1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2017 Marek Behun <marek.behun@nic.cz>
4  * Copyright (C) 2016 Tomas Hlavacek <tomas.hlavacek@nic.cz>
5  *
6  * Derived from the code for
7  *   Marvell/db-88f6820-gp by Stefan Roese <sr@denx.de>
8  */
9 
10 #include <common.h>
11 #include <environment.h>
12 #include <i2c.h>
13 #include <miiphy.h>
14 #include <netdev.h>
15 #include <asm/io.h>
16 #include <asm/arch/cpu.h>
17 #include <asm/arch/soc.h>
18 #include <dm/uclass.h>
19 #include <fdt_support.h>
20 #include <time.h>
21 
22 #ifdef CONFIG_ATSHA204A
23 # include <atsha204a-i2c.h>
24 #endif
25 
26 #ifdef CONFIG_WDT_ORION
27 # include <wdt.h>
28 #endif
29 
30 #include "../drivers/ddr/marvell/a38x/ddr3_init.h"
31 #include <../serdes/a38x/high_speed_env_spec.h>
32 
33 DECLARE_GLOBAL_DATA_PTR;
34 
35 #define OMNIA_I2C_EEPROM_DM_NAME	"i2c@0"
36 #define OMNIA_I2C_EEPROM		0x54
37 #define OMNIA_I2C_EEPROM_CONFIG_ADDR	0x0
38 #define OMNIA_I2C_EEPROM_ADDRLEN	2
39 #define OMNIA_I2C_EEPROM_MAGIC		0x0341a034
40 
41 #define OMNIA_I2C_MCU_DM_NAME		"i2c@0"
42 #define OMNIA_I2C_MCU_ADDR_STATUS	0x1
43 #define OMNIA_I2C_MCU_SATA		0x20
44 #define OMNIA_I2C_MCU_CARDDET		0x10
45 #define OMNIA_I2C_MCU			0x2a
46 #define OMNIA_I2C_MCU_WDT_ADDR		0x0b
47 
48 #define OMNIA_ATSHA204_OTP_VERSION	0
49 #define OMNIA_ATSHA204_OTP_SERIAL	1
50 #define OMNIA_ATSHA204_OTP_MAC0		3
51 #define OMNIA_ATSHA204_OTP_MAC1		4
52 
53 #define MVTWSI_ARMADA_DEBUG_REG		0x8c
54 
55 /*
56  * Those values and defines are taken from the Marvell U-Boot version
57  * "u-boot-2013.01-2014_T3.0"
58  */
59 #define OMNIA_GPP_OUT_ENA_LOW					\
60 	(~(BIT(1)  | BIT(4)  | BIT(6)  | BIT(7)  | BIT(8)  | BIT(9)  |	\
61 	   BIT(10) | BIT(11) | BIT(19) | BIT(22) | BIT(23) | BIT(25) |	\
62 	   BIT(26) | BIT(27) | BIT(29) | BIT(30) | BIT(31)))
63 #define OMNIA_GPP_OUT_ENA_MID					\
64 	(~(BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(15) |	\
65 	   BIT(16) | BIT(17) | BIT(18)))
66 
67 #define OMNIA_GPP_OUT_VAL_LOW	0x0
68 #define OMNIA_GPP_OUT_VAL_MID	0x0
69 #define OMNIA_GPP_POL_LOW	0x0
70 #define OMNIA_GPP_POL_MID	0x0
71 
72 static struct serdes_map board_serdes_map_pex[] = {
73 	{PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
74 	{USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
75 	{PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
76 	{USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
77 	{PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
78 	{SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0}
79 };
80 
81 static struct serdes_map board_serdes_map_sata[] = {
82 	{SATA0, SERDES_SPEED_6_GBPS, SERDES_DEFAULT_MODE, 0, 0},
83 	{USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
84 	{PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
85 	{USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
86 	{PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
87 	{SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0}
88 };
89 
90 static bool omnia_detect_sata(void)
91 {
92 	struct udevice *bus, *dev;
93 	int ret, retry = 3;
94 	u16 mode;
95 
96 	puts("SERDES0 card detect: ");
97 
98 	if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_MCU_DM_NAME, &bus)) {
99 		puts("Cannot find MCU bus!\n");
100 		return false;
101 	}
102 
103 	ret = i2c_get_chip(bus, OMNIA_I2C_MCU, 1, &dev);
104 	if (ret) {
105 		puts("Cannot get MCU chip!\n");
106 		return false;
107 	}
108 
109 	for (; retry > 0; --retry) {
110 		ret = dm_i2c_read(dev, OMNIA_I2C_MCU_ADDR_STATUS, (uchar *) &mode, 2);
111 		if (!ret)
112 			break;
113 	}
114 
115 	if (!retry) {
116 		puts("I2C read failed! Default PEX\n");
117 		return false;
118 	}
