1 /* 2 * Copyright (C) 2014 Atmel 3 * Bo Shen <voice.shen@atmel.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <asm/io.h> 10 #include <asm/arch/at91_common.h> 11 #include <asm/arch/at91_rstc.h> 12 #include <asm/arch/atmel_mpddrc.h> 13 #include <asm/arch/gpio.h> 14 #include <asm/arch/clk.h> 15 #include <asm/arch/sama5d3_smc.h> 16 #include <asm/arch/sama5d4.h> 17 #include <atmel_hlcdc.h> 18 #include <debug_uart.h> 19 #include <lcd.h> 20 #include <nand.h> 21 #include <version.h> 22 23 DECLARE_GLOBAL_DATA_PTR; 24 25 #ifdef CONFIG_NAND_ATMEL 26 static void sama5d4ek_nand_hw_init(void) 27 { 28 struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; 29 30 at91_periph_clk_enable(ATMEL_ID_SMC); 31 32 /* Configure SMC CS3 for NAND */ 33 writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) | 34 AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1), 35 &smc->cs[3].setup); 36 writel(AT91_SMC_PULSE_NWE(2) | AT91_SMC_PULSE_NCS_WR(3) | 37 AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(3), 38 &smc->cs[3].pulse); 39 writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), 40 &smc->cs[3].cycle); 41 writel(AT91_SMC_TIMINGS_TCLR(2) | AT91_SMC_TIMINGS_TADL(7) | 42 AT91_SMC_TIMINGS_TAR(2) | AT91_SMC_TIMINGS_TRR(3) | 43 AT91_SMC_TIMINGS_TWB(7) | AT91_SMC_TIMINGS_RBNSEL(3)| 44 AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings); 45 writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | 46 AT91_SMC_MODE_EXNW_DISABLE | 47 AT91_SMC_MODE_DBW_8 | 48 AT91_SMC_MODE_TDF_CYCLE(3), 49 &smc->cs[3].mode); 50 51 at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0); /* D0 */ 52 at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0); /* D1 */ 53 at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0); /* D2 */ 54 at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0); /* D3 */ 55 at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0); /* D4 */ 56 at91_pio3_set_a_periph(AT91_PIO_PORTC, 10, 0); /* D5 */ 57 at91_pio3_set_a_periph(AT91_PIO_PORTC, 11, 0); /* D6 */ 58 at91_pio3_set_a_periph(AT91_PIO_PORTC, 12, 0); /* D7 */ 59 at91_pio3_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RE */ 60 at91_pio3_set_a_periph(AT91_PIO_PORTC, 14, 0); /* WE */ 61 at91_pio3_set_a_periph(AT91_PIO_PORTC, 15, 1); /* NCS */ 62 at91_pio3_set_a_periph(AT91_PIO_PORTC, 16, 1); /* RDY */ 63 at91_pio3_set_a_periph(AT91_PIO_PORTC, 17, 1); /* ALE */ 64 at91_pio3_set_a_periph(AT91_PIO_PORTC, 18, 1); /* CLE */ 65 } 66 #endif 67 68 #ifdef CONFIG_CMD_USB 69 static void sama5d4ek_usb_hw_init(void) 70 { 71 at91_set_pio_output(AT91_PIO_PORTE, 11, 0); 72 at91_set_pio_output(AT91_PIO_PORTE, 12, 0); 73 at91_set_pio_output(AT91_PIO_PORTE, 10, 0); 74 } 75 #endif 76 77 #ifdef CONFIG_LCD 78 vidinfo_t panel_info = { 79 .vl_col = 800, 80 .vl_row = 480, 81 .vl_clk = 33260000, 82 .vl_bpix = LCD_BPP, 83 .vl_tft = 1, 84 .vl_hsync_len = 5, 85 .vl_left_margin = 128, 86 .vl_right_margin = 0, 87 .vl_vsync_len = 5, 88 .vl_upper_margin = 23, 89 .vl_lower_margin = 22, 90 .mmio = ATMEL_BASE_LCDC, 91 }; 92 93 /* No power up/down pin for the LCD pannel */ 94 void lcd_enable(void) { /* Empty! */ } 95 void lcd_disable(void) { /* Empty! */ } 96 97 unsigned int has_lcdc(void) 98 { 99 return 1; 100 } 101 102 static void sama5d4ek_lcd_hw_init(void) 103 { 104 at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */ 105 at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ 106 at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ 107 at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ 108 at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ 109 at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */ 110 111 at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ 112 at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ 113 at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ 114 at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ 115 at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ 116 at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ 117 118 at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ 119 at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ 120 at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ 121 at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ 122 at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ 123 at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ 124 125 at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */ 126 at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */ 127 at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */ 