1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian@popies.net> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 #include <common.h> 26 #include <asm/sizes.h> 27 #include <asm/arch/at91sam9263.h> 28 #include <asm/arch/at91sam9_smc.h> 29 #include <asm/arch/at91_common.h> 30 #include <asm/arch/at91_pmc.h> 31 #include <asm/arch/at91_rstc.h> 32 #include <asm/arch/at91_matrix.h> 33 #include <asm/arch/at91_pio.h> 34 #include <asm/arch/clk.h> 35 #include <asm/io.h> 36 #include <asm/arch/gpio.h> 37 #include <asm/arch/hardware.h> 38 #include <lcd.h> 39 #include <atmel_lcdc.h> 40 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) 41 #include <net.h> 42 #endif 43 #include <netdev.h> 44 45 DECLARE_GLOBAL_DATA_PTR; 46 47 /* ------------------------------------------------------------------------- */ 48 /* 49 * Miscelaneous platform dependent initialisations 50 */ 51 52 #ifdef CONFIG_CMD_NAND 53 static void at91sam9263ek_nand_hw_init(void) 54 { 55 unsigned long csa; 56 at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0; 57 at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX; 58 at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; 59 60 /* Enable CS3 */ 61 csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A; 62 writel(csa, &matrix->csa[0]); 63 64 /* Enable CS3 */ 65 66 /* Configure SMC CS3 for NAND/SmartMedia */ 67 writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | 68 AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), 69 &smc->cs[3].setup); 70 71 writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | 72 AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), 73 &smc->cs[3].pulse); 74 75 writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), 76 &smc->cs[3].cycle); 77 writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | 78 AT91_SMC_MODE_EXNW_DISABLE | 79 #ifdef CONFIG_SYS_NAND_DBW_16 80 AT91_SMC_MODE_DBW_16 | 81 #else /* CONFIG_SYS_NAND_DBW_8 */ 82 AT91_SMC_MODE_DBW_8 | 83 #endif 84 AT91_SMC_MODE_TDF_CYCLE(2), 85 &smc->cs[3].mode); 86 87 writel(1 << ATMEL_ID_PIOA | 1 << ATMEL_ID_PIOCDE, 88 &pmc->pcer); 89 90 /* Configure RDY/BSY */ 91 at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); 92 93 /* Enable NandFlash */ 94 at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); 95 } 96 #endif 97 98 #ifdef CONFIG_MACB 99 static void at91sam9263ek_macb_hw_init(void) 100 { 101 unsigned long erstl; 102 at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; 103 at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; 104 at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC; 105 /* Enable clock */ 106 writel(1 << ATMEL_ID_EMAC, &pmc->pcer); 107 108 /* 109 * Disable pull-up on: 110 * RXDV (PC25) => PHY normal mode (not Test mode) 111 * ERX0 (PE25) => PHY ADDR0 112 * ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0 113 * 114 * PHY has internal pull-down 115 */ 116 117 writel(1 << 25, &pio->pioc.pudr); 118 writel((1 << 25) | (1 <<26), &pio->pioe.pudr); 119 120 erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; 121 122 /* Need to reset PHY -> 500ms reset */ 123 writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) | 124 AT91_RSTC_MR_URSTEN, &rstc->mr); 125 126 writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); 127 /* Wait for end hardware reset */ 128 while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) 129 ; 130 131 /* Restore NRST value */ 132 writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr); 133 134 /* Re-enable pull-up */ 135 writel(1 << 25, &pio->pioc.puer); 136 writel((1 << 25) | (1 <<26), &pio->pioe.puer); 137 138 at91_macb_hw_init(); 139 } 140 #endif 141 142 #ifdef CONFIG_LCD 143 vidinfo_t panel_info = { 144 vl_col: 240, 145 vl_row: 320, 146 vl_clk: 4965000, 147 vl_sync: ATMEL_LCDC_INVLINE_INVERTED | 148 ATMEL_LCDC_INVFRAME_INVERTED, 149 vl_bpix: 3, 150 vl_tft: 1, 151 vl_hsync_len: 5, 152 vl_left_margin: 1, 153 vl_right_margin:33, 154 vl_vsync_len: 1, 155 vl_upper_margin:1, 156 vl_lower_margin:0, 157 mmio: ATMEL_BASE_LCDC, 158 }; 159 160 void lcd_enable(void) 161 { 162 at91_set_pio_value(AT91_PIO_PORTA, 30, 1); /* power up */ 163 } 164 165 void lcd_disable(void) 166 { 167 at91_set_pio_value(AT91_PIO_PORTA, 30, 0); /* power down */ 168 } 169 170 static void at91sam9263ek_lcd_hw_init(void) 