119 
120 	if (!(mode & OMNIA_I2C_MCU_CARDDET)) {
121 		puts("NONE\n");
122 		return false;
123 	}
124 
125 	if (mode & OMNIA_I2C_MCU_SATA) {
126 		puts("SATA\n");
127 		return true;
128 	} else {
129 		puts("PEX\n");
130 		return false;
131 	}
132 }
133 
134 int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
135 {
136 	if (omnia_detect_sata()) {
137 		*serdes_map_array = board_serdes_map_sata;
138 		*count = ARRAY_SIZE(board_serdes_map_sata);
139 	} else {
140 		*serdes_map_array = board_serdes_map_pex;
141 		*count = ARRAY_SIZE(board_serdes_map_pex);
142 	}
143 
144 	return 0;
145 }
146 
147 struct omnia_eeprom {
148 	u32 magic;
149 	u32 ramsize;
150 	char region[4];
151 	u32 crc;
152 };
153 
154 static bool omnia_read_eeprom(struct omnia_eeprom *oep)
155 {
156 	struct udevice *bus, *dev;
157 	int ret, crc, retry = 3;
158 
159 	if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_EEPROM_DM_NAME, &bus)) {
160 		puts("Cannot find EEPROM bus\n");
161 		return false;
162 	}
163 
164 	ret = i2c_get_chip(bus, OMNIA_I2C_EEPROM, OMNIA_I2C_EEPROM_ADDRLEN, &dev);
165 	if (ret) {
166 		puts("Cannot get EEPROM chip\n");
167 		return false;
168 	}
169 
170 	for (; retry > 0; --retry) {
171 		ret = dm_i2c_read(dev, OMNIA_I2C_EEPROM_CONFIG_ADDR, (uchar *) oep, sizeof(struct omnia_eeprom));
172 		if (ret)
173 			continue;
174 
175 		if (oep->magic != OMNIA_I2C_EEPROM_MAGIC) {
176 			puts("I2C EEPROM missing magic number!\n");
177 			continue;
178 		}
179 
180 		crc = crc32(0, (unsigned char *) oep,
181 			    sizeof(struct omnia_eeprom) - 4);
182 		if (crc == oep->crc) {
183 			break;
184 		} else {
185 			printf("CRC of EEPROM memory config failed! "
186 			       "calc=0x%04x saved=0x%04x\n", crc, oep->crc);
187 		}
188 	}
189 
190 	if (!retry) {
191 		puts("I2C EEPROM read failed!\n");
192 		return false;
193 	}
194 
195 	return true;
196 }
197 
198 /*
199  * Define the DDR layout / topology here in the board file. This will
200  * be used by the DDR3 init code in the SPL U-Boot version to configure
201  * the DDR3 controller.
202  */
203 static struct mv_ddr_topology_map board_topology_map_1g = {
204 	DEBUG_LEVEL_ERROR,
205 	0x1, /* active interfaces */
206 	/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
207 	{ { { {0x1, 0, 0, 0},
208 	      {0x1, 0, 0, 0},
209 	      {0x1, 0, 0, 0},
210 	      {0x1, 0, 0, 0},
211 	      {0x1, 0, 0, 0} },
212 	    SPEED_BIN_DDR_1600K,	/* speed_bin */
213 	    MV_DDR_DEV_WIDTH_16BIT,	/* memory_width */
214 	    MV_DDR_DIE_CAP_4GBIT,			/* mem_size */
215 	    DDR_FREQ_800,		/* frequency */
216 	    0, 0,			/* cas_wl cas_l */
217 	    MV_DDR_TEMP_NORMAL,		/* temperature */
218 	    MV_DDR_TIM_2T} },		/* timing */
219 	BUS_MASK_32BIT,			/* Busses mask */
220 	MV_DDR_CFG_DEFAULT,		/* ddr configuration data source */
221 	{ {0} },			/* raw spd data */
222 	{0}				/* timing parameters */
223 };
224 
225 static struct mv_ddr_topology_map board_topology_map_2g = {
226 	DEBUG_LEVEL_ERROR,
227 	0x1, /* active interfaces */
228 	/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
229 	{ { { {0x1, 0, 0, 0},
230 	      {0x1, 0, 0, 0},
231 	      {0x1, 0, 0, 0},
232 	      {0x1, 0, 0, 0},
233 	      {0x1, 0, 0, 0} },
234 	    SPEED_BIN_DDR_1600K,	/* speed_bin */
235 	    MV_DDR_DEV_WIDTH_16BIT,	/* memory_width */
236 	    MV_DDR_DIE_CAP_8GBIT,			/* mem_size */
237 	    DDR_FREQ_800,		/* frequency */
238 	    0, 0,			/* cas_wl cas_l */
239 	    MV_DDR_TEMP_NORMAL,		/* temperature */
240 	    MV_DDR_TIM_2T} },		/* timing */
241 	BUS_MASK_32BIT,			/* Busses mask */
242 	MV_DDR_CFG_DEFAULT,		/* ddr configuration data source */
243 	{ {0} },			/* raw spd data */
