xref: /openbmc/u-boot/board/Barix/ipam390/ipam390.c (revision d9b23e26)
1 /*
2  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
3  * Based on:
4  * U-Boot:board/davinci/da8xxevm/da850evm.c
5  *
6  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
7  *
8  * Based on da830evm.c. Original Copyrights follow:
9  *
10  * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
11  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
12  *
13  * SPDX-License-Identifier:	GPL-2.0+
14  */
15 
16 #include <common.h>
17 #include <i2c.h>
18 #include <net.h>
19 #include <netdev.h>
20 #include <spi.h>
21 #include <spi_flash.h>
22 #include <asm/arch/hardware.h>
23 #include <asm/ti-common/davinci_nand.h>
24 #include <asm/arch/emac_defs.h>
25 #include <asm/arch/pinmux_defs.h>
26 #include <asm/io.h>
27 #include <asm/arch/davinci_misc.h>
28 #include <linux/errno.h>
29 #include <asm/gpio.h>
30 #include <hwconfig.h>
31 #include <bootstage.h>
32 #include <asm/mach-types.h>
33 
34 DECLARE_GLOBAL_DATA_PTR;
35 
36 #ifdef CONFIG_DRIVER_TI_EMAC
37 #ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII
38 #define HAS_RMII 1
39 #else
40 #define HAS_RMII 0
41 #endif
42 #endif /* CONFIG_DRIVER_TI_EMAC */
43 
44 void dsp_lpsc_on(unsigned domain, unsigned int id)
45 {
46 	dv_reg_p mdstat, mdctl, ptstat, ptcmd;
47 	struct davinci_psc_regs *psc_regs;
48 
49 	psc_regs = davinci_psc0_regs;
50 	mdstat = &psc_regs->psc0.mdstat[id];
51 	mdctl = &psc_regs->psc0.mdctl[id];
52 	ptstat = &psc_regs->ptstat;
53 	ptcmd = &psc_regs->ptcmd;
54 
55 	while (*ptstat & (0x1 << domain))
56 		;
57 
58 	if ((*mdstat & 0x1f) == 0x03)
59 		return;                 /* Already on and enabled */
60 
61 	*mdctl |= 0x03;
62 
63 	*ptcmd = 0x1 << domain;
64 
65 	while (*ptstat & (0x1 << domain))
66 		;
67 	while ((*mdstat & 0x1f) != 0x03)
68 		;		/* Probably an overkill... */
69 }
70 
71 static void dspwake(void)
72 {
73 	unsigned *resetvect = (unsigned *)DAVINCI_L3CBARAM_BASE;
74 	u32 val;
75 
76 	/* if the device is ARM only, return */
77 	if ((readl(CHIP_REV_ID_REG) & 0x3f) == 0x10)
78 		return;
79 
80 	if (hwconfig_subarg_cmp_f("dsp", "wake", "no", NULL))
81 		return;
82 
83 	*resetvect++ = 0x1E000; /* DSP Idle */
84 	/* clear out the next 10 words as NOP */
85 	memset(resetvect, 0, sizeof(unsigned) * 10);
86 
87 	/* setup the DSP reset vector */
88 	writel(DAVINCI_L3CBARAM_BASE, HOST1CFG);
89 
90 	dsp_lpsc_on(1, DAVINCI_LPSC_GEM);
91 	val = readl(PSC0_MDCTL + (15 * 4));
92 	val |= 0x100;
93 	writel(val, (PSC0_MDCTL + (15 * 4)));
94 }
95 
96 int misc_init_r(void)
97 {
98 	dspwake();
99 	return 0;
100 }
101 
102 static const struct pinmux_config gpio_pins[] = {
103 	/* GP7[14] selects bootmode*/
104 	{ pinmux(16), 8, 3 },	/* GP7[14] */
105 };
106 
107 const struct pinmux_resource pinmuxes[] = {
108 #ifdef CONFIG_DRIVER_TI_EMAC
109 	PINMUX_ITEM(emac_pins_mdio),
110 #ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII
111 	PINMUX_ITEM(emac_pins_rmii),
112 #else
113 	PINMUX_ITEM(emac_pins_mii),
114 #endif
115 #endif
116 	PINMUX_ITEM(uart2_pins_txrx),
117 	PINMUX_ITEM(uart2_pins_rtscts),
