1 /* 2 * Copyright (C) 2017 Marek Behun <marek.behun@nic.cz> 3 * Copyright (C) 2016 Tomas Hlavacek <tomas.hlavacek@nic.cz> 4 * 5 * Derived from the code for 6 * Marvell/db-88f6820-gp by Stefan Roese <sr@denx.de> 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #include <common.h> 12 #include <i2c.h> 13 #include <miiphy.h> 14 #include <netdev.h> 15 #include <asm/io.h> 16 #include <asm/arch/cpu.h> 17 #include <asm/arch/soc.h> 18 #include <dm/uclass.h> 19 #include <fdt_support.h> 20 #include <time.h> 21 22 #ifdef CONFIG_ATSHA204A 23 # include <atsha204a-i2c.h> 24 #endif 25 26 #ifdef CONFIG_WDT_ORION 27 # include <wdt.h> 28 #endif 29 30 #include "../drivers/ddr/marvell/a38x/ddr3_a38x_topology.h" 31 #include <../serdes/a38x/high_speed_env_spec.h> 32 33 DECLARE_GLOBAL_DATA_PTR; 34 35 #define OMNIA_I2C_EEPROM_DM_NAME "i2c@0" 36 #define OMNIA_I2C_EEPROM 0x54 37 #define OMNIA_I2C_EEPROM_CONFIG_ADDR 0x0 38 #define OMNIA_I2C_EEPROM_ADDRLEN 2 39 #define OMNIA_I2C_EEPROM_MAGIC 0x0341a034 40 41 #define OMNIA_I2C_MCU_DM_NAME "i2c@0" 42 #define OMNIA_I2C_MCU_ADDR_STATUS 0x1 43 #define OMNIA_I2C_MCU_SATA 0x20 44 #define OMNIA_I2C_MCU_CARDDET 0x10 45 #define OMNIA_I2C_MCU 0x2a 46 #define OMNIA_I2C_MCU_WDT_ADDR 0x0b 47 48 #define OMNIA_ATSHA204_OTP_VERSION 0 49 #define OMNIA_ATSHA204_OTP_SERIAL 1 50 #define OMNIA_ATSHA204_OTP_MAC0 3 51 #define OMNIA_ATSHA204_OTP_MAC1 4 52 53 #define MVTWSI_ARMADA_DEBUG_REG 0x8c 54 55 /* 56 * Those values and defines are taken from the Marvell U-Boot version 57 * "u-boot-2013.01-2014_T3.0" 58 */ 59 #define OMNIA_GPP_OUT_ENA_LOW \ 60 (~(BIT(1) | BIT(4) | BIT(6) | BIT(7) | BIT(8) | BIT(9) | \ 61 BIT(10) | BIT(11) | BIT(19) | BIT(22) | BIT(23) | BIT(25) | \ 62 BIT(26) | BIT(27) | BIT(29) | BIT(30) | BIT(31))) 63 #define OMNIA_GPP_OUT_ENA_MID \ 64 (~(BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(15) | \ 65 BIT(16) | BIT(17) | BIT(18))) 66 67 #define OMNIA_GPP_OUT_VAL_LOW 0x0 68 #define OMNIA_GPP_OUT_VAL_MID 0x0 69 #define OMNIA_GPP_POL_LOW 0x0 70 #define OMNIA_GPP_POL_MID 0x0 71 72 static struct serdes_map board_serdes_map_pex[] = { 73 {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, 74 {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, 75 {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, 76 {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, 77 {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, 78 {SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0} 79 }; 80 81 static struct serdes_map board_serdes_map_sata[] = { 82 {SATA0, SERDES_SPEED_6_GBPS, SERDES_DEFAULT_MODE, 0, 0}, 83 {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, 84 {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, 85 {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, 86 {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, 87 {SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0} 88 }; 89 90 static bool omnia_detect_sata(void) 91 { 92 struct udevice *bus, *dev; 93 int ret, retry = 3; 94 u16 mode; 95 96 puts("SERDES0 card detect: "); 97 98 if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_MCU_DM_NAME, &bus)) { 99 puts("Cannot find MCU bus!\n"); 100 return false; 101 } 102 103 ret = i2c_get_chip(bus, OMNIA_I2C_MCU, 1, &dev); 104 if (ret) { 105 puts("Cannot get MCU chip!