128 at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */ 129 at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */ 130 at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */ 131 132 /* Enable clock */ 133 at91_periph_clk_enable(ATMEL_ID_LCDC); 134 } 135 136 #ifdef CONFIG_LCD_INFO 137 void lcd_show_board_info(void) 138 { 139 ulong dram_size, nand_size; 140 int i; 141 char temp[32]; 142 143 lcd_printf("%s\n", U_BOOT_VERSION); 144 lcd_printf("2014 ATMEL Corp\n"); 145 lcd_printf("at91@atmel.com\n"); 146 lcd_printf("%s CPU at %s MHz\n", get_cpu_name(), 147 strmhz(temp, get_cpu_clk_rate())); 148 149 dram_size = 0; 150 for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) 151 dram_size += gd->bd->bi_dram[i].size; 152 153 nand_size = 0; 154 #ifdef CONFIG_NAND_ATMEL 155 for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) 156 nand_size += nand_info[i]->size; 157 #endif 158 lcd_printf("%ld MB SDRAM, %ld MB NAND\n", 159 dram_size >> 20, nand_size >> 20); 160 } 161 #endif /* CONFIG_LCD_INFO */ 162 163 #endif /* CONFIG_LCD */ 164 165 #ifdef CONFIG_DEBUG_UART_BOARD_INIT 166 static void sama5d4ek_serial3_hw_init(void) 167 { 168 at91_pio3_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */ 169 at91_pio3_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */ 170 171 /* Enable clock */ 172 at91_periph_clk_enable(ATMEL_ID_USART3); 173 } 174 175 void board_debug_uart_init(void) 176 { 177 sama5d4ek_serial3_hw_init(); 178 } 179 #endif 180 181 #ifdef CONFIG_BOARD_EARLY_INIT_F 182 int board_early_init_f(void) 183 { 184 #ifdef CONFIG_DEBUG_UART 185 debug_uart_init(); 186 #endif 187 return 0; 188 } 189 #endif 190 191 int board_init(void) 192 { 193 /* adress of boot parameters */ 194 gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; 195 196 #ifdef CONFIG_NAND_ATMEL 197 sama5d4ek_nand_hw_init(); 198 #endif 199 #ifdef CONFIG_LCD 200 sama5d4ek_lcd_hw_init(); 201 #endif 202 #ifdef CONFIG_CMD_USB 203 sama5d4ek_usb_hw_init(); 204 #endif 205 206 return 0; 207 } 208 209 int dram_init(void) 210 { 211 gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, 212 CONFIG_SYS_SDRAM_SIZE); 213 return 0; 214 } 215 216 /* SPL */ 217 #ifdef CONFIG_SPL_BUILD 218 void spl_board_init(void) 219 { 220 #if CONFIG_SYS_USE_NANDFLASH 221 sama5d4ek_nand_hw_init(); 222 #endif 223 } 224 225 static void ddr2_conf(struct atmel_mpddrc_config *ddr2) 226 { 227 ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM); 228 229 ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 | 230 ATMEL_MPDDRC_CR_NR_ROW_14 | 231 ATMEL_MPDDRC_CR_CAS_DDR_CAS3 | 232 ATMEL_MPDDRC_CR_NB_8BANKS | 233 ATMEL_MPDDRC_CR_NDQS_DISABLED | 234 ATMEL_MPDDRC_CR_DECOD_INTERLEAVED | 235 ATMEL_MPDDRC_CR_UNAL_SUPPORTED); 236 237 ddr2->rtr = 0x2b0; 238 239 ddr2->tpr0 = (8 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET | 240 3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET | 241 3 << ATMEL_MPDDRC_TPR0_TWR_OFFSET | 242 10 << ATMEL_MPDDRC_TPR0_TRC_OFFSET | 243 3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET | 244 2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET | 245 2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET | 246 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET); 247 248 ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET | 249 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET | 250 25 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET | 251 23 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET); 252 253 ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET | 254 2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET | 255 3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET | 256 2 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET | 257 8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); 258 } 259 260 void mem_init(void) 261 { 262 struct atmel_mpddrc_config ddr2; 263 264 ddr2_conf(&ddr2); 265 266 /* Enable MPDDR clock */ 267 at91_periph_clk_enable(ATMEL_ID_MPDDRC); 268 at91_system_clk_enable(AT91_PMC_DDR); 269 270 /* DDRAM2 Controller initialize */ 271 ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2); 272 } 273 274 void at91_pmc_init(void) 275 { 276 u32 tmp; 277 278 tmp = AT91_PMC_PLLAR_29 | 279 AT91_PMC_PLLXR_PLLCOUNT(0x3f) | 280 AT91_PMC_PLLXR_MUL(87) | 281 AT91_PMC_PLLXR_DIV(1); 282 at91_plla_init(tmp); 283 284 at91_pllicpr_init(AT91_PMC_IPLL_PLLA(0x0)); 285 286 tmp = AT91_PMC_MCKR_H32MXDIV | 287 AT91_PMC_MCKR_PLLADIV_2 | 288 AT91_PMC_MCKR_MDIV_3 | 289 AT91_PMC_MCKR_CSS_PLLA; 290 at91_mck_init(tmp); 291 } 292 #endif 293