118 	PINMUX_ITEM(uart0_pins_txrx),
119 	PINMUX_ITEM(uart0_pins_rtscts),
120 #ifdef CONFIG_NAND_DAVINCI
121 	PINMUX_ITEM(emifa_pins_cs3),
122 	PINMUX_ITEM(emifa_pins_nand),
123 #endif
124 	PINMUX_ITEM(gpio_pins),
125 };
126 
127 const int pinmuxes_size = ARRAY_SIZE(pinmuxes);
128 
129 const struct lpsc_resource lpsc[] = {
130 	{ DAVINCI_LPSC_AEMIF },	/* NAND, NOR */
131 	{ DAVINCI_LPSC_EMAC },	/* image download */
132 	{ DAVINCI_LPSC_UART2 },	/* console */
133 	{ DAVINCI_LPSC_UART0 },	/* console */
134 	{ DAVINCI_LPSC_GPIO },
135 };
136 
137 const int lpsc_size = ARRAY_SIZE(lpsc);
138 
139 #ifndef CONFIG_DA850_EVM_MAX_CPU_CLK
140 #define CONFIG_DA850_EVM_MAX_CPU_CLK	300000000
141 #endif
142 
143 #define REV_AM18X_EVM		0x100
144 
145 /*
146  * get_board_rev() - setup to pass kernel board revision information
147  * Returns:
148  * bit[0-3]	Maximum cpu clock rate supported by onboard SoC
149  *		0000b - 300 MHz
150  *		0001b - 372 MHz
151  *		0010b - 408 MHz
152  *		0011b - 456 MHz
153  */
154 u32 get_board_rev(void)
155 {
156 	char *s;
157 	u32 maxcpuclk = CONFIG_DA850_EVM_MAX_CPU_CLK;
158 	u32 rev = 0;
159 
160 	s = env_get("maxcpuclk");
161 	if (s)
162 		maxcpuclk = simple_strtoul(s, NULL, 10);
163 
164 	if (maxcpuclk >= 456000000)
165 		rev = 3;
166 	else if (maxcpuclk >= 408000000)
167 		rev = 2;
168 	else if (maxcpuclk >= 372000000)
169 		rev = 1;
170 #ifdef CONFIG_DA850_AM18X_EVM
171 	rev |= REV_AM18X_EVM;
172 #endif
173 	return rev;
174 }
175 
176 int board_early_init_f(void)
177 {
178 	/*
179 	 * Power on required peripherals
180 	 * ARM does not have access by default to PSC0 and PSC1
181 	 * assuming here that the DSP bootloader has set the IOPU
182 	 * such that PSC access is available to ARM
183 	 */
184 	if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc)))
185 		return 1;
186 
187 	return 0;
188 }
189 
190 int board_init(void)
191 {
192 	irq_init();
193 
194 	/* arch number of the board */
195 	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA850_EVM;
196 
197 	/* address of boot parameters */
198 	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
199 
200 	/* setup the SUSPSRC for ARM to control emulation suspend */
201 	writel(readl(&davinci_syscfg_regs->suspsrc) &
202 	       ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
203 		 DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
204 		 DAVINCI_SYSCFG_SUSPSRC_UART0),
205 	       &davinci_syscfg_regs->suspsrc);
206 
207 	/* configure pinmux settings */
208 	if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes)))
209 		return 1;
210 
211 #ifdef CONFIG_DRIVER_TI_EMAC
212 	davinci_emac_mii_mode_sel(HAS_RMII);
213 #endif /* CONFIG_DRIVER_TI_EMAC */
214 
215 	/* enable the console UART */
216 	writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
217 		DAVINCI_UART_PWREMU_MGMT_UTRST),
218 #if (CONFIG_SYS_NS16550_COM1 == DAVINCI_UART0_BASE)
219 	       &davinci_uart0_ctrl_regs->pwremu_mgmt);
220 #else
221 	       &davinci_uart2_ctrl_regs->pwremu_mgmt);
222 #endif
223 	return 0;
224 }
225 
226 #ifdef CONFIG_DRIVER_TI_EMAC
227 /*
228  * Initializes on-board ethernet controllers.