\n"); 106 return false; 107 } 108 109 for (; retry > 0; --retry) { 110 ret = dm_i2c_read(dev, OMNIA_I2C_MCU_ADDR_STATUS, (uchar *) &mode, 2); 111 if (!ret) 112 break; 113 } 114 115 if (!retry) { 116 puts("I2C read failed! Default PEX\n"); 117 return false; 118 } 119 120 if (!(mode & OMNIA_I2C_MCU_CARDDET)) { 121 puts("NONE\n"); 122 return false; 123 } 124 125 if (mode & OMNIA_I2C_MCU_SATA) { 126 puts("SATA\n"); 127 return true; 128 } else { 129 puts("PEX\n"); 130 return false; 131 } 132 } 133 134 int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count) 135 { 136 if (omnia_detect_sata()) { 137 *serdes_map_array = board_serdes_map_sata; 138 *count = ARRAY_SIZE(board_serdes_map_sata); 139 } else { 140 *serdes_map_array = board_serdes_map_pex; 141 *count = ARRAY_SIZE(board_serdes_map_pex); 142 } 143 144 return 0; 145 } 146 147 struct omnia_eeprom { 148 u32 magic; 149 u32 ramsize; 150 char region[4]; 151 u32 crc; 152 }; 153 154 static bool omnia_read_eeprom(struct omnia_eeprom *oep) 155 { 156 struct udevice *bus, *dev; 157 int ret, crc, retry = 3; 158 159 if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_EEPROM_DM_NAME, &bus)) { 160 puts("Cannot find EEPROM bus\n"); 161 return false; 162 } 163 164 ret = i2c_get_chip(bus, OMNIA_I2C_EEPROM, OMNIA_I2C_EEPROM_ADDRLEN, &dev); 165 if (ret) { 166 puts("Cannot get EEPROM chip\n"); 167 return false; 168 } 169 170 for (; retry > 0; --retry) { 171 ret = dm_i2c_read(dev, OMNIA_I2C_EEPROM_CONFIG_ADDR, (uchar *) oep, sizeof(struct omnia_eeprom)); 172 if (ret) 173 continue; 174 175 if (oep->magic != OMNIA_I2C_EEPROM_MAGIC) { 176 puts("I2C EEPROM missing magic number!\n"); 177 continue; 178 } 179 180 crc = crc32(0, (unsigned char *) oep, 181 sizeof(struct omnia_eeprom) - 4); 182 if (crc == oep->crc) { 183 break; 184 } else { 185 printf("CRC of EEPROM memory config failed! " 186 "calc=0x%04x saved=0x%04x\n", crc, oep->crc); 187 } 188 } 189 190 if (!retry) { 191 puts("I2C EEPROM read failed!\n"); 192 return false; 193 } 194 195 return true; 196 } 197 198 /* 199 * Define the DDR layout / topology here in the board file. This will 200 * be used by the DDR3 init code in the SPL U-Boot version to configure 201 * the DDR3 controller. 202 */ 203 static struct hws_topology_map board_topology_map_1g = { 204 0x1, /* active interfaces */ 205 /* cs_mask, mirror, dqs_swap, ck_swap X PUPs */ 206 { { { {0x1, 0, 0, 0}, 207 {0x1, 0, 0, 0}, 208 {0x1, 0, 0, 0}, 209 {0x1, 0, 0, 0}, 210 {0x1, 0, 0, 0} }, 211 SPEED_BIN_DDR_1600K, /* speed_bin */ 212 BUS_WIDTH_16, /* memory_width */ 213 MEM_4G, /* mem_size */ 214 DDR_FREQ_800, /* frequency */ 215 0, 0, /* cas_l cas_wl */ 216 HWS_TEMP_NORMAL, /* temperature */ 217 HWS_TIM_2T} }, /* timing (force 2t) */ 218 5, /* Num Of Bus Per Interface*/ 219 BUS_MASK_32BIT /* Busses mask */ 220 }; 221 222 static struct hws_topology_map board_topology_map_2g = { 223 0x1, /* active interfaces */ 224 /* cs_mask, mirror, dqs_swap, ck_swap X PUPs */ 225 { { { {0x1, 0, 0, 0}, 226 {0x1, 0, 0, 0}, 227 {0x1, 0, 0, 0}, 228 {0x1, 0, 0, 0}, 229 {0x1, 0, 0, 0} }, 230 SPEED_BIN_DDR_1600K, /* speed_bin */ 231 BUS_WIDTH_16, /* memory_width */ 232 MEM_8G, /* mem_size */ 233 DDR_FREQ_800, /* frequency */ 234 0, 0, /* cas_l cas_wl */ 235 HWS_TEMP_NORMAL, /* temperature */ 236 HWS_TIM_2T} }, /* timing (force 2t) */ 237 5, /* Num Of Bus Per Interface*/ 238 BUS_MASK_32BIT /* Busses mask */ 239 }; 240 241 struct hws_topology_map *ddr3_get_topology_map(void) 242 { 243 static int mem = 0; 244 struct omnia_eeprom oep; 245 246 /* Get the board config from EEPROM */ 247 if (mem == 0) { 248 if(!omnia_read_eeprom(&oep)) 249 goto out; 250 251 printf("Memory config in EEPROM: 0x%02x\n", oep.ramsize); 252 253 if (oep.ramsize == 0x2) 254 mem = 2; 255 else 256 mem = 1; 257 } 258 259 out: 260 /* Hardcoded fallback */ 261 if (mem == 0) { 262 puts("WARNING: Memory config from EEPROM read failed.