xref: /openbmc/u-boot/board/armadeus/apf27/apf27.h (revision e11ef3d2)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org>
4  */
5 
6 #ifndef __APF27_H
7 #define __APF27_H
8 
9 /* FPGA program pin configuration */
10 #define ACFG_FPGA_PWR	(GPIO_PORTF | 19)	/* FPGA prog pin  */
11 #define ACFG_FPGA_PRG	(GPIO_PORTF | 11)	/* FPGA prog pin  */
12 #define ACFG_FPGA_CLK	(GPIO_PORTF | 15)	/* FPGA clk pin   */
13 #define ACFG_FPGA_RDATA	0xD6000000		/* FPGA data addr */
14 #define ACFG_FPGA_WDATA	0xD6000000		/* FPGA data addr */
15 #define ACFG_FPGA_INIT	(GPIO_PORTF | 12)	/* FPGA init pin  */
16 #define ACFG_FPGA_DONE	(GPIO_PORTF | 9)	/* FPGA done pin  */
17 #define ACFG_FPGA_RW	(GPIO_PORTF | 21)	/* FPGA done pin  */
18 #define ACFG_FPGA_CS	(GPIO_PORTF | 22)	/* FPGA done pin  */
19 #define ACFG_FPGA_SUSPEND (GPIO_PORTF | 10)	/* FPGA done pin  */
20 #define ACFG_FPGA_RESET	(GPIO_PORTF | 7)	/* FPGA done pin  */
21 
22 /* MMC pin */
23 #define PC_PWRON	(GPIO_PORTF | 16)
24 
25 /*
26  * MPU CLOCK source before PLL
27  * ACFG_CLK_FREQ (2/3 MPLL clock or ext 266 MHZ)
28  */
29 #define ACFG_MPCTL0_VAL		0x01EF15D5	/* 399.000 MHz */
30 #define ACFG_MPCTL1_VAL		0
31 #define CONFIG_MPLL_FREQ	399
32 
33 #define ACFG_CLK_FREQ	(CONFIG_MPLL_FREQ*2/3) /* 266 MHz */
34 
35 /* Serial clock source before PLL (should be named ACFG_SYSPLL_CLK_FREQ)*/
36 #define ACFG_SPCTL0_VAL		0x0475206F	/* 299.99937 MHz */
37 #define ACFG_SPCTL1_VAL		0
38 #define CONFIG_SPLL_FREQ	300		/* MHz */
39 
40 /* ARM bus frequency (have to be a CONFIG_MPLL_FREQ ratio) */
41 #define CONFIG_ARM_FREQ		399	/* up to 400 MHz */
42 
43 /* external bus frequency (have to be a ACFG_CLK_FREQ ratio) */
44 #define CONFIG_HCLK_FREQ	133	/* (ACFG_CLK_FREQ/2) */
45 
46 #define CONFIG_PERIF1_FREQ	16	/* 16.625 MHz UART, GPT, PWM */
47 #define CONFIG_PERIF2_FREQ	33	/* 33.25 MHz CSPI and SDHC */
48 #define CONFIG_PERIF3_FREQ	33	/* 33.25 MHz LCD */
49 #define CONFIG_PERIF4_FREQ	33	/* 33.25 MHz CSI */
50 #define CONFIG_SSI1_FREQ	66	/* 66.50 MHz SSI1 */
51 #define CONFIG_SSI2_FREQ	66	/* 66.50 MHz SSI2 */
52 #define CONFIG_MSHC_FREQ	66	/* 66.50 MHz MSHC */
53 #define CONFIG_H264_FREQ	66	/* 66.50 MHz H264 */
54 #define CONFIG_CLK0_DIV		3	/* Divide CLK0 by 4 */
55 #define CONFIG_CLK0_EN		1	/* CLK0 enabled */
56 
57 /* external bus frequency (have to be a CONFIG_HCLK_FREQ ratio) */
58 #define CONFIG_NFC_FREQ		44	/* NFC Clock up to 44 MHz wh 133MHz */
59 
60 /* external serial bus frequency (have to be a CONFIG_SPLL_FREQ ratio) */
61 #define CONFIG_USB_FREQ		60	/* 60 MHz */
62 
63 /*
64  * SDRAM
65  */
66 #if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */
67 /* micron 64MB */
68 #define ACFG_SDRAM_NUM_COL		9  /* 8, 9, 10 or 11
69 					    * column address bits
70 					    */
71 #define ACFG_SDRAM_NUM_ROW		13 /* 11, 12 or 13