244 	{0}				/* timing parameters */
245 };
246 
247 struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
248 {
249 	static int mem = 0;
250 	struct omnia_eeprom oep;
251 
252 	/* Get the board config from EEPROM */
253 	if (mem == 0) {
254 		if(!omnia_read_eeprom(&oep))
255 			goto out;
256 
257 		printf("Memory config in EEPROM: 0x%02x\n", oep.ramsize);
258 
259 		if (oep.ramsize == 0x2)
260 			mem = 2;
261 		else
262 			mem = 1;
263 	}
264 
265 out:
266 	/* Hardcoded fallback */
267 	if (mem == 0) {
268 		puts("WARNING: Memory config from EEPROM read failed.\n");
269 		puts("Falling back to default 1GiB map.\n");
270 		mem = 1;
271 	}
272 
273 	/* Return the board topology as defined in the board code */
274 	if (mem == 1)
275 		return &board_topology_map_1g;
276 	if (mem == 2)
277 		return &board_topology_map_2g;
278 
279 	return &board_topology_map_1g;
280 }
281 
282 #ifndef CONFIG_SPL_BUILD
283 static int set_regdomain(void)
284 {
285 	struct omnia_eeprom oep;
286 	char rd[3] = {' ', ' ', 0};
287 
288 	if (omnia_read_eeprom(&oep))
289 		memcpy(rd, &oep.region, 2);
290 	else
291 		puts("EEPROM regdomain read failed.\n");
292 
293 	printf("Regdomain set to %s\n", rd);
294 	return env_set("regdomain", rd);
295 }
296 #endif
297 
298 int board_early_init_f(void)
299 {
300 	u32 i2c_debug_reg;
301 
302 	/* Configure MPP */
303 	writel(0x11111111, MVEBU_MPP_BASE + 0x00);
304 	writel(0x11111111, MVEBU_MPP_BASE + 0x04);
305 	writel(0x11244011, MVEBU_MPP_BASE + 0x08);
306 	writel(0x22222111, MVEBU_MPP_BASE + 0x0c);
307 	writel(0x22200002, MVEBU_MPP_BASE + 0x10);
308 	writel(0x30042022, MVEBU_MPP_BASE + 0x14);
309 	writel(0x55550555, MVEBU_MPP_BASE + 0x18);
310 	writel(0x00005550, MVEBU_MPP_BASE + 0x1c);
311 
312 	/* Set GPP Out value */
313 	writel(OMNIA_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
314 	writel(OMNIA_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
315 
316 	/* Set GPP Polarity */
317 	writel(OMNIA_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
318 	writel(OMNIA_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
319 
320 	/* Set GPP Out Enable */
321 	writel(OMNIA_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
322 	writel(OMNIA_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
323 
324 	/*
325 	 * Disable I2C debug mode blocking 0x64 I2C address.
326 	 * Note: that would be redundant once Turris Omnia migrates to DM_I2C,
327 	 * because the mvtwsi driver includes equivalent code.
328 	 */
329 	i2c_debug_reg = readl(MVEBU_TWSI_BASE + MVTWSI_ARMADA_DEBUG_REG);
330 	i2c_debug_reg &= ~(1<<18);
331 	writel(i2c_debug_reg, MVEBU_TWSI_BASE + MVTWSI_ARMADA_DEBUG_REG);
332 
333 	return 0;
334 }
335 
336 #ifndef CONFIG_SPL_BUILD
337 static bool disable_mcu_watchdog(void)
338 {
339 	struct udevice *bus, *dev;
340 	int ret, retry = 3;
341 	uchar buf[1] = {0x0};
342 
343 	if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_MCU_DM_NAME, &bus)) {
344 		puts("Cannot find MCU bus! Can not disable MCU WDT.\n");
345 		return false;
346 	}
347 
348 	ret = i2c_get_chip(bus, OMNIA_I2C_MCU, 1, &dev);
349 	if (ret) {
350 		puts("Cannot get MCU chip! Can not disable MCU WDT.\n");
351 		return false;
352 	}
353 
354 	for (; retry > 0; --retry)
355 		if (!dm_i2c_write(dev, OMNIA_I2C_MCU_WDT_ADDR, (uchar *) buf, 1))
356 			break;
357 
358 	if (retry <= 0) {
359 		puts("I2C MCU watchdog failed to disable!\n");
360 		return false;
361 	}
362 
363 	return true;
364 }
365 #endif
366 
367 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION)
368 static struct udevice *watchdog_dev = NULL;
369 #endif
370 
371 int board_init(void)
372 {
373 	/* adress of boot parameters */