\n"); 263 puts("Falling back to default 1GiB map.\n"); 264 mem = 1; 265 } 266 267 /* Return the board topology as defined in the board code */ 268 if (mem == 1) 269 return &board_topology_map_1g; 270 if (mem == 2) 271 return &board_topology_map_2g; 272 273 return &board_topology_map_1g; 274 } 275 276 #ifndef CONFIG_SPL_BUILD 277 static int set_regdomain(void) 278 { 279 struct omnia_eeprom oep; 280 char rd[3] = {' ', ' ', 0}; 281 282 if (omnia_read_eeprom(&oep)) 283 memcpy(rd, &oep.region, 2); 284 else 285 puts("EEPROM regdomain read failed.\n"); 286 287 printf("Regdomain set to %s\n", rd); 288 return env_set("regdomain", rd); 289 } 290 #endif 291 292 int board_early_init_f(void) 293 { 294 u32 i2c_debug_reg; 295 296 /* Configure MPP */ 297 writel(0x11111111, MVEBU_MPP_BASE + 0x00); 298 writel(0x11111111, MVEBU_MPP_BASE + 0x04); 299 writel(0x11244011, MVEBU_MPP_BASE + 0x08); 300 writel(0x22222111, MVEBU_MPP_BASE + 0x0c); 301 writel(0x22200002, MVEBU_MPP_BASE + 0x10); 302 writel(0x30042022, MVEBU_MPP_BASE + 0x14); 303 writel(0x55550555, MVEBU_MPP_BASE + 0x18); 304 writel(0x00005550, MVEBU_MPP_BASE + 0x1c); 305 306 /* Set GPP Out value */ 307 writel(OMNIA_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00); 308 writel(OMNIA_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00); 309 310 /* Set GPP Polarity */ 311 writel(OMNIA_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c); 312 writel(OMNIA_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c); 313 314 /* Set GPP Out Enable */ 315 writel(OMNIA_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04); 316 writel(OMNIA_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04); 317 318 /* Disable I2C debug mode blocking 0x64 I2C address */ 319 i2c_debug_reg = readl(MVEBU_TWSI_BASE + MVTWSI_ARMADA_DEBUG_REG); 320 i2c_debug_reg &= ~(1<<18); 321 writel(i2c_debug_reg, MVEBU_TWSI_BASE + MVTWSI_ARMADA_DEBUG_REG); 322 323 return 0; 324 } 325 326 #ifndef CONFIG_SPL_BUILD 327 static bool disable_mcu_watchdog(void) 328 { 329 struct udevice *bus, *dev; 330 int ret, retry = 3; 331 uchar buf[1] = {0x0}; 332 333 if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_MCU_DM_NAME, &bus)) { 334 puts("Cannot find MCU bus! Can not disable MCU WDT.\n"); 335 return false; 336 } 337 338 ret = i2c_get_chip(bus, OMNIA_I2C_MCU, 1, &dev); 339 if (ret) { 340 puts("Cannot get MCU chip! Can not disable MCU WDT.\n"); 341 return false; 342 } 343 344 for (; retry > 0; --retry) 345 if (!dm_i2c_write(dev, OMNIA_I2C_MCU_WDT_ADDR, (uchar *) buf, 1)) 346 break; 347 348 if (retry <= 0) { 349 puts("I2C MCU watchdog failed to disable!\n"); 350 return false; 351 } 352 353 return true; 354 } 355 #endif 356 357 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION) 358 static struct udevice *watchdog_dev = NULL; 359 #endif 360 361 int board_init(void) 362 { 363 /* adress of boot parameters */ 364 gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; 365 366 #ifndef CONFIG_SPL_BUILD 367 # ifdef CONFIG_WDT_ORION 368 if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) { 369 puts("Cannot find Armada 385 watchdog!