72 					    * row address bits
73 					    */
74 #define ACFG_SDRAM_REFRESH		3  /* 0=OFF 1=2048
75 					    * 2=4096 3=8192 refresh
76 					    */
77 #define ACFG_SDRAM_EXIT_PWD		25 /* ns exit power
78 					    * down delay
79 					    */
80 #define ACFG_SDRAM_W2R_DELAY		1  /* write to read
81 					    * cycle delay > 0
82 					    */
83 #define ACFG_SDRAM_ROW_PRECHARGE_DELAY	18 /* ns */
84 #define ACFG_SDRAM_TMRD_DELAY		2  /* Load mode register
85 					    * cycle delay 1..4
86 					    */
87 #define ACFG_SDRAM_TWR_DELAY		1  /* LPDDR: 0=2ck 1=3ck
88 					    * SDRAM: 0=1ck 1=2ck
89 					    */
90 #define ACFG_SDRAM_RAS_DELAY		42 /* ns ACTIVE-to-PRECHARGE delay */
91 #define ACFG_SDRAM_RRD_DELAY		12 /* ns ACTIVE-to-ACTIVE delay */
92 #define ACFG_SDRAM_RCD_DELAY		18 /* ns Row to Column delay */
93 #define ACFG_SDRAM_RC_DELAY		70 /* ns Row cycle delay (tRFC
94 					    * refresh to command)
95 					    */
96 #define ACFG_SDRAM_CLOCK_CYCLE_CL_1	0 /* ns clock cycle time
97 					   * estimated fo CL=1
98 					   * 0=force 3 for lpddr
99 					   */
100 #define ACFG_SDRAM_PARTIAL_ARRAY_SR	0  /* 0=full 1=half 2=quater
101 					    * 3=Eighth 4=Sixteenth
102 					    */
103 #define ACFG_SDRAM_DRIVE_STRENGH	0  /* 0=Full-strength 1=half
104 					    * 2=quater 3=Eighth
105 					    */
106 #define ACFG_SDRAM_BURST_LENGTH		3  /* 2^N BYTES (N=0..3) */
107 #define ACFG_SDRAM_SINGLE_ACCESS	0  /* 1= single access
108 					    * 0 = Burst mode
109 					    */
110 #endif
111 
112 #if (ACFG_SDRAM_MBYTE_SYZE == 128)
113 /* micron 128MB */
114 #define ACFG_SDRAM_NUM_COL		9  /* 8, 9, 10 or 11
115 					    * column address bits
116 					    */
117 #define ACFG_SDRAM_NUM_ROW		14 /* 11, 12 or 13
118 					    * row address bits
119 					    */
120 #define ACFG_SDRAM_REFRESH		3  /* 0=OFF 1=2048
121 					    * 2=4096 3=8192 refresh
122 					    */
123 #define ACFG_SDRAM_EXIT_PWD		25 /* ns exit power
124 					    * down delay
125 					    */
126 #define ACFG_SDRAM_W2R_DELAY		1  /* write to read
127 					    * cycle delay > 0
128 					    */
129 #define ACFG_SDRAM_ROW_PRECHARGE_DELAY	18 /* ns */
130 #define ACFG_SDRAM_TMRD_DELAY		2  /* Load mode register
131 					    * cycle delay 1..4
132 					    */
133 #define ACFG_SDRAM_TWR_DELAY		1  /* LPDDR: 0=2ck 1=3ck
134 					    * SDRAM: 0=1ck 1=2ck
135 					    */
136 #define ACFG_SDRAM_RAS_DELAY		42 /* ns ACTIVE-to-PRECHARGE delay */
137 #define ACFG_SDRAM_RRD_DELAY		12 /* ns ACTIVE-to-ACTIVE delay */
138 #define ACFG_SDRAM_RCD_DELAY		18 /* ns Row to Column delay */
139 #define ACFG_SDRAM_RC_DELAY		70 /* ns Row cycle delay (tRFC
140 					    * refresh to command)
141 					    */
142 #define ACFG_SDRAM_CLOCK_CYCLE_CL_1	0 /* ns clock cycle time
143 					   * estimated fo CL=1
144 					   * 0=force 3 for lpddr