374 	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
375 
376 #ifndef CONFIG_SPL_BUILD
377 # ifdef CONFIG_WDT_ORION
378 	if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
379 		puts("Cannot find Armada 385 watchdog!\n");
380 	} else {
381 		puts("Enabling Armada 385 watchdog.\n");
382 		wdt_start(watchdog_dev, (u32) 25000000 * 120, 0);
383 	}
384 # endif
385 
386 	if (disable_mcu_watchdog())
387 		puts("Disabled MCU startup watchdog.\n");
388 
389 	set_regdomain();
390 #endif
391 
392 	return 0;
393 }
394 
395 #ifdef CONFIG_WATCHDOG
396 /* Called by macro WATCHDOG_RESET */
397 void watchdog_reset(void)
398 {
399 # if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION)
400 	static ulong next_reset = 0;
401 	ulong now;
402 
403 	if (!watchdog_dev)
404 		return;
405 
406 	now = timer_get_us();
407 
408 	/* Do not reset the watchdog too often */
409 	if (now > next_reset) {
410 		wdt_reset(watchdog_dev);
411 		next_reset = now + 1000;
412 	}
413 # endif
414 }
415 #endif
416 
417 int board_late_init(void)
418 {
419 #ifndef CONFIG_SPL_BUILD
420 	set_regdomain();
421 #endif
422 
423 	return 0;
424 }
425 
426 #ifdef CONFIG_ATSHA204A
427 static struct udevice *get_atsha204a_dev(void)
428 {
429 	static struct udevice *dev = NULL;
430 
431 	if (dev != NULL)
432 		return dev;
433 
434 	if (uclass_get_device_by_name(UCLASS_MISC, "atsha204a@64", &dev)) {
435 		puts("Cannot find ATSHA204A on I2C bus!\n");
436 		dev = NULL;
437 	}
438 
439 	return dev;
440 }
441 #endif
442 
443 int checkboard(void)
444 {
445 	u32 version_num, serial_num;
446 	int err = 1;
447 
448 #ifdef CONFIG_ATSHA204A
449 	struct udevice *dev = get_atsha204a_dev();
450 
451 	if (dev) {
452 		err = atsha204a_wakeup(dev);
453 		if (err)
454 			goto out;
455 
456 		err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
457 				     OMNIA_ATSHA204_OTP_VERSION,
458 				     (u8 *) &version_num);
459 		if (err)
460 			goto out;
461 
462 		err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
463 				     OMNIA_ATSHA204_OTP_SERIAL,
464 				     (u8 *) &serial_num);
465 		if (err)
466 			goto out;
467 
468 		atsha204a_sleep(dev);
469 	}
470 
471 out:
472 #endif
473 
474 	if (err)
475 		printf("Board: Turris Omnia (ver N/A). SN: N/A\n");
476 	else
477 		printf("Board: Turris Omnia SNL %08X%08X\n",
478 		       be32_to_cpu(version_num), be32_to_cpu(serial_num));
479 
480 	return 0;
481 }
482 
483 static void increment_mac(u8 *mac)
484 {
485 	int i;
486 
487 	for (i = 5; i >= 3; i--) {
488 		mac[i] += 1;
489 		if (mac[i])
490 			break;
491 	}
492 }
493 
494 int misc_init_r(void)
495 {
496 #ifdef CONFIG_ATSHA204A
497 	int err;
498 	struct udevice *dev = get_atsha204a_dev();
499 	u8 mac0[4], mac1[4], mac[6];
500 
501 	if (!dev)
502 		goto out;
503 
504 	err = atsha204a_wakeup(dev);
505 	if (err)
506 		goto out;
507 
508 	err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
509 			     OMNIA_ATSHA204_OTP_MAC0, mac0);
510 	if (err)
511 		goto out;
512 
513 	err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
514 			     OMNIA_ATSHA204_OTP_MAC1, mac1);
515 	if (err)
516 		goto out;
517 
518 	atsha204a_sleep(dev);
519 
520 	mac[0] = mac0[1];
521 	mac[1] = mac0[2];
522 	mac[2] = mac0[3];
523 	mac[3] = mac1[1];
524 	mac[4] = mac1[2];
525 	mac[5] = mac1[3];
526 
527 	if (is_valid_ethaddr(mac))
528 		eth_env_set_enetaddr("ethaddr", mac);
529 
530 	increment_mac(mac);
531 
532 	if (is_valid_ethaddr(mac))
533 		eth_env_set_enetaddr("eth1addr", mac);
534 
535 	increment_mac(mac);
536 
537 	if (is_valid_ethaddr(mac))
538 		eth_env_set_enetaddr("eth2addr", mac);
539 
540 out:
541 #endif
542 
543 	return 0;
544 }
545 
546