1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian.pop@leadtechdesign.com> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 #include <common.h> 26 #include <asm/arch/at91sam9260.h> 27 #include <asm/arch/at91sam9260_matrix.h> 28 #include <asm/arch/at91sam9_smc.h> 29 #include <asm/arch/at91_pmc.h> 30 #include <asm/arch/at91_rstc.h> 31 #include <asm/arch/gpio.h> 32 #include <asm/arch/io.h> 33 #include <asm/arch/hardware.h> 34 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) 35 #include <net.h> 36 #endif 37 #include <netdev.h> 38 39 DECLARE_GLOBAL_DATA_PTR; 40 41 /* ------------------------------------------------------------------------- */ 42 /* 43 * Miscelaneous platform dependent initialisations 44 */ 45 46 static void at91sam9260ek_serial_hw_init(void) 47 { 48 #ifdef CONFIG_USART0 49 at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ 50 at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ 51 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US0); 52 #endif 53 54 #ifdef CONFIG_USART1 55 at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ 56 at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ 57 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US1); 58 #endif 59 60 #ifdef CONFIG_USART2 61 at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ 62 at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ 63 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US2); 64 #endif 65 66 #ifdef CONFIG_USART3 /* DBGU */ 67 at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */ 68 at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */ 69 at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); 70 #endif 71 } 72 73 #ifdef CONFIG_CMD_NAND 74 static void at91sam9260ek_nand_hw_init(void) 75 { 76 unsigned long csa; 77 78 /* Enable CS3 */ 79 csa = at91_sys_read(AT91_MATRIX_EBICSA); 80 at91_sys_write(AT91_MATRIX_EBICSA, 81 csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); 82 83 /* Configure SMC CS3 for NAND/SmartMedia */ 84 at91_sys_write(AT91_SMC_SETUP(3), 85 AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | 86 AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); 87 at91_sys_write(AT91_SMC_PULSE(3), 88 AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | 89 AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); 90 at91_sys_write(AT91_SMC_CYCLE(3), 91 AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); 92 at91_sys_write(AT91_SMC_MODE(3), 93 AT91_SMC_READMODE | AT91_SMC_WRITEMODE | 94 AT91_SMC_EXNWMODE_DISABLE | 95 #ifdef CONFIG_SYS_NAND_DBW_16 96 AT91_SMC_DBW_16 | 97 #else /* CONFIG_SYS_NAND_DBW_8 */ 98 AT91_SMC_DBW_8 | 99 #endif 100 AT91_SMC_TDF_(2)); 101 102 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); 103 104 /* Configure RDY/BSY */ 105 at91_set_gpio_input(AT91_PIN_PC13, 1); 106 107 /* Enable NandFlash */ 108 at91_set_gpio_output(AT91_PIN_PC14, 1); 109 } 110 #endif 111 112 #ifdef CONFIG_HAS_DATAFLASH 113 static void at91sam9260ek_spi_hw_init(void) 114 { 115 at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */ 116 at91_set_B_periph(AT91_PIN_PC11, 0); /* SPI0_NPCS1 */ 117 118 at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ 119 at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ 120 at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ 121 122 /* Enable clock */ 123 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0); 124 } 125 #endif 126 127 #ifdef CONFIG_MACB 128 static void at91sam9260ek_macb_hw_init(void) 129 { 130 /* Enable clock */ 131 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC); 132 133 /* 134 * Disable pull-up on: 135 * RXDV (PA17) => PHY normal mode (not Test mode) 136 * ERX0 (PA14) => PHY ADDR0 137 * ERX1 (PA15) => PHY ADDR1 138 * ERX2 (PA25) => PHY ADDR2 139 * ERX3 (PA26) => PHY ADDR3 140 * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 141 * 142 * PHY has internal pull-down 143 */ 144 writel(pin_to_mask(AT91_PIN_PA14) | 145 pin_to_mask(AT91_PIN_PA15) | 146 pin_to_mask(AT91_PIN_PA17) | 147 pin_to_mask(AT91_PIN_PA25) | 148 pin_to_mask(AT91_PIN_PA26) | 149 pin_to_mask(AT91_PIN_PA28), 150 pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); 151 152 /* Need to reset PHY -> 500ms reset */ 153 at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | 154 (AT91_RSTC_ERSTL & (0x0D << 8)) | 155 AT91_RSTC_URSTEN); 156 157 at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); 158 159 /* Wait for end hardware reset */ 160 while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); 161 162 /* Restore NRST value */ 163 at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | 164 (AT91_RSTC_ERSTL & (0x0 << 8)) | 165 AT91_RSTC_URSTEN); 166 167 /* Re-enable pull-up */ 168 writel(pin_to_mask(AT91_PIN_PA14) | 169 pin_to_mask(AT91_PIN_PA15) | 170 pin_to_mask(AT91_PIN_PA17) | 171 pin_to_mask(AT91_PIN_PA25) | 172 pin_to_mask(AT91_PIN_PA26) | 173 pin_to_mask(AT91_PIN_PA28), 174 pin_to_controller(AT91_PIN_PA0) + PIO_PUER); 175 176 at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */ 177 at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ 178 at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */ 179 at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */ 180 at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */ 181 at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */ 182 at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */ 183 at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */ 184 at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */ 185 at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */ 186 187 #ifndef CONFIG_RMII 188 at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */ 189 at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */ 190 at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ 191 at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ 192 at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ 193 #if defined(CONFIG_AT91SAM9260EK) 194 /* 195 * use PA10, PA11 for ETX2, ETX3. 196 * PA23 and PA24 are for TWI EEPROM 197 */ 198 at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */ 199 at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */ 200 #else 201 at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */ 202 at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */ 203 #endif 204 at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ 205 #endif 206 207 } 208 #endif 209 210 int board_init(void) 211 { 212 /* Enable Ctrlc */ 213 console_init_f(); 214 215 /* arch number of AT91SAM9260EK-Board */ 216 gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK; 217 /* adress of boot parameters */ 218 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 219 220 at91sam9260ek_serial_hw_init(); 221 #ifdef CONFIG_CMD_NAND 222 at91sam9260ek_nand_hw_init(); 223 #endif 224 #ifdef CONFIG_HAS_DATAFLASH 225 at91sam9260ek_spi_hw_init(); 226 #endif 227 #ifdef CONFIG_MACB 228 at91sam9260ek_macb_hw_init(); 229 #endif 230 231 return 0; 232 } 233 234 int dram_init(void) 235 { 236 gd->bd->bi_dram[0].start = PHYS_SDRAM; 237 gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; 238 return 0; 239 } 240 241 #ifdef CONFIG_RESET_PHY_R 242 void reset_phy(void) 243 { 244 #ifdef CONFIG_MACB 245 /* 246 * Initialize ethernet HW addr prior to starting Linux, 247 * needed for nfsroot 248 */ 249 eth_init(gd->bd); 250 #endif 251 } 252 #endif 253 254 int board_eth_init(bd_t *bis) 255 { 256 int rc = 0; 257 #ifdef CONFIG_MACB 258 rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); 259 #endif 260 return rc; 261 } 262