145 					   */
146 #define ACFG_SDRAM_PARTIAL_ARRAY_SR	0  /* 0=full 1=half 2=quater
147 					    * 3=Eighth 4=Sixteenth
148 					    */
149 #define ACFG_SDRAM_DRIVE_STRENGH	0  /* 0=Full-strength 1=half
150 					    * 2=quater 3=Eighth
151 					    */
152 #define ACFG_SDRAM_BURST_LENGTH		3  /* 2^N BYTES (N=0..3) */
153 #define ACFG_SDRAM_SINGLE_ACCESS	0  /* 1= single access
154 					    * 0 = Burst mode
155 					    */
156 #endif
157 
158 #if (ACFG_SDRAM_MBYTE_SYZE == 256)
159 /* micron 256MB */
160 #define ACFG_SDRAM_NUM_COL		10  /* 8, 9, 10 or 11
161 					     * column address bits
162 					     */
163 #define ACFG_SDRAM_NUM_ROW		14 /* 11, 12 or 13
164 					    * row address bits
165 					    */
166 #define ACFG_SDRAM_REFRESH		3  /* 0=OFF 1=2048
167 					    * 2=4096 3=8192 refresh
168 					    */
169 #define ACFG_SDRAM_EXIT_PWD		25 /* ns exit power
170 					    * down delay
171 					    */
172 #define ACFG_SDRAM_W2R_DELAY		1  /* write to read cycle
173 					    * delay > 0
174 					    */
175 #define ACFG_SDRAM_ROW_PRECHARGE_DELAY	18 /* ns */
176 #define ACFG_SDRAM_TMRD_DELAY		2  /* Load mode register
177 					    * cycle delay 1..4
178 					    */
179 #define ACFG_SDRAM_TWR_DELAY		1  /* LPDDR: 0=2ck 1=3ck
180 					    * SDRAM: 0=1ck 1=2ck
181 					    */
182 #define ACFG_SDRAM_RAS_DELAY		42 /* ns ACTIVE-to-PRECHARGE delay */
183 #define ACFG_SDRAM_RRD_DELAY		12 /* ns ACTIVE-to-ACTIVE delay */
184 #define ACFG_SDRAM_RCD_DELAY		18 /* ns Row to Column delay */
185 #define ACFG_SDRAM_RC_DELAY		70 /* ns Row cycle delay (tRFC
186 					    * refresh to command)
187 					    */
188 #define ACFG_SDRAM_CLOCK_CYCLE_CL_1	0 /* ns clock cycle time
189 					   * estimated fo CL=1
190 					   * 0=force 3 for lpddr
191 					   */
192 #define ACFG_SDRAM_PARTIAL_ARRAY_SR	0  /* 0=full 1=half 2=quater
193 					    * 3=Eighth 4=Sixteenth
194 					    */
195 #define ACFG_SDRAM_DRIVE_STRENGH	0  /* 0=Full-strength
196 					    * 1=half
197 					    * 2=quater
198 					    * 3=Eighth
199 					    */
200 #define ACFG_SDRAM_BURST_LENGTH		3  /* 2^N BYTES (N=0..3) */
201 #define ACFG_SDRAM_SINGLE_ACCESS	0  /* 1= single access
202 					    * 0 = Burst mode
203 					    */
204 #endif
205 
206 /*
207  * External interface
208  */
209 /*
210  * CSCRxU_VAL:
211  * 31| x | x | x x |x x x x| x x | x | x  |x x x x|16
212  *   |SP |WP | BCD |  BCS  | PSZ |PME|SYNC|  DOL  |
213  *
214  * 15| x x  | x x x x x x | x | x x x x | x x x x |0
215  *   | CNC  |     WSC     |EW |   WWS   |   EDC   |
216  *
217  * CSCRxL_VAL:
218  * 31|  x x x x  | x x x x  | x x x x  | x x x x  |16
219  *   |    OEA    |   OEN    |   EBWA   |   EBWN   |
220  * 15|x x x x| x |x x x |x x x x| x | x | x  | x  | 0
221  *   |  CSA  |EBC| DSZ  |  CSN  |PSR|CRE|WRAP|CSEN|
222  *
223  * CSCRxA_VAL:
