1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian.pop@leadtechdesign.com> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 #include <common.h> 26 #include <asm/arch/at91sam9rl.h> 27 #include <asm/arch/at91sam9rl_matrix.h> 28 #include <asm/arch/at91sam9_smc.h> 29 #include <asm/arch/at91_pmc.h> 30 #include <asm/arch/at91_rstc.h> 31 #include <asm/arch/gpio.h> 32 #include <asm/arch/io.h> 33 #include <lcd.h> 34 #include <atmel_lcdc.h> 35 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) 36 #include <net.h> 37 #endif 38 39 DECLARE_GLOBAL_DATA_PTR; 40 41 /* ------------------------------------------------------------------------- */ 42 /* 43 * Miscelaneous platform dependent initialisations 44 */ 45 46 static void at91sam9rlek_serial_hw_init(void) 47 { 48 #ifdef CONFIG_USART0 49 at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */ 50 at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ 51 at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); 52 #endif 53 54 #ifdef CONFIG_USART1 55 at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */ 56 at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */ 57 at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); 58 #endif 59 60 #ifdef CONFIG_USART2 61 at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */ 62 at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */ 63 at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); 64 #endif 65 66 #ifdef CONFIG_USART3 /* DBGU */ 67 at91_set_A_periph(AT91_PIN_PA21, 0); /* DRXD */ 68 at91_set_A_periph(AT91_PIN_PA22, 1); /* DTXD */ 69 at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); 70 #endif 71 } 72 73 #ifdef CONFIG_CMD_NAND 74 static void at91sam9rlek_nand_hw_init(void) 75 { 76 unsigned long csa; 77 78 /* Enable CS3 */ 79 csa = at91_sys_read(AT91_MATRIX_EBICSA); 80 at91_sys_write(AT91_MATRIX_EBICSA, 81 csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); 82 83 /* Configure SMC CS3 for NAND/SmartMedia */ 84 at91_sys_write(AT91_SMC_SETUP(3), 85 AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | 86 AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); 87 at91_sys_write(AT91_SMC_PULSE(3), 88 AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | 89 AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); 90 at91_sys_write(AT91_SMC_CYCLE(3), 91 AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); 92 at91_sys_write(AT91_SMC_MODE(3), 93 AT91_SMC_READMODE | AT91_SMC_WRITEMODE | 94 AT91_SMC_EXNWMODE_DISABLE | 95 #ifdef CONFIG_SYS_NAND_DBW_16 96 AT91_SMC_DBW_16 | 97 #else /* CONFIG_SYS_NAND_DBW_8 */ 98 AT91_SMC_DBW_8 | 99 #endif 100 AT91_SMC_TDF_(2)); 101 102 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD); 103 104 /* Configure RDY/BSY */ 105 at91_set_gpio_input(AT91_PIN_PD17, 1); 106 107 /* Enable NandFlash */ 108 at91_set_gpio_output(AT91_PIN_PB6, 1); 109 110 at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */ 111 at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */ 112 } 113 #endif 114 115 #ifdef CONFIG_HAS_DATAFLASH 116 static void at91sam9rlek_spi_hw_init(void) 117 { 118 at91_set_A_periph(AT91_PIN_PA28, 0); /* SPI0_NPCS0 */ 119 120 at91_set_A_periph(AT91_PIN_PA25, 0); /* SPI0_MISO */ 121 at91_set_A_periph(AT91_PIN_PA26, 0); /* SPI0_MOSI */ 122 at91_set_A_periph(AT91_PIN_PA27, 0); /* SPI0_SPCK */ 123 124 /* Enable clock */ 125 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_SPI); 126 } 127 #endif 128 129 #ifdef CONFIG_LCD 130 vidinfo_t panel_info = { 131 vl_col: 240, 132 vl_row: 320, 133 vl_clk: 4965000, 134 vl_sync: ATMEL_LCDC_INVLINE_INVERTED | 135 ATMEL_LCDC_INVFRAME_INVERTED, 136 vl_bpix: 3, 137 vl_tft: 1, 138 vl_hsync_len: 5, 139 vl_left_margin: 1, 140 vl_right_margin:33, 141 vl_vsync_len: 1, 142 vl_upper_margin:1, 143 vl_lower_margin:0, 144 mmio: AT91SAM9RL_LCDC_BASE, 145 }; 146 147 void lcd_enable(void) 148 { 149 at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */ 150 } 151 152 void lcd_disable(void) 153 { 154 at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */ 155 } 156 static void at91sam9rlek_lcd_hw_init(void) 157 { 158 at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */ 159 at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */ 160 at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */ 161 at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDDEN */ 162 at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDCC */ 163 at91_set_B_periph(AT91_PIN_PC9, 0); /* LCDD3 */ 164 at91_set_B_periph(AT91_PIN_PC10, 0); /* LCDD4 */ 165 at91_set_B_periph(AT91_PIN_PC11, 0); /* LCDD5 */ 166 at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD6 */ 167 at91_set_B_periph(AT91_PIN_PC13, 0); /* LCDD7 */ 168 at91_set_B_periph(AT91_PIN_PC15, 0); /* LCDD11 */ 169 at91_set_B_periph(AT91_PIN_PC16, 0); /* LCDD12 */ 170 at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD13 */ 171 at91_set_B_periph(AT91_PIN_PC18, 0); /* LCDD14 */ 172 at91_set_B_periph(AT91_PIN_PC19, 0); /* LCDD15 */ 173 at91_set_B_periph(AT91_PIN_PC20, 0); /* LCDD18 */ 174 at91_set_B_periph(AT91_PIN_PC21, 0); /* LCDD19 */ 175 at91_set_B_periph(AT91_PIN_PC22, 0); /* LCDD20 */ 176 at91_set_B_periph(AT91_PIN_PC23, 0); /* LCDD21 */ 177 at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */ 178 at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */ 179 180 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_LCDC); 181 182 gd->fb_base = 0; 183 } 184 #endif 185 186 187 int board_init(void) 188 { 189 /* Enable Ctrlc */ 190 console_init_f(); 191 192 /* arch number of AT91SAM9RLEK-Board */ 193 gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9RLEK; 194 /* adress of boot parameters */ 195 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 196 197 at91sam9rlek_serial_hw_init(); 198 #ifdef CONFIG_CMD_NAND 199 at91sam9rlek_nand_hw_init(); 200 #endif 201 #ifdef CONFIG_HAS_DATAFLASH 202 at91sam9rlek_spi_hw_init(); 203 #endif 204 #ifdef CONFIG_LCD 205 at91sam9rlek_lcd_hw_init(); 206 #endif 207 return 0; 208 } 209 210 int dram_init(void) 211 { 212 gd->bd->bi_dram[0].start = PHYS_SDRAM; 213 gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; 214 return 0; 215 } 216