xref: /openbmc/u-boot/board/armltd/integrator/timer.c (revision 20c700f8)
1 /*
2  * (C) Copyright 2002
3  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
4  * Marius Groeger <mgroeger@sysgo.de>
5  *
6  * (C) Copyright 2002
7  * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
8  *
9  * (C) Copyright 2003
10  * Texas Instruments, <www.ti.com>
11  * Kshitij Gupta <Kshitij@ti.com>
12  *
13  * (C) Copyright 2004
14  * ARM Ltd.
15  * Philippe Robin, <philippe.robin@arm.com>
16  *
17  * SPDX-License-Identifier:	GPL-2.0+
18  */
19 
20 #include <common.h>
21 #include <div64.h>
22 
23 #ifdef CONFIG_ARCH_CINTEGRATOR
24 #define DIV_CLOCK_INIT	1
25 #define TIMER_LOAD_VAL	0xFFFFFFFFL
26 #else
27 #define DIV_CLOCK_INIT	256
28 #define TIMER_LOAD_VAL	0x0000FFFFL
29 #endif
30 /* The Integrator/CP timer1 is clocked at 1MHz
31  * can be divided by 16 or 256
32  * and can be set up as a 32-bit timer
33  */
34 /* U-Boot expects a 32 bit timer, running at CONFIG_SYS_HZ */
35 /* Keep total timer count to avoid losing decrements < div_timer */
36 static unsigned long long total_count = 0;
37 static unsigned long long lastdec;	 /* Timer reading at last call	   */
38 /* Divisor applied to timer clock */
39 static unsigned long long div_clock = DIV_CLOCK_INIT;
40 static unsigned long long div_timer = 1; /* Divisor to convert timer reading
41 					  * change to U-Boot ticks
42 					  */
43 /* CONFIG_SYS_HZ = CONFIG_SYS_HZ_CLOCK/(div_clock * div_timer) */
44 static ulong timestamp;		/* U-Boot ticks since startup */
45 
46 #define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4))
47 
48 /* all function return values in U-Boot ticks i.e. (1/CONFIG_SYS_HZ) sec
49  *  - unless otherwise stated
50  */
51 
52 /* starts up a counter
53  * - the Integrator/CP timer can be set up to issue an interrupt */
54 int timer_init (void)
55 {
56 	/* Load timer with initial value */
57 	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0) = TIMER_LOAD_VAL;
58 #ifdef CONFIG_ARCH_CINTEGRATOR
59 	/* Set timer to be
60 	 *	enabled		 1
61 	 *	periodic	 1
62 	 *	no interrupts	 0
63 	 *	X		 0
64 	 *	divider 1	00 == less rounding error
65 	 *	32 bit		 1
66 	 *	wrapping	 0
67 	 */
68 	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x000000C2;
69 #else
70 	/* Set timer to be
71 	 *	enabled		 1
72 	 *	free-running	 0
73 	 *	XX		00
74 	 *	divider 256	10
75 	 *	XX		00
76 	 */
77 	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x00000088;
78 #endif
79 
80 	/* init the timestamp */
81 	total_count = 0ULL;
82 	/* capure current decrementer value    */
83 	lastdec	  = READ_TIMER;
84 	/* start "advancing" time stamp from 0 */
85 	timestamp = 0L;
86 
87 	div_timer = CONFIG_SYS_HZ_CLOCK;
88 	do_div(div_timer, CONFIG_SYS_HZ);
89 	do_div(div_timer, div_clock);
90 
91 	return (0);
92 }
93 
94 /*
95  * timer without interrupts
96  */
97 ulong get_timer (ulong base_ticks)
98 {
99 	return get_timer_masked () - base_ticks;
100 }
101 
102 /* delay usec useconds */
103 void __udelay (unsigned long usec)
104 {
105 	ulong tmo, tmp;
106 
107 	/* Convert to U-Boot ticks */
108 	tmo  = usec * CONFIG_SYS_HZ;
109 	tmo /= (1000000L);
110 
111 	tmp  = get_timer_masked();	/* get current timestamp */
112 	tmo += tmp;			/* form target timestamp */
113 
114 	while (get_timer_masked () < tmo) {/* loop till event */
115 		/*NOP*/;
116 	}
117 }
118 
119 /* converts the timer reading to U-Boot ticks	       */
120 /* the timestamp is the number of ticks since reset    */
121 ulong get_timer_masked (void)
122 {
123 	/* get current count */
124 	unsigned long long now = READ_TIMER;
125 
126 	if(now > lastdec) {
127 		/* Must have wrapped */
128 		total_count += lastdec + TIMER_LOAD_VAL + 1 - now;
129 	} else {
130 		total_count += lastdec - now;
131 	}
132 	lastdec	= now;
133 
134 	/* Reuse "now" */
135 	now = total_count;
136 	do_div(now, div_timer);
137 	timestamp = now;
138 
139 	return timestamp;
140 }
141 
142 /* waits specified delay value and resets timestamp */
143 void udelay_masked (unsigned long usec)
144 {
145 	udelay(usec);
146 }
147 
148 /*
149  * This function is derived from PowerPC code (read timebase as long long).
150  * On ARM it just returns the timer value.
151  */
152 unsigned long long get_ticks(void)
153 {
154 	return get_timer(0);
155 }
156 
157 /*
158  * Return the timebase clock frequency
159  * i.e. how often the timer decrements
160  */
161 ulong get_tbclk (void)
162 {
163 	unsigned long long tmp = CONFIG_SYS_HZ_CLOCK;
164 
165 	do_div(tmp, div_clock);
166 
167 	return tmp;
168 }
169