224  * 31|  x x x x  | x x x x  | x x x x  | x x x x  |16
225  *   |   EBRA    |   EBRN   |   RWA    |   RWN    |
226  * 15| x | x x |x x x|x x|x x|x x| x | x | x  | x | 0
227  *   |MUM| LAH | LBN |LBA|DWW|DCT|WWU|AGE|CNC2|FCE|
228  */
229 
230 /* CS0 configuration for 16 bit nor flash */
231 #define ACFG_CS0U_VAL	0x0000CC03
232 #define ACFG_CS0L_VAL	0xa0330D01
233 #define ACFG_CS0A_VAL	0x00220800
234 
235 #define ACFG_CS1U_VAL	0x00000f00
236 #define ACFG_CS1L_VAL	0x00000D01
237 #define ACFG_CS1A_VAL	0
238 
239 #define ACFG_CS2U_VAL	0
240 #define ACFG_CS2L_VAL	0
241 #define ACFG_CS2A_VAL	0
242 
243 #define ACFG_CS3U_VAL	0
244 #define ACFG_CS3L_VAL	0
245 #define ACFG_CS3A_VAL	0
246 
247 #define ACFG_CS4U_VAL	0
248 #define ACFG_CS4L_VAL	0
249 #define ACFG_CS4A_VAL	0
250 
251 /* FPGA 16 bit data bus */
252 #define ACFG_CS5U_VAL	0x00000600
253 #define ACFG_CS5L_VAL	0x00000D01
254 #define ACFG_CS5A_VAL	0
255 
256 #define ACFG_EIM_VAL	0x00002200
257 
258 
259 /*
260  * FPGA specific settings
261  */
262 
263 /* CLKO */
264 #define ACFG_CCSR_VAL 0x00000305
265 /* drive strength CLKO set to 2 */
266 #define ACFG_DSCR10_VAL 0x00020000
267 /* drive strength A1..A12 set to 2 */
268 #define ACFG_DSCR3_VAL 0x02AAAAA8
269 /* drive strength ctrl */
270 #define ACFG_DSCR7_VAL 0x00020880
271 /* drive strength data */
272 #define ACFG_DSCR2_VAL 0xAAAAAAAA
273 
274 
275 /*
276  * Default configuration for GPIOs and peripherals
277  */
278 #define ACFG_DDIR_A_VAL		0x00000000
279 #define ACFG_OCR1_A_VAL		0x00000000
280 #define ACFG_OCR2_A_VAL		0x00000000
281 #define ACFG_ICFA1_A_VAL	0xFFFFFFFF
282 #define ACFG_ICFA2_A_VAL	0xFFFFFFFF
283 #define ACFG_ICFB1_A_VAL	0xFFFFFFFF
284 #define ACFG_ICFB2_A_VAL	0xFFFFFFFF
285 #define ACFG_DR_A_VAL		0x00000000
286 #define ACFG_GIUS_A_VAL		0xFFFFFFFF
287 #define ACFG_ICR1_A_VAL		0x00000000
288 #define ACFG_ICR2_A_VAL		0x00000000
289 #define ACFG_IMR_A_VAL		0x00000000
290 #define ACFG_GPR_A_VAL		0x00000000
291 #define ACFG_PUEN_A_VAL		0xFFFFFFFF
292 
293 #define ACFG_DDIR_B_VAL		0x00000000
294 #define ACFG_OCR1_B_VAL		0x00000000
295 #define ACFG_OCR2_B_VAL		0x00000000
296 #define ACFG_ICFA1_B_VAL	0xFFFFFFFF
297 #define ACFG_ICFA2_B_VAL	0xFFFFFFFF
298 #define ACFG_ICFB1_B_VAL	0xFFFFFFFF
299 #define ACFG_ICFB2_B_VAL	0xFFFFFFFF
300 #define ACFG_DR_B_VAL		0x00000000
301 #define ACFG_GIUS_B_VAL		0xFF3FFFF0
302 #define ACFG_ICR1_B_VAL		0x00000000
303 #define ACFG_ICR2_B_VAL		0x00000000
304 #define ACFG_IMR_B_VAL		0x00000000
305 #define ACFG_GPR_B_VAL		0x00000000
306 #define ACFG_PUEN_B_VAL		0xFFFFFFFF
307 
308 #define ACFG_DDIR_C_VAL		0x00000000
309 #define ACFG_OCR1_C_VAL		0x00000000
310 #define ACFG_OCR2_C_VAL		0x00000000
311 #define ACFG_ICFA1_C_VAL	0xFFFFFFFF
312 #define ACFG_ICFA2_C_VAL	0xFFFFFFFF
313 #define ACFG_ICFB1_C_VAL	0xFFFFFFFF
