1 /* 2 * (C) Copyright 2002 3 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> 4 * Marius Groeger <mgroeger@sysgo.de> 5 * 6 * (C) Copyright 2002 7 * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> 8 * 9 * (C) Copyright 2003 10 * Texas Instruments, <www.ti.com> 11 * Kshitij Gupta <Kshitij@ti.com> 12 * 13 * (C) Copyright 2004 14 * ARM Ltd. 15 * Philippe Robin, <philippe.robin@arm.com> 16 * 17 * SPDX-License-Identifier: GPL-2.0+ 18 */ 19 20 #include <common.h> 21 #include <dm.h> 22 #include <netdev.h> 23 #include <asm/io.h> 24 #include <dm/platform_data/serial_pl01x.h> 25 #include "arm-ebi.h" 26 #include "integrator-sc.h" 27 28 DECLARE_GLOBAL_DATA_PTR; 29 30 static const struct pl01x_serial_platdata serial_platdata = { 31 .base = 0x16000000, 32 #ifdef CONFIG_ARCH_CINTEGRATOR 33 .type = TYPE_PL011, 34 .clock = 14745600, 35 #else 36 .type = TYPE_PL010, 37 .clock = 0, /* Not used for PL010 */ 38 #endif 39 }; 40 41 U_BOOT_DEVICE(integrator_serials) = { 42 .name = "serial_pl01x", 43 .platdata = &serial_platdata, 44 }; 45 46 void peripheral_power_enable (void); 47 48 #if defined(CONFIG_SHOW_BOOT_PROGRESS) 49 void show_boot_progress(int progress) 50 { 51 printf("Boot reached stage %d\n", progress); 52 } 53 #endif 54 55 #define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF) 56 57 /* 58 * Miscellaneous platform dependent initialisations 59 */ 60 61 int board_init (void) 62 { 63 u32 val; 64 65 /* arch number of Integrator Board */ 66 #ifdef CONFIG_ARCH_CINTEGRATOR 67 gd->bd->bi_arch_number = MACH_TYPE_CINTEGRATOR; 68 #else 69 gd->bd->bi_arch_number = MACH_TYPE_INTEGRATOR; 70 #endif 71 72 /* adress of boot parameters */ 73 gd->bd->bi_boot_params = 0x00000100; 74 75 #ifdef CONFIG_CM_REMAP 76 extern void cm_remap(void); 77 cm_remap(); /* remaps writeable memory to 0x00000000 */ 78 #endif 79 80 #ifdef CONFIG_ARCH_CINTEGRATOR 81 /* 82 * Flash protection on the Integrator/CP is in a simple register 83 */ 84 val = readl(CP_FLASHPROG); 85 val |= (CP_FLASHPROG_FLVPPEN | CP_FLASHPROG_FLWREN); 86 writel(val, CP_FLASHPROG); 87 #else 88 /* 89 * The Integrator/AP has some special protection mechanisms 90 * for the external memories, first the External Bus Interface (EBI) 91 * then the system controller (SC). 92 * 93 * The system comes up with the flash memory non-writable and 94 * configuration locked. If we want U-Boot to be used for flash 95 * access we cannot have the flash memory locked. 96 */ 97 writel(EBI_UNLOCK_MAGIC, EBI_BASE + EBI_LOCK_REG); 98 val = readl(EBI_BASE + EBI_CSR1_REG); 99 val &= EBI_CSR_WREN_MASK; 100 val |= EBI_CSR_WREN_ENABLE; 101 writel(val, EBI_BASE + EBI_CSR1_REG); 102 writel(0, EBI_BASE + EBI_LOCK_REG); 103 104 /* 105 * Set up the system controller to remove write protection from 106 * the flash memory and enable Vpp 107 */ 108 writel(SC_CTRL_FLASHVPP | SC_CTRL_FLASHWP, SC_CTRLS); 109 #endif 110 111 icache_enable (); 112 113 return 0; 114 } 115 116 int misc_init_r (void) 117 { 118 setenv("verify", "n"); 119 return (0); 120 } 121 122 /* 123 * The Integrator remaps the Flash memory to 0x00000000 and executes U-Boot 124 * from there, which means we cannot test the RAM underneath the ROM at this 125 * point. It will be unmapped later on, when we are executing from the 126 * relocated in RAM U-Boot. We simply assume that this RAM is usable if the 127 * RAM on higher addresses works fine. 128 */ 129 #define REMAPPED_FLASH_SZ 0x40000 130 131 int dram_init (void) 132 { 133 gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; 134 #ifdef CONFIG_CM_SPD_DETECT 135 { 136 extern void dram_query(void); 137 u32 cm_reg_sdram; 138 u32 sdram_shift; 139 140 dram_query(); /* Assembler accesses to CM registers */ 141 /* Queries the SPD values */ 142 143 /* Obtain the SDRAM size from the CM SDRAM register */ 144 145 cm_reg_sdram = readl(CM_BASE + OS_SDRAM); 146 /* Register SDRAM size 147 * 148 * 0xXXXXXXbbb000bb 16 MB 149 * 0xXXXXXXbbb001bb 32 MB 150 * 0xXXXXXXbbb010bb 64 MB 151 * 0xXXXXXXbbb011bb 128 MB 152 * 0xXXXXXXbbb100bb 256 MB 153 * 154 */ 155 sdram_shift = ((cm_reg_sdram & 0x0000001C)/4)%4; 156 gd->ram_size = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE + 157 REMAPPED_FLASH_SZ, 158 0x01000000 << sdram_shift); 159 } 160 #else 161 gd->ram_size = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE + 162 REMAPPED_FLASH_SZ, 163 PHYS_SDRAM_1_SIZE); 164 #endif /* CM_SPD_DETECT */ 165 /* We only have one bank of RAM, set it to whatever was detected */ 166 gd->bd->bi_dram[0].size = gd->ram_size; 167 168 return 0; 169 } 170 171 #ifdef CONFIG_CMD_NET 172 int board_eth_init(bd_t *bis) 173 { 174 int rc = 0; 175 #ifdef CONFIG_SMC91111 176 rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); 177 #endif 178 rc += pci_eth_init(bis); 179 return rc; 180 } 181 #endif 182