1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (C) 2015 Atmel Corporation 4 * Wenyou.Yang <wenyou.yang@atmel.com> 5 */ 6 7 #include <common.h> 8 #include <debug_uart.h> 9 #include <asm/io.h> 10 #include <asm/arch/at91_common.h> 11 #include <asm/arch/atmel_pio4.h> 12 #include <asm/arch/atmel_mpddrc.h> 13 #include <asm/arch/atmel_sdhci.h> 14 #include <asm/arch/clk.h> 15 #include <asm/arch/gpio.h> 16 #include <asm/arch/sama5d2.h> 17 18 extern void at91_pda_detect(void); 19 20 DECLARE_GLOBAL_DATA_PTR; 21 22 static void board_usb_hw_init(void) 23 { 24 atmel_pio4_set_pio_output(AT91_PIO_PORTB, 10, 1); 25 } 26 27 #ifdef CONFIG_BOARD_LATE_INIT 28 int board_late_init(void) 29 { 30 #ifdef CONFIG_DM_VIDEO 31 at91_video_show_board_info(); 32 #endif 33 at91_pda_detect(); 34 return 0; 35 } 36 #endif 37 38 #ifdef CONFIG_DEBUG_UART_BOARD_INIT 39 static void board_uart1_hw_init(void) 40 { 41 atmel_pio4_set_a_periph(AT91_PIO_PORTD, 2, ATMEL_PIO_PUEN_MASK); /* URXD1 */ 42 atmel_pio4_set_a_periph(AT91_PIO_PORTD, 3, 0); /* UTXD1 */ 43 44 at91_periph_clk_enable(ATMEL_ID_UART1); 45 } 46 47 void board_debug_uart_init(void) 48 { 49 board_uart1_hw_init(); 50 } 51 #endif 52 53 #ifdef CONFIG_BOARD_EARLY_INIT_F 54 int board_early_init_f(void) 55 { 56 #ifdef CONFIG_DEBUG_UART 57 debug_uart_init(); 58 #endif 59 60 return 0; 61 } 62 #endif 63 64 int board_init(void) 65 { 66 /* address of boot parameters */ 67 gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; 68 69 #ifdef CONFIG_CMD_USB 70 board_usb_hw_init(); 71 #endif 72 73 return 0; 74 } 75 76 int dram_init(void) 77 { 78 gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, 79 CONFIG_SYS_SDRAM_SIZE); 80 return 0; 81 } 82 83 #define AT24MAC_MAC_OFFSET 0x9a 84 85 #ifdef CONFIG_MISC_INIT_R 86 int misc_init_r(void) 87 { 88 #ifdef CONFIG_I2C_EEPROM 89 at91_set_ethaddr(AT24MAC_MAC_OFFSET); 90 #endif 91 92 return 0; 93 } 94 #endif 95 96 /* SPL */ 97 #ifdef CONFIG_SPL_BUILD 98 void spl_board_init(void) 99 { 100 } 101 102 static void ddrc_conf(struct atmel_mpddrc_config *ddrc) 103 { 104 ddrc->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR3_SDRAM); 105 106 ddrc->cr = (ATMEL_MPDDRC_CR_NC_COL_10 | 107 ATMEL_MPDDRC_CR_NR_ROW_14 | 108 ATMEL_MPDDRC_CR_CAS_DDR_CAS5 | 109 ATMEL_MPDDRC_CR_DIC_DS | 110 ATMEL_MPDDRC_CR_DIS_DLL | 111 ATMEL_MPDDRC_CR_NB_8BANKS | 112 ATMEL_MPDDRC_CR_DECOD_INTERLEAVED | 113 ATMEL_MPDDRC_CR_UNAL_SUPPORTED); 114 115 ddrc->rtr = 0x511; 116 117 ddrc->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET | 118 3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET | 119 4 << ATMEL_MPDDRC_TPR0_TWR_OFFSET | 120 9 << ATMEL_MPDDRC_TPR0_TRC_OFFSET | 121 3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET | 122 4 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET | 123 4 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET | 124 4 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET); 125 126 ddrc->tpr1 = (27 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET | 127 29 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET | 128 0 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET | 129 3 << ATMEL_MPDDRC_TPR1_TXP_OFFSET); 130 131 ddrc->tpr2 = (0 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET | 132 0 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET | 133 0 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET | 134 4 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET | 135 7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET); 136 } 137 138 void mem_init(void) 139 { 140 struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; 141 struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC; 142 struct atmel_mpddrc_config ddrc_config; 143 u32 reg; 144 145 ddrc_conf(&ddrc_config); 146 147 at91_periph_clk_enable(ATMEL_ID_MPDDRC); 148 writel(AT91_PMC_DDR, &pmc->scer); 149 150 reg = readl(&mpddrc->io_calibr); 151 reg &= ~ATMEL_MPDDRC_IO_CALIBR_RDIV; 152 reg |= ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_55; 153 reg &= ~ATMEL_MPDDRC_IO_CALIBR_TZQIO; 154 reg |= ATMEL_MPDDRC_IO_CALIBR_TZQIO_(100); 155 writel(reg, &mpddrc->io_calibr); 156 157 writel(ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_TWO_CYCLE, 158 &mpddrc->rd_data_path); 159 160 ddr3_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddrc_config); 161 162 writel(0x3, &mpddrc->cal_mr4); 163 writel(64, &mpddrc->tim_cal); 164 } 165 166 void at91_pmc_init(void) 167 { 168 struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; 169 u32 tmp; 170 171 /* 172 * while coming from the ROM code, we run on PLLA @ 492 MHz / 164 MHz 173 * so we need to slow down and configure MCKR accordingly. 174 * This is why we have a special flavor of the switching function. 175 */ 176 tmp = AT91_PMC_MCKR_PLLADIV_2 | 177 AT91_PMC_MCKR_MDIV_3 | 178 AT91_PMC_MCKR_CSS_MAIN; 179 at91_mck_init_down(tmp); 180 181 tmp = AT91_PMC_PLLAR_29 | 182 AT91_PMC_PLLXR_PLLCOUNT(0x3f) | 183 AT91_PMC_PLLXR_MUL(82) | 184 AT91_PMC_PLLXR_DIV(1); 185 at91_plla_init(tmp); 186 187 writel(0x0 << 8, &pmc->pllicpr); 188 189 tmp = AT91_PMC_MCKR_H32MXDIV | 190 AT91_PMC_MCKR_PLLADIV_2 | 191 AT91_PMC_MCKR_MDIV_3 | 192 AT91_PMC_MCKR_CSS_PLLA; 193 at91_mck_init(tmp); 194 } 195 #endif 196