314 #define ACFG_ICFB2_C_VAL	0xFFFFFFFF
315 #define ACFG_DR_C_VAL		0x00000000
316 #define ACFG_GIUS_C_VAL		0xFFFFC07F
317 #define ACFG_ICR1_C_VAL		0x00000000
318 #define ACFG_ICR2_C_VAL		0x00000000
319 #define ACFG_IMR_C_VAL		0x00000000
320 #define ACFG_GPR_C_VAL		0x00000000
321 #define ACFG_PUEN_C_VAL		0xFFFFFF87
322 
323 #define ACFG_DDIR_D_VAL		0x00000000
324 #define ACFG_OCR1_D_VAL		0x00000000
325 #define ACFG_OCR2_D_VAL		0x00000000
326 #define ACFG_ICFA1_D_VAL	0xFFFFFFFF
327 #define ACFG_ICFA2_D_VAL	0xFFFFFFFF
328 #define ACFG_ICFB1_D_VAL	0xFFFFFFFF
329 #define ACFG_ICFB2_D_VAL	0xFFFFFFFF
330 #define ACFG_DR_D_VAL		0x00000000
331 #define ACFG_GIUS_D_VAL		0xFFFFFFFF
332 #define ACFG_ICR1_D_VAL		0x00000000
333 #define ACFG_ICR2_D_VAL		0x00000000
334 #define ACFG_IMR_D_VAL		0x00000000
335 #define ACFG_GPR_D_VAL		0x00000000
336 #define ACFG_PUEN_D_VAL		0xFFFFFFFF
337 
338 #define ACFG_DDIR_E_VAL		0x00000000
339 #define ACFG_OCR1_E_VAL		0x00000000
340 #define ACFG_OCR2_E_VAL		0x00000000
341 #define ACFG_ICFA1_E_VAL	0xFFFFFFFF
342 #define ACFG_ICFA2_E_VAL	0xFFFFFFFF
343 #define ACFG_ICFB1_E_VAL	0xFFFFFFFF
344 #define ACFG_ICFB2_E_VAL	0xFFFFFFFF
345 #define ACFG_DR_E_VAL		0x00000000
346 #define ACFG_GIUS_E_VAL		0xFCFFCCF8
347 #define ACFG_ICR1_E_VAL		0x00000000
348 #define ACFG_ICR2_E_VAL		0x00000000
349 #define ACFG_IMR_E_VAL		0x00000000
350 #define ACFG_GPR_E_VAL		0x00000000
351 #define ACFG_PUEN_E_VAL		0xFFFFFFFF
352 
353 #define ACFG_DDIR_F_VAL		0x00000000
354 #define ACFG_OCR1_F_VAL		0x00000000
355 #define ACFG_OCR2_F_VAL		0x00000000
356 #define ACFG_ICFA1_F_VAL	0xFFFFFFFF
357 #define ACFG_ICFA2_F_VAL	0xFFFFFFFF
358 #define ACFG_ICFB1_F_VAL	0xFFFFFFFF
359 #define ACFG_ICFB2_F_VAL	0xFFFFFFFF
360 #define ACFG_DR_F_VAL		0x00000000
361 #define ACFG_GIUS_F_VAL		0xFF7F8000
362 #define ACFG_ICR1_F_VAL		0x00000000
363 #define ACFG_ICR2_F_VAL		0x00000000
364 #define ACFG_IMR_F_VAL		0x00000000
365 #define ACFG_GPR_F_VAL		0x00000000
366 #define ACFG_PUEN_F_VAL		0xFFFFFFFF
367 
368 /* Enforce DDR signal strengh & enable USB/PP/DMA burst override bits */
369 #define ACFG_GPCR_VAL		0x0003000F
370 
371 #define ACFG_ESDMISC_VAL	ESDMISC_LHD+ESDMISC_MDDREN
372 
373 /* FMCR select num LPDDR RAMs and nand 16bits, 2KB pages */
374 #if (CONFIG_NR_DRAM_BANKS == 1)
375 #define ACFG_FMCR_VAL 0xFFFFFFF9
376 #elif (CONFIG_NR_DRAM_BANKS == 2)
377 #define ACFG_FMCR_VAL 0xFFFFFFFB
378 #endif
379 
380 #define ACFG_AIPI1_PSR0_VAL	0x20040304
381 #define ACFG_AIPI1_PSR1_VAL	0xDFFBFCFB
382 #define ACFG_AIPI2_PSR0_VAL	0x00000000
383 #define ACFG_AIPI2_PSR1_VAL	0xFFFFFFFF
384 
385 /* PCCR enable DMA FEC I2C1 IIM SDHC1 */
386 #define ACFG_PCCR0_VAL		0x05070410
387 #define ACFG_PCCR1_VAL		0xA14A0608
388 
389 /*
390  * From here, there should not be any user configuration.
