1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian.pop@leadtechdesign.com> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 #include <common.h> 26 #include <asm/sizes.h> 27 #include <asm/arch/at91sam9g45.h> 28 #include <asm/arch/at91sam9_matrix.h> 29 #include <asm/arch/at91sam9_smc.h> 30 #include <asm/arch/at91_common.h> 31 #include <asm/arch/at91_pmc.h> 32 #include <asm/arch/at91_rstc.h> 33 #include <asm/arch/clk.h> 34 #include <asm/arch/gpio.h> 35 #include <asm/arch/io.h> 36 #include <asm/arch/hardware.h> 37 #include <lcd.h> 38 #include <atmel_lcdc.h> 39 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) 40 #include <net.h> 41 #endif 42 #include <netdev.h> 43 44 DECLARE_GLOBAL_DATA_PTR; 45 46 /* ------------------------------------------------------------------------- */ 47 /* 48 * Miscelaneous platform dependent initialisations 49 */ 50 51 #ifdef CONFIG_CMD_NAND 52 static void at91sam9m10g45ek_nand_hw_init(void) 53 { 54 unsigned long csa; 55 56 /* Enable CS3 */ 57 csa = at91_sys_read(AT91_MATRIX_EBICSA); 58 at91_sys_write(AT91_MATRIX_EBICSA, 59 csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); 60 61 /* Configure SMC CS3 for NAND/SmartMedia */ 62 at91_sys_write(AT91_SMC_SETUP(3), 63 AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | 64 AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); 65 at91_sys_write(AT91_SMC_PULSE(3), 66 AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) | 67 AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(2)); 68 at91_sys_write(AT91_SMC_CYCLE(3), 69 AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(4)); 70 at91_sys_write(AT91_SMC_MODE(3), 71 AT91_SMC_READMODE | AT91_SMC_WRITEMODE | 72 AT91_SMC_EXNWMODE_DISABLE | 73 #ifdef CONFIG_SYS_NAND_DBW_16 74 AT91_SMC_DBW_16 | 75 #else /* CONFIG_SYS_NAND_DBW_8 */ 76 AT91_SMC_DBW_8 | 77 #endif 78 AT91_SMC_TDF_(3)); 79 80 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIOC); 81 82 /* Configure RDY/BSY */ 83 at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); 84 85 /* Enable NandFlash */ 86 at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); 87 } 88 #endif 89 90 #ifdef CONFIG_MACB 91 static void at91sam9m10g45ek_macb_hw_init(void) 92 { 93 unsigned long rstc; 94 95 /* Enable clock */ 96 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_EMAC); 97 98 /* 99 * Disable pull-up on: 100 * RXDV (PA15) => PHY normal mode (not Test mode) 101 * ERX0 (PA12) => PHY ADDR0 102 * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0 103 * 104 * PHY has internal pull-down 105 */ 106 writel(pin_to_mask(AT91_PIN_PA15) | 107 pin_to_mask(AT91_PIN_PA12) | 108 pin_to_mask(AT91_PIN_PA13), 109 pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); 110 111 rstc = at91_sys_read(AT91_RSTC_MR); 112 113 /* Need to reset PHY -> 500ms reset */ 114 at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | 115 (AT91_RSTC_ERSTL & (0x0D << 8)) | 116 AT91_RSTC_URSTEN); 117 118 at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); 119 120 /* Wait for end hardware reset */ 121 while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); 122 123 /* Restore NRST value */ 124 at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | 125 (rstc) | 126 AT91_RSTC_URSTEN); 127 128 /* Re-enable pull-up */ 129 writel(pin_to_mask(AT91_PIN_PA15) | 130 pin_to_mask(AT91_PIN_PA12) | 131 pin_to_mask(AT91_PIN_PA13), 132 pin_to_controller(AT91_PIN_PA0) + PIO_PUER); 133 134 at91_macb_hw_init(); 135 } 136 #endif 137 138 #ifdef CONFIG_LCD 139 140 vidinfo_t panel_info = { 141 vl_col: 480, 142 vl_row: 272, 143 vl_clk: 9000000, 144 vl_sync: ATMEL_LCDC_INVLINE_NORMAL | 145 ATMEL_LCDC_INVFRAME_NORMAL, 146 vl_bpix: 3, 147 vl_tft: 1, 148 vl_hsync_len: 45, 149 vl_left_margin: 1, 150 vl_right_margin:1, 151 vl_vsync_len: 1, 152 vl_upper_margin:40, 153 vl_lower_margin:1, 154 mmio: AT91SAM9G45_LCDC_BASE, 155 }; 156 157 158 void lcd_enable(void) 159 { 160 at91_set_A_periph(AT91_PIN_PE6, 1); /* power up */ 161 } 162 163 void lcd_disable(void) 164 { 165 at91_set_A_periph(AT91_PIN_PE6, 0); /* power down */ 166 } 167 168 static void at91sam9m10g45ek_lcd_hw_init(void) 169 { 170 at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */ 171 at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */ 172 at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */ 173 at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */ 174 at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */ 175 176 at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */ 177 