\n"); 370 } else { 371 puts("Enabling Armada 385 watchdog.\n"); 372 wdt_start(watchdog_dev, (u32) 25000000 * 120, 0); 373 } 374 # endif 375 376 if (disable_mcu_watchdog()) 377 puts("Disabled MCU startup watchdog.\n"); 378 379 set_regdomain(); 380 #endif 381 382 return 0; 383 } 384 385 #ifdef CONFIG_WATCHDOG 386 /* Called by macro WATCHDOG_RESET */ 387 void watchdog_reset(void) 388 { 389 # if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION) 390 static ulong next_reset = 0; 391 ulong now; 392 393 if (!watchdog_dev) 394 return; 395 396 now = timer_get_us(); 397 398 /* Do not reset the watchdog too often */ 399 if (now > next_reset) { 400 wdt_reset(watchdog_dev); 401 next_reset = now + 1000; 402 } 403 # endif 404 } 405 #endif 406 407 int board_late_init(void) 408 { 409 #ifndef CONFIG_SPL_BUILD 410 set_regdomain(); 411 #endif 412 413 return 0; 414 } 415 416 #ifdef CONFIG_ATSHA204A 417 static struct udevice *get_atsha204a_dev(void) 418 { 419 static struct udevice *dev = NULL; 420 421 if (dev != NULL) 422 return dev; 423 424 if (uclass_get_device_by_name(UCLASS_MISC, "atsha204a@64", &dev)) { 425 puts("Cannot find ATSHA204A on I2C bus!\n"); 426 dev = NULL; 427 } 428 429 return dev; 430 } 431 #endif 432 433 int checkboard(void) 434 { 435 u32 version_num, serial_num; 436 int err = 1; 437 438 #ifdef CONFIG_ATSHA204A 439 struct udevice *dev = get_atsha204a_dev(); 440 441 if (dev) { 442 err = atsha204a_wakeup(dev); 443 if (err) 444 goto out; 445 446 err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false, 447 OMNIA_ATSHA204_OTP_VERSION, 448 (u8 *) &version_num); 449 if (err) 450 goto out; 451 452 err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false, 453 OMNIA_ATSHA204_OTP_SERIAL, 454 (u8 *) &serial_num); 455 if (err) 456 goto out; 457 458 atsha204a_sleep(dev); 459 } 460 461 out: 462 #endif 463 464 if (err) 465 printf("Board: Turris Omnia (ver N/A). SN: N/A\n"); 466 else 467 printf("Board: Turris Omnia SNL %08X%08X\n", 468 be32_to_cpu(version_num), be32_to_cpu(serial_num)); 469 470 return 0; 471 } 472 473 static void increment_mac(u8 *mac) 474 { 475 int i; 476 477 for (i = 5; i >= 3; i--) { 478 mac[i] += 1; 479 if (mac[i]) 480 break; 481 } 482 } 483 484 int misc_init_r(void) 485 { 486 #ifdef CONFIG_ATSHA204A 487 int err; 488 struct udevice *dev = get_atsha204a_dev(); 489 u8 mac0[4], mac1[4], mac[6]; 490 491 if (!dev) 492 goto out; 493 494 err = atsha204a_wakeup(dev); 495 if (err) 496 goto out; 497 498 err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false, 499 OMNIA_ATSHA204_OTP_MAC0, mac0); 500 if (err) 501 goto out; 502 503 err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false, 504 OMNIA_ATSHA204_OTP_MAC1, mac1); 505 if (err) 506 goto out; 507 508 atsha204a_sleep(dev); 509 510 mac[0] = mac0[1]; 511 mac[1] = mac0[2]; 512 mac[2] = mac0[3]; 513 mac[3] = mac1[1]; 514 mac[4] = mac1[2]; 515 mac[5] = mac1[3]; 516 517 if (is_valid_ethaddr(mac)) 518 eth_env_set_enetaddr("ethaddr", mac); 519 520 increment_mac(mac); 521 522 if (is_valid_ethaddr(mac)) 523 eth_env_set_enetaddr("eth1addr", mac); 524 525 increment_mac(mac); 526 527 if (is_valid_ethaddr(mac)) 528 eth_env_set_enetaddr("eth2addr", mac); 529 530 out: 531 #endif 532 533 return 0; 534 } 535 536