1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian.pop@leadtechdesign.com> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 #include <common.h> 26 #include <asm/sizes.h> 27 #include <asm/arch/at91sam9263.h> 28 #include <asm/arch/at91sam9263_matrix.h> 29 #include <asm/arch/at91sam9_smc.h> 30 #include <asm/arch/at91_pmc.h> 31 #include <asm/arch/at91_rstc.h> 32 #include <asm/arch/gpio.h> 33 #include <asm/arch/io.h> 34 #include <asm/arch/hardware.h> 35 #include <lcd.h> 36 #include <atmel_lcdc.h> 37 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) 38 #include <net.h> 39 #endif 40 #include <netdev.h> 41 42 DECLARE_GLOBAL_DATA_PTR; 43 44 /* ------------------------------------------------------------------------- */ 45 /* 46 * Miscelaneous platform dependent initialisations 47 */ 48 49 static void at91sam9263ek_serial_hw_init(void) 50 { 51 #ifdef CONFIG_USART0 52 at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */ 53 at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */ 54 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US0); 55 #endif 56 57 #ifdef CONFIG_USART1 58 at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ 59 at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ 60 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US1); 61 #endif 62 63 #ifdef CONFIG_USART2 64 at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ 65 at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ 66 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US2); 67 #endif 68 69 #ifdef CONFIG_USART3 /* DBGU */ 70 at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ 71 at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ 72 at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); 73 #endif 74 } 75 76 #ifdef CONFIG_CMD_NAND 77 static void at91sam9263ek_nand_hw_init(void) 78 { 79 unsigned long csa; 80 81 /* Enable CS3 */ 82 csa = at91_sys_read(AT91_MATRIX_EBI0CSA); 83 at91_sys_write(AT91_MATRIX_EBI0CSA, 84 csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); 85 86 /* Configure SMC CS3 for NAND/SmartMedia */ 87 at91_sys_write(AT91_SMC_SETUP(3), 88 AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | 89 AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); 90 at91_sys_write(AT91_SMC_PULSE(3), 91 AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | 92 AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); 93 at91_sys_write(AT91_SMC_CYCLE(3), 94 AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); 95 at91_sys_write(AT91_SMC_MODE(3), 96 AT91_SMC_READMODE | AT91_SMC_WRITEMODE | 97 AT91_SMC_EXNWMODE_DISABLE | 98 #ifdef CONFIG_SYS_NAND_DBW_16 99 AT91_SMC_DBW_16 | 100 #else /* CONFIG_SYS_NAND_DBW_8 */ 101 AT91_SMC_DBW_8 | 102 #endif 103 AT91_SMC_TDF_(2)); 104 105 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOA | 106 1 << AT91SAM9263_ID_PIOCDE); 107 108 /* Configure RDY/BSY */ 109 at91_set_gpio_input(AT91_PIN_PA22, 1); 110 111 /* Enable NandFlash */ 112 at91_set_gpio_output(AT91_PIN_PD15, 1); 113 } 114 #endif 115 116 #ifdef CONFIG_HAS_DATAFLASH 117 static void at91sam9263ek_spi_hw_init(void) 118 { 119 at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */ 120 121 at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ 122 at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ 123 at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ 124 125 /* Enable clock */ 126 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI0); 127 } 128 #endif 129 130 #ifdef CONFIG_MACB 131 static void at91sam9263ek_macb_hw_init(void) 132 { 133 /* Enable clock */ 134 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC); 135 136 /* 137 * Disable pull-up on: 138 * RXDV (PC25) => PHY normal mode (not Test mode) 139 * ERX0 (PE25) => PHY ADDR0 140 * ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0 141 * 142 * PHY has internal pull-down 143 */ 144 writel(pin_to_mask(AT91_PIN_PC25), 145 pin_to_controller(AT91_PIN_PC0) + PIO_PUDR); 146 writel(pin_to_mask(AT91_PIN_PE25) | 147 pin_to_mask(AT91_PIN_PE26), 148 pin_to_controller(AT91_PIN_PE0) + PIO_PUDR); 149 150 /* Need to reset PHY -> 500ms reset */ 151 at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | 152 (AT91_RSTC_ERSTL & (0x0D << 8)) | 153 AT91_RSTC_URSTEN); 154 155 at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); 156 157 /* Wait for end hardware reset */ 158 while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); 159 160 /* Restore NRST value */ 161 at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | 162 (AT91_RSTC_ERSTL & (0x0 << 8)) | 163 AT91_RSTC_URSTEN); 164 165 /* Re-enable pull-up */ 166 writel(pin_to_mask(AT91_PIN_PC25), 167 pin_to_controller(AT91_PIN_PC0) + PIO_PUER); 168 writel(pin_to_mask(AT91_PIN_PE25) | 169 pin_to_mask(AT91_PIN_PE26), 170 pin_to_controller(AT91_PIN_PE0) + PIO_PUER); 171 172 at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */ 173 at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */ 174 at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */ 175 at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */ 176 at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */ 177 at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */ 178 