void board_init_usb(void) 151 { 152 platinum_init_usb(); 153 } 154 155 void board_init_finished(void) 156 { 157 platinum_init_finished(); 158 } 159 160 int board_phy_config(struct phy_device *phydev) 161 { 162 return platinum_phy_config(phydev); 163 } 164 165 int board_eth_init(bd_t *bis) 166 { 167 return cpu_eth_init(bis); 168 } 169 170 int board_early_init_f(void) 171 { 172 board_init_uart(); 173 174 return 0; 175 } 176 177 int board_init(void) 178 { 179 /* address of boot parameters */ 180 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 181 182 board_init_spi(); 183 184 board_init_i2c(); 185 186 board_init_gpmi_nand(); 187 188 board_init_gpio(); 189 190 board_init_usb(); 191 192 board_init_finished(); 193 194 return 0; 195 } 196 197 int checkboard(void) 198 { 199 puts("Board: " CONFIG_PLATINUM_BOARD "\n"); 200 return 0; 201 } 202 203 static const struct boot_mode board_boot_modes[] = { 204 /* NAND */ 205 { "nand", MAKE_CFGVAL(0x80, 0x02, 0x00, 0x00) }, 206 /* 4 bit bus width */ 207 { "mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00) }, 208 { "mmc1", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00) }, 209 { NULL, 0 }, 210 }; 211 212 int misc_init_r(void) 213 { 214 add_board_boot_modes(board_boot_modes); 215 216 return 0; 217 } 218