391  * All Equations are automatic
392  */
393 
394 /* fixme none integer value (7.5ns) => 2*hclock = 15ns */
395 #define ACFG_2XHCLK_LGTH	(2000/CONFIG_HCLK_FREQ)	/* ns */
396 
397 /* USB 60 MHz ; ARM up to 400; HClK up to 133MHz*/
398 #define CSCR_MASK 0x0300800D
399 
400 #define ACFG_CSCR_VAL						\
401 	(CSCR_MASK						\
402 	|((((CONFIG_SPLL_FREQ/CONFIG_USB_FREQ)-1)&0x07) << 28)	\
403 	|((((CONFIG_MPLL_FREQ/CONFIG_ARM_FREQ)-1)&0x03) << 12)	\
404 	|((((ACFG_CLK_FREQ/CONFIG_HCLK_FREQ)-1)&0x03) << 8))
405 
406 /* SSIx CLKO NFC H264 MSHC */
407 #define ACFG_PCDR0_VAL\
408 	(((((ACFG_CLK_FREQ/CONFIG_MSHC_FREQ)-1)&0x3F)<<0)	\
409 	|((((CONFIG_HCLK_FREQ/CONFIG_NFC_FREQ)-1)&0x0F)<<6)	\
410 	|(((((ACFG_CLK_FREQ/CONFIG_H264_FREQ)-2)*2)&0x3F)<<10)\
411 	|(((((ACFG_CLK_FREQ/CONFIG_SSI1_FREQ)-2)*2)&0x3F)<<16)\
412 	|(((CONFIG_CLK0_DIV)&0x07)<<22)\
413 	|(((CONFIG_CLK0_EN)&0x01)<<25)\
414 	|(((((ACFG_CLK_FREQ/CONFIG_SSI2_FREQ)-2)*2)&0x3F)<<26))
415 
416 /* PERCLKx  */
417 #define ACFG_PCDR1_VAL\
418 	(((((ACFG_CLK_FREQ/CONFIG_PERIF1_FREQ)-1)&0x3F)<<0)	\
419 	|((((ACFG_CLK_FREQ/CONFIG_PERIF2_FREQ)-1)&0x3F)<<8)	\
420 	|((((ACFG_CLK_FREQ/CONFIG_PERIF3_FREQ)-1)&0x3F)<<16)	\
421 	|((((ACFG_CLK_FREQ/CONFIG_PERIF4_FREQ)-1)&0x3F)<<24))
422 
423 /* SDRAM controller programming Values */
424 #if (((2*ACFG_SDRAM_CLOCK_CYCLE_CL_1) > (3*ACFG_2XHCLK_LGTH)) || \
425 	(ACFG_SDRAM_CLOCK_CYCLE_CL_1 < 1))
426 #define REG_FIELD_SCL_VAL 3
427 #define REG_FIELD_SCLIMX_VAL 0
428 #else
429 #define REG_FIELD_SCL_VAL\
430 	((2*ACFG_SDRAM_CLOCK_CYCLE_CL_1+ACFG_2XHCLK_LGTH-1)/ \
431 		ACFG_2XHCLK_LGTH)
432 #define REG_FIELD_SCLIMX_VAL REG_FIELD_SCL_VAL
433 #endif
434 
435 #if ((2*ACFG_SDRAM_RC_DELAY) > (16*ACFG_2XHCLK_LGTH))
436 #define REG_FIELD_SRC_VAL 0
437 #else
438 #define REG_FIELD_SRC_VAL\
439 	((2*ACFG_SDRAM_RC_DELAY+ACFG_2XHCLK_LGTH-1)/ \
440 		ACFG_2XHCLK_LGTH)
441 #endif
442 
443 /* TBD Power down timer ; PRCT Bit Field Encoding; burst length 8 ; FP = 0*/