at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */ 178 at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */ 179 at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */ 180 at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */ 181 at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */ 182 at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */ 183 at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */ 184 at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */ 185 at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */ 186 at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */ 187 at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */ 188 at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */ 189 at91_set_B_periph(AT91_PIN_PE20, 0); /* LCDD13 */ 190 at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */ 191 at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */ 192 at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */ 193 at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */ 194 at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */ 195 at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */ 196 at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */ 197 at91_set_B_periph(AT91_PIN_PE28, 0); /* LCDD21 */ 198 at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */ 199 at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */ 200 201 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_LCDC); 202 203 gd->fb_base = CONFIG_AT91SAM9G45_LCD_BASE; 204 } 205 206 #ifdef CONFIG_LCD_INFO 207 #include <nand.h> 208 #include <version.h> 209 210 void lcd_show_board_info(void) 211 { 212 ulong dram_size, nand_size; 213 int i; 214 char temp[32]; 215 216 lcd_printf ("%s\n", U_BOOT_VERSION); 217 lcd_printf ("(C) 2008 ATMEL Corp\n"); 218 lcd_printf ("at91support@atmel.com\n"); 219 lcd_printf ("%s CPU at %s MHz\n", 220 AT91_CPU_NAME, 221 strmhz(temp, get_cpu_clk_rate())); 222 223 dram_size = 0; 224 for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) 225 dram_size += gd->bd->bi_dram[i].size; 226 nand_size = 0; 227 for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) 228 nand_size += nand_info[i].size; 229 lcd_printf (" %ld MB SDRAM, %ld MB NAND\n", 230 dram_size >> 20, 231 nand_size >> 20 ); 232 } 233 #endif /* CONFIG_LCD_INFO */ 234 #endif 235 236 int board_init(void) 237 { 238 /* Enable Ctrlc */ 239 console_init_f(); 240 241 /* arch number of AT91SAM9M10G45EK-Board */ 242 #ifdef CONFIG_AT91SAM9M10G45EK 243 gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9M10G45EK; 244 #elif defined CONFIG_AT91SAM9G45EKES 245 gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G45EKES; 246 #endif 247 /* adress of boot parameters */ 248 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 249 250 at91_serial_hw_init(); 251 #ifdef CONFIG_CMD_NAND 252 at91sam9m10g45ek_nand_hw_init(); 253 #endif 254 #ifdef CONFIG_HAS_DATAFLASH 255 at91_spi0_hw_init(1 << 0); 256 #endif 257 #ifdef CONFIG_ATMEL_SPI 258 at91_spi0_hw_init(1 << 4); 259 #endif 260 261 #ifdef CONFIG_MACB 262 at91sam9m10g45ek_macb_hw_init(); 263 #endif 264 265 #ifdef CONFIG_LCD 266 at91sam9m10g45ek_lcd_hw_init(); 267 #endif 268 return 0; 269 } 270 271 int dram_init(void) 272 { 273 gd->bd->bi_dram[0].start = PHYS_SDRAM; 274 gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; 275 return 0; 276 } 277 278 #ifdef CONFIG_RESET_PHY_R 279 void reset_phy(void) 280 { 281 #ifdef CONFIG_MACB 282 /* 283 * Initialize ethernet HW addr prior to starting Linux, 284 * needed for nfsroot 285 */ 286 eth_init(gd->bd); 287 #endif 288 } 289 #endif 290 291 int board_eth_init(bd_t *bis) 292 { 293 int rc = 0; 294 #ifdef CONFIG_MACB 295 rc = macb_eth_initialize(0, (void *)AT91SAM9G45_BASE_EMAC, 0x00); 296 #endif 297 return rc; 298 } 299 300 /* SPI chip select control */ 301 #ifdef CONFIG_ATMEL_SPI 302 #include <spi.h> 303 304 int spi_cs_is_valid(unsigned int bus, unsigned int cs) 305 { 306 return bus == 0 && cs < 2; 307 } 308 309 void spi_cs_activate(struct spi_slave *slave) 310 { 311 switch(slave->cs) { 312 case 1: 313 at91_set_gpio_output(AT91_PIN_PB18, 0); 314 break; 315 case 0: 316 default: 317 at91_set_gpio_output(AT91_PIN_PB3, 0); 318 break; 319 } 320 } 321 322 void spi_cs_deactivate(struct spi_slave *slave) 323 { 324 switch(slave->cs) { 325 case 1: 326 at91_set_gpio_output(AT91_PIN_PB18, 1); 327 break; 328 case 0: 329 default: 330 at91_set_gpio_output(AT91_PIN_PB3, 1); 331 break; 332 } 333 } 334 #endif /* CONFIG_ATMEL_SPI */ 335