171 { 172 at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; 173 174 at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */ 175 at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */ 176 at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDDEN */ 177 at91_set_b_periph(AT91_PIO_PORTB, 9, 0); /* LCDCC */ 178 at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD2 */ 179 at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD3 */ 180 at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD4 */ 181 at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD5 */ 182 at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD6 */ 183 at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD7 */ 184 at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD10 */ 185 at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD11 */ 186 at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD12 */ 187 at91_set_b_periph(AT91_PIO_PORTC, 12, 0); /* LCDD13 */ 188 at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD14 */ 189 at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD15 */ 190 at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD18 */ 191 at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD19 */ 192 at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDD20 */ 193 at91_set_b_periph(AT91_PIO_PORTC, 17, 0); /* LCDD21 */ 194 at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */ 195 at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */ 196 197 writel(1 << ATMEL_ID_LCDC, &pmc->pcer); 198 gd->fb_base = ATMEL_BASE_SRAM0; 199 } 200 201 #ifdef CONFIG_LCD_INFO 202 #include <nand.h> 203 #include <version.h> 204 205 #ifndef CONFIG_SYS_NO_FLASH 206 extern flash_info_t flash_info[]; 207 #endif 208 209 void lcd_show_board_info(void) 210 { 211 ulong dram_size, nand_size; 212 #ifndef CONFIG_SYS_NO_FLASH 213 ulong flash_size; 214 #endif 215 int i; 216 char temp[32]; 217 218 lcd_printf ("%s\n", U_BOOT_VERSION); 219 lcd_printf ("(C) 2008 ATMEL Corp\n"); 220 lcd_printf ("at91support@atmel.com\n"); 221 lcd_printf ("%s CPU at %s MHz\n", 222 ATMEL_CPU_NAME, 223 strmhz(temp, get_cpu_clk_rate())); 224 225 dram_size = 0; 226 for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) 227 dram_size += gd->bd->bi_dram[i].size; 228 nand_size = 0; 229 for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) 230 nand_size += nand_info[i].size; 231 #ifndef CONFIG_SYS_NO_FLASH 232 flash_size = 0; 233 for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) 234 flash_size += flash_info[i].size; 235 #endif 236 lcd_printf (" %ld MB SDRAM, %ld MB NAND", 237 dram_size >> 20, 238 nand_size >> 20 ); 239 #ifndef CONFIG_SYS_NO_FLASH 240 lcd_printf (",\n %ld MB NOR", 241 flash_size >> 20); 242 #endif 243 lcd_puts ("\n"); 244 } 245 #endif /* CONFIG_LCD_INFO */ 246 #endif 247 248 int board_early_init_f(void) 249 { 250 struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; 251 252 /* Enable clocks for all PIOs */ 253 writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | 254 (1 << ATMEL_ID_PIOCDE), 255 &pmc->pcer); 256 257 return 0; 258 } 259 260 int board_init(void) 261 { 262 /* Enable Ctrlc */ 263 console_init_f(); 264 265 /* arch number of AT91SAM9263EK-Board */ 266 gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9263EK; 267 /* adress of boot parameters */ 268 gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; 269 270 at91_seriald_hw_init(); 271 #ifdef CONFIG_CMD_NAND 272 at91sam9263ek_nand_hw_init(); 273 #endif 274 #ifdef CONFIG_HAS_DATAFLASH 275 at91_set_pio_output(AT91_PIO_PORTE, 20, 1); /* select spi0 clock */ 276 at91_spi0_hw_init(1 << 0); 277 #endif 278 #ifdef CONFIG_MACB 279 at91sam9263ek_macb_hw_init(); 280 #endif 281 #ifdef CONFIG_USB_OHCI_NEW 282 at91_uhp_hw_init(); 283 #endif 284 #ifdef CONFIG_LCD 285 at91sam9263ek_lcd_hw_init(); 286 #endif 287 return 0; 288 } 289 290 int dram_init(void) 291 { 292 gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, 293 CONFIG_SYS_SDRAM_SIZE); 294 295 return 0; 296 } 297 298 #ifdef CONFIG_RESET_PHY_R 299 void reset_phy(void) 300 { 301 } 302 #endif 303 304 int board_eth_init(bd_t *bis) 305 { 306 int rc = 0; 307 #ifdef CONFIG_MACB 308 rc = macb_eth_initialize(0, (void *) ATMEL_BASE_EMAC, 0x00); 309 #endif 310 return rc; 311 } 312