444 #define REG_ESDCTL_BASE_CONFIG (0x80020485\
445 				| (((ACFG_SDRAM_NUM_ROW-11)&0x7)<<24)\
446 				| (((ACFG_SDRAM_NUM_COL-8)&0x3)<<20)\
447 				| (((ACFG_SDRAM_REFRESH)&0x7)<<13))
448 
449 #define ACFG_NORMAL_RW_CMD	((0x0<<28)+REG_ESDCTL_BASE_CONFIG)
450 #define ACFG_PRECHARGE_CMD	((0x1<<28)+REG_ESDCTL_BASE_CONFIG)
451 #define ACFG_AUTOREFRESH_CMD	((0x2<<28)+REG_ESDCTL_BASE_CONFIG)
452 #define ACFG_SET_MODE_REG_CMD	((0x3<<28)+REG_ESDCTL_BASE_CONFIG)
453 
454 /* ESDRAMC Configuration Registers : force CL=3 to lpddr */
455 #define ACFG_SDRAM_ESDCFG_REGISTER_VAL (0x0\
456 	| (((((2*ACFG_SDRAM_EXIT_PWD+ACFG_2XHCLK_LGTH-1)/ \
457 		ACFG_2XHCLK_LGTH)-1)&0x3)<<21)\
458 	| (((ACFG_SDRAM_W2R_DELAY-1)&0x1)<<20)\
459 	| (((((2*ACFG_SDRAM_ROW_PRECHARGE_DELAY+ \
460 		ACFG_2XHCLK_LGTH-1)/ACFG_2XHCLK_LGTH)-1)&0x3)<<18) \
461 	| (((ACFG_SDRAM_TMRD_DELAY-1)&0x3)<<16)\
462 	| (((ACFG_SDRAM_TWR_DELAY)&0x1)<<15)\
463 	| (((((2*ACFG_SDRAM_RAS_DELAY+ACFG_2XHCLK_LGTH-1)/ \
464 		ACFG_2XHCLK_LGTH)-1)&0x7)<<12) \
465 	| (((((2*ACFG_SDRAM_RRD_DELAY+ACFG_2XHCLK_LGTH-1)/ \
466 		ACFG_2XHCLK_LGTH)-1)&0x3)<<10) \
467 	| (((REG_FIELD_SCLIMX_VAL)&0x3)<<8)\
468 	| (((((2*ACFG_SDRAM_RCD_DELAY+ACFG_2XHCLK_LGTH-1)/ \
469 		ACFG_2XHCLK_LGTH)-1)&0x7)<<4) \
470 	| (((REG_FIELD_SRC_VAL)&0x0F)<<0))
471 
472 /* Issue Mode register Command to SDRAM */
473 #define ACFG_SDRAM_MODE_REGISTER_VAL\
474 	((((ACFG_SDRAM_BURST_LENGTH)&0x7)<<(0))\
475 	| (((REG_FIELD_SCL_VAL)&0x7)<<(4))\
476 	| ((0)<<(3)) /* sequentiql access */ \
477 	/*| (((ACFG_SDRAM_SINGLE_ACCESS)&0x1)<<(1))*/)
478 
479 /* Issue Extended Mode register Command to SDRAM */
480 #define ACFG_SDRAM_EXT_MODE_REGISTER_VAL\
481 	((ACFG_SDRAM_PARTIAL_ARRAY_SR<<0)\
482 	| (ACFG_SDRAM_DRIVE_STRENGH<<(5))\
483 	| (1<<(ACFG_SDRAM_NUM_COL+ACFG_SDRAM_NUM_ROW+1+2)))
484 
485 /* Issue Precharge all Command to SDRAM */
486 #define ACFG_SDRAM_PRECHARGE_ALL_VAL (1<<10)
487 
488 #endif /* __APF27_H */
489