229  */
230 int board_eth_init(bd_t *bis)
231 {
232 	if (!davinci_emac_initialize()) {
233 		printf("Error: Ethernet init failed!\n");
234 		return -1;
235 	}
236 
237 	return 0;
238 }
239 #endif /* CONFIG_DRIVER_TI_EMAC */
240 
241 static int init_led(int gpio, char *name, int val)
242 {
243 	int ret;
244 
245 	ret = gpio_request(gpio, name);
246 	if (ret)
247 		return -1;
248 	ret = gpio_direction_output(gpio, val);
249 	if (ret)
250 		return -1;
251 
252 	return gpio;
253 }
254 
255 #define LED_ON	0
256 #define LED_OFF	1
257 
258 #if !defined(CONFIG_SPL_BUILD)
259 #ifdef CONFIG_SHOW_BOOT_PROGRESS
260 void show_boot_progress(int status)
261 {
262 	static int red;
263 	static int green;
264 
265 	if (red == 0)
266 		red = init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON);
267 	if (red != CONFIG_IPAM390_GPIO_LED_RED)
268 		return;
269 	if (green == 0)
270 		green = init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green",
271 				 LED_OFF);
272 	if (green != CONFIG_IPAM390_GPIO_LED_GREEN)
273 		return;
274 
275 	switch (status) {
276 	case BOOTSTAGE_ID_RUN_OS:
277 		/*
278 		 * set normal state
279 		 * LED Red  : on
280 		 * LED green: off
281 		 */
282 		gpio_set_value(red, LED_ON);
283 		gpio_set_value(green, LED_OFF);
284 		break;
285 	case BOOTSTAGE_ID_MAIN_LOOP:
286 		/*
287 		 * U-Boot operation
288 		 * LED Red  : on
289 		 * LED green: on
290 		 */
291 		gpio_set_value(red, LED_ON);
292 		gpio_set_value(green, LED_ON);
293 		break;
294 	}
295 }
296 #endif
297 #endif
298 
299 #ifdef CONFIG_SPL_OS_BOOT
300 int spl_start_uboot(void)
301 {
302 	int ret;
303 	int bootmode = 0;
304 
305 	/*
306 	 * GP7[14] selects bootmode:
307 	 * 1: boot linux
308 	 * 0: boot u-boot
309 	 * if error accessing gpio boot U-Boot
310 	 *
311 	 * SPL bootmode
312 	 * 0: boot linux
313 	 * 1: boot u-boot
314 	 */
315 	ret = gpio_request(CONFIG_IPAM390_GPIO_BOOTMODE , "bootmode");
316 	if (ret)
317 		bootmode = 1;
318 	if (!bootmode) {
319 		ret = gpio_direction_input(CONFIG_IPAM390_GPIO_BOOTMODE);
320 		if (ret)
321 			bootmode = 1;
322 	}
323 	if (!bootmode)
324 		ret = gpio_get_value(CONFIG_IPAM390_GPIO_BOOTMODE);
325 	if (!bootmode)
326 		if (ret == 0)
327 			bootmode = 1;
328 	/*
329 	 * LED red  : on
330 	 * LED green: off
331 	 */
332 	init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON);
333 	init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", LED_OFF);
334 	return bootmode;
335 }
336 #endif
337