at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */ 179 at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */ 180 at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */ 181 at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */ 182 183 #ifndef CONFIG_RMII 184 at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */ 185 at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ 186 at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ 187 at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ 188 at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ 189 at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ 190 at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ 191 at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ 192 #endif 193 194 } 195 #endif 196 197 #ifdef CONFIG_USB_OHCI_NEW 198 static void at91sam9263ek_uhp_hw_init(void) 199 { 200 /* Enable VBus on UHP ports */ 201 at91_set_gpio_output(AT91_PIN_PA21, 0); 202 at91_set_gpio_output(AT91_PIN_PA24, 0); 203 } 204 #endif 205 206 #ifdef CONFIG_LCD 207 vidinfo_t panel_info = { 208 vl_col: 240, 209 vl_row: 320, 210 vl_clk: 4965000, 211 vl_sync: ATMEL_LCDC_INVLINE_INVERTED | 212 ATMEL_LCDC_INVFRAME_INVERTED, 213 vl_bpix: 3, 214 vl_tft: 1, 215 vl_hsync_len: 5, 216 vl_left_margin: 1, 217 vl_right_margin:33, 218 vl_vsync_len: 1, 219 vl_upper_margin:1, 220 vl_lower_margin:0, 221 mmio: AT91SAM9263_LCDC_BASE, 222 }; 223 224 void lcd_enable(void) 225 { 226 at91_set_gpio_value(AT91_PIN_PA30, 1); /* power up */ 227 } 228 229 void lcd_disable(void) 230 { 231 at91_set_gpio_value(AT91_PIN_PA30, 0); /* power down */ 232 } 233 234 static void at91sam9263ek_lcd_hw_init(void) 235 { 236 at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ 237 at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ 238 at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ 239 at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ 240 at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ 241 at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ 242 at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ 243 at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ 244 at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ 245 at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ 246 at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ 247 at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ 248 at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ 249 at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */ 250 at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ 251 at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ 252 at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ 253 at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ 254 at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ 255 at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */ 256 at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ 257 at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ 258 259 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC); 260 261 gd->fb_base = AT91SAM9263_SRAM0_BASE; 262 } 263 264 #ifdef CONFIG_LCD_INFO 265 #include <nand.h> 266 #include <version.h> 267 268 void lcd_show_board_info(void) 269 { 270 ulong dram_size, nand_size; 271 int i; 272 char temp[32]; 273 274 lcd_printf ("%s\n", U_BOOT_VERSION); 275 lcd_printf ("(C) 2008 ATMEL Corp\n"); 276 lcd_printf ("at91support@atmel.com\n"); 277 lcd_printf ("%s CPU at %s MHz\n", 278 AT91_CPU_NAME, 279 strmhz(temp, AT91_CPU_CLOCK)); 280 281 dram_size = 0; 282 for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) 283 dram_size += gd->bd->bi_dram[i].size; 284 nand_size = 0; 285 for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) 286 nand_size += nand_info[i].size; 287 lcd_printf (" %ld MB SDRAM, %ld MB NAND\n", 288 dram_size >> 20, 289 nand_size >> 20 ); 290 } 291 #endif /* CONFIG_LCD_INFO */ 292 #endif 293 294 int board_init(void) 295 { 296 /* Enable Ctrlc */ 297 console_init_f(); 298 299 /* arch number of AT91SAM9263EK-Board */ 300 gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9263EK; 301 /* adress of boot parameters */ 302 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 303 304 at91sam9263ek_serial_hw_init(); 305 #ifdef CONFIG_CMD_NAND 306 at91sam9263ek_nand_hw_init(); 307 #endif 308 #ifdef CONFIG_HAS_DATAFLASH 309 at91sam9263ek_spi_hw_init(); 310 #endif 311 #ifdef CONFIG_MACB 312 at91sam9263ek_macb_hw_init(); 313 #endif 314 #ifdef CONFIG_USB_OHCI_NEW 315 at91sam9263ek_uhp_hw_init(); 316 #endif 317 #ifdef CONFIG_LCD 318 at91sam9263ek_lcd_hw_init(); 319 #endif 320 return 0; 321 } 322 323 int dram_init(void) 324 { 325 gd->bd->bi_dram[0].start = PHYS_SDRAM; 326 gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; 327 return 0; 328 } 329 330 #ifdef CONFIG_RESET_PHY_R 331 void reset_phy(void) 332 { 333 #ifdef CONFIG_MACB 334 /* 335 * Initialize ethernet HW addr prior to starting Linux, 336 * needed for nfsroot 337 */ 338 eth_init(gd->bd); 339 #endif 340 } 341 #endif 342 343 int board_eth_init(bd_t *bis) 344 { 345 int rc = 0; 346 #ifdef CONFIG_MACB 347 rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x00); 348 #endif 349 return rc; 350 } 351