1 /*
2  * (C) Copyright 2007-2008
3  * Stelian Pop <stelian.pop@leadtechdesign.com>
4  * Lead Tech Design <www.leadtechdesign.com>
5  *
6  * See file CREDITS for list of people who contributed to this
7  * project.
8  *
9  * This program is free software; you can redistribute it and/or
10  * modify it under the terms of the GNU General Public License as
11  * published by the Free Software Foundation; either version 2 of
12  * the License, or (at your option) any later version.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22  * MA 02111-1307 USA
23  */
24 
25 #include <common.h>
26 #include <asm/io.h>
27 #include <asm/arch/at91sam9260_matrix.h>
28 #include <asm/arch/at91sam9_smc.h>
29 #include <asm/arch/at91_common.h>
30 #include <asm/arch/at91_pmc.h>
31 #include <asm/arch/at91_rstc.h>
32 #include <asm/arch/gpio.h>
33 
34 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
35 # include <net.h>
36 #endif
37 #include <netdev.h>
38 
39 DECLARE_GLOBAL_DATA_PTR;
40 
41 /* ------------------------------------------------------------------------- */
42 /*
43  * Miscelaneous platform dependent initialisations
44  */
45 
46 #ifdef CONFIG_CMD_NAND
47 static void at91sam9260ek_nand_hw_init(void)
48 {
49 	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
50 	struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
51 	unsigned long csa;
52 
53 	/* Assign CS3 to NAND/SmartMedia Interface */
54 	csa = readl(&matrix->ebicsa);
55 	csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
56 	writel(csa, &matrix->ebicsa);
57 
58 	/* Configure SMC CS3 for NAND/SmartMedia */
59 	writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
60 		AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
61 		&smc->cs[3].setup);
62 	writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
63 		AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
64 		&smc->cs[3].pulse);
65 	writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
66 		&smc->cs[3].cycle);
67 	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
68 		AT91_SMC_MODE_EXNW_DISABLE |
69 #ifdef CONFIG_SYS_NAND_DBW_16
70 		AT91_SMC_MODE_DBW_16 |
71 #else /* CONFIG_SYS_NAND_DBW_8 */
72 		AT91_SMC_MODE_DBW_8 |
73 #endif
74 		AT91_SMC_MODE_TDF_CYCLE(2),
75 		&smc->cs[3].mode);
76 
77 	/* Configure RDY/BSY */
78 	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
79 
80 	/* Enable NandFlash */
81 	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
82 
83 }
84 #endif
85 
86 #ifdef CONFIG_MACB
87 static void at91sam9260ek_macb_hw_init(void)
88 {
89 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
90 	struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
91 	struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
92 	unsigned long erstl;
93 
94 	/* Enable EMAC clock */
95 	writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
96 
97 	/*
98 	 * Disable pull-up on:
99 	 *	RXDV (PA17) => PHY normal mode (not Test mode)
100 	 *	ERX0 (PA14) => PHY ADDR0
101 	 *	ERX1 (PA15) => PHY ADDR1
102 	 *	ERX2 (PA25) => PHY ADDR2
103 	 *	ERX3 (PA26) => PHY ADDR3
104 	 *	ECRS (PA28) => PHY ADDR4  => PHYADDR = 0x0
105 	 *
106 	 * PHY has internal pull-down
107 	 */
108 	writel(pin_to_mask(AT91_PIN_PA14) |
109 		pin_to_mask(AT91_PIN_PA15) |
110 		pin_to_mask(AT91_PIN_PA17) |
111 		pin_to_mask(AT91_PIN_PA25) |
112 		pin_to_mask(AT91_PIN_PA26) |
113 		pin_to_mask(AT91_PIN_PA28),
114 		&pioa->pudr);
115 
116 	erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
117 
118 	/* Need to reset PHY -> 500ms reset */
119 	writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
120 		AT91_RSTC_MR_URSTEN, &rstc->mr);
121 
122 	writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
123 
124 	/* Wait for end hardware reset */
125 	while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
126 		;
127 
128 	/* Restore NRST value */
129 	writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
130 		&rstc->mr);
131 
132 	/* Re-enable pull-up */
133 	writel(pin_to_mask(AT91_PIN_PA14) |
134 		pin_to_mask(AT91_PIN_PA15) |
135 		pin_to_mask(AT91_PIN_PA17) |
136 		pin_to_mask(AT91_PIN_PA25) |
137 		pin_to_mask(AT91_PIN_PA26) |
138 		pin_to_mask(AT91_PIN_PA28),
139 		&pioa->puer);
140 
141 	/* Initialize EMAC=MACB hardware */
142 	at91_macb_hw_init();
143 }
144 #endif
145 
146 int board_early_init_f(void)
147 {
148 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
149 
150 	/* Enable clocks for all PIOs */
151 	writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
152 		(1 << ATMEL_ID_PIOC),
153 		&pmc->pcer);
154 
155 	return 0;
156 }
157 
158 int board_init(void)
159 {
160 #ifdef CONFIG_AT91SAM9G20EK
161 	/* arch number of AT91SAM9260EK-Board */
162 	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK;
163 #else
164 	/* arch number of AT91SAM9260EK-Board */
165 	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK;
166 #endif
167 	/* adress of boot parameters */
168 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
169 
170 	at91_seriald_hw_init();
171 #ifdef CONFIG_CMD_NAND
172 	at91sam9260ek_nand_hw_init();
173 #endif
174 #ifdef CONFIG_HAS_DATAFLASH
175 	at91_spi0_hw_init((1 << 0) | (1 << 1));
176 #endif
177 #ifdef CONFIG_MACB
178 	at91sam9260ek_macb_hw_init();
179 #endif
180 
181 	return 0;
182 }
183 
184 int dram_init(void)
185 {
186 	gd->ram_size = get_ram_size(
187 		(void *)CONFIG_SYS_SDRAM_BASE,
188 		CONFIG_SYS_SDRAM_SIZE);
189 	return 0;
190 }
191 
192 #ifdef CONFIG_RESET_PHY_R
193 void reset_phy(void)
194 {
195 }
196 #endif
197 
198 int board_eth_init(bd_t *bis)
199 {
200 	int rc = 0;
201 #ifdef CONFIG_MACB
202 	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00);
203 #endif
204 	return rc;
205 }
206