xref: /openbmc/u-boot/board/Barix/ipam390/ipam390.c (revision 23ff8633)
1 /*
2  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
3  * Based on:
4  * U-Boot:board/davinci/da8xxevm/da850evm.c
5  *
6  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
7  *
8  * Based on da830evm.c. Original Copyrights follow:
9  *
10  * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
11  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
12  *
13  * SPDX-License-Identifier:	GPL-2.0+
14  */
15 
16 #include <common.h>
17 #include <i2c.h>
18 #include <net.h>
19 #include <netdev.h>
20 #include <spi.h>
21 #include <spi_flash.h>
22 #include <asm/arch/hardware.h>
23 #include <asm/ti-common/davinci_nand.h>
24 #include <asm/arch/emac_defs.h>
25 #include <asm/arch/pinmux_defs.h>
26 #include <asm/io.h>
27 #include <asm/arch/davinci_misc.h>
28 #include <asm/errno.h>
29 #include <asm/gpio.h>
30 #include <hwconfig.h>
31 #include <bootstage.h>
32 
33 DECLARE_GLOBAL_DATA_PTR;
34 
35 #ifdef CONFIG_DRIVER_TI_EMAC
36 #ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII
37 #define HAS_RMII 1
38 #else
39 #define HAS_RMII 0
40 #endif
41 #endif /* CONFIG_DRIVER_TI_EMAC */
42 
43 void dsp_lpsc_on(unsigned domain, unsigned int id)
44 {
45 	dv_reg_p mdstat, mdctl, ptstat, ptcmd;
46 	struct davinci_psc_regs *psc_regs;
47 
48 	psc_regs = davinci_psc0_regs;
49 	mdstat = &psc_regs->psc0.mdstat[id];
50 	mdctl = &psc_regs->psc0.mdctl[id];
51 	ptstat = &psc_regs->ptstat;
52 	ptcmd = &psc_regs->ptcmd;
53 
54 	while (*ptstat & (0x1 << domain))
55 		;
56 
57 	if ((*mdstat & 0x1f) == 0x03)
58 		return;                 /* Already on and enabled */
59 
60 	*mdctl |= 0x03;
61 
62 	*ptcmd = 0x1 << domain;
63 
64 	while (*ptstat & (0x1 << domain))
65 		;
66 	while ((*mdstat & 0x1f) != 0x03)
67 		;		/* Probably an overkill... */
68 }
69 
70 static void dspwake(void)
71 {
72 	unsigned *resetvect = (unsigned *)DAVINCI_L3CBARAM_BASE;
73 	u32 val;
74 
75 	/* if the device is ARM only, return */
76 	if ((readl(CHIP_REV_ID_REG) & 0x3f) == 0x10)
77 		return;
78 
79 	if (hwconfig_subarg_cmp_f("dsp", "wake", "no", NULL))
80 		return;
81 
82 	*resetvect++ = 0x1E000; /* DSP Idle */
83 	/* clear out the next 10 words as NOP */
84 	memset(resetvect, 0, sizeof(unsigned) * 10);
85 
86 	/* setup the DSP reset vector */
87 	writel(DAVINCI_L3CBARAM_BASE, HOST1CFG);
88 
89 	dsp_lpsc_on(1, DAVINCI_LPSC_GEM);
90 	val = readl(PSC0_MDCTL + (15 * 4));
91 	val |= 0x100;
92 	writel(val, (PSC0_MDCTL + (15 * 4)));
93 }
94 
95 int misc_init_r(void)
96 {
97 	dspwake();
98 	return 0;
99 }
100 
101 static const struct pinmux_config gpio_pins[] = {
102 	/* GP7[14] selects bootmode*/
103 	{ pinmux(16), 8, 3 },	/* GP7[14] */
104 };
105 
106 const struct pinmux_resource pinmuxes[] = {
107 #ifdef CONFIG_DRIVER_TI_EMAC
108 	PINMUX_ITEM(emac_pins_mdio),
109 #ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII
110 	PINMUX_ITEM(emac_pins_rmii),
111 #else
112 	PINMUX_ITEM(emac_pins_mii),
113 #endif
114 #endif
115 	PINMUX_ITEM(uart2_pins_txrx),
116 	PINMUX_ITEM(uart2_pins_rtscts),
117 	PINMUX_ITEM(uart0_pins_txrx),
118 	PINMUX_ITEM(uart0_pins_rtscts),
119 #ifdef CONFIG_NAND_DAVINCI
120 	PINMUX_ITEM(emifa_pins_cs3),
121 	PINMUX_ITEM(emifa_pins_nand),
122 #endif
123 	PINMUX_ITEM(gpio_pins),
124 };
125 
126 const int pinmuxes_size = ARRAY_SIZE(pinmuxes);
127 
128 const struct lpsc_resource lpsc[] = {
129 	{ DAVINCI_LPSC_AEMIF },	/* NAND, NOR */
130 	{ DAVINCI_LPSC_EMAC },	/* image download */
131 	{ DAVINCI_LPSC_UART2 },	/* console */
132 	{ DAVINCI_LPSC_UART0 },	/* console */
133 	{ DAVINCI_LPSC_GPIO },
134 };
135 
136 const int lpsc_size = ARRAY_SIZE(lpsc);
137 
138 #ifndef CONFIG_DA850_EVM_MAX_CPU_CLK
139 #define CONFIG_DA850_EVM_MAX_CPU_CLK	300000000
140 #endif
141 
142 #define REV_AM18X_EVM		0x100
143 
144 /*
145  * get_board_rev() - setup to pass kernel board revision information
146  * Returns:
147  * bit[0-3]	Maximum cpu clock rate supported by onboard SoC
148  *		0000b - 300 MHz
149  *		0001b - 372 MHz
150  *		0010b - 408 MHz
151  *		0011b - 456 MHz
152  */
153 u32 get_board_rev(void)
154 {
155 	char *s;
156 	u32 maxcpuclk = CONFIG_DA850_EVM_MAX_CPU_CLK;
157 	u32 rev = 0;
158 
159 	s = getenv("maxcpuclk");
160 	if (s)
161 		maxcpuclk = simple_strtoul(s, NULL, 10);
162 
163 	if (maxcpuclk >= 456000000)
164 		rev = 3;
165 	else if (maxcpuclk >= 408000000)
166 		rev = 2;
167 	else if (maxcpuclk >= 372000000)
168 		rev = 1;
169 #ifdef CONFIG_DA850_AM18X_EVM
170 	rev |= REV_AM18X_EVM;
171 #endif
172 	return rev;
173 }
174 
175 int board_early_init_f(void)
176 {
177 	/*
178 	 * Power on required peripherals
179 	 * ARM does not have access by default to PSC0 and PSC1
180 	 * assuming here that the DSP bootloader has set the IOPU
181 	 * such that PSC access is available to ARM
182 	 */
183 	if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc)))
184 		return 1;
185 
186 	return 0;
187 }
188 
189 int board_init(void)
190 {
191 #ifndef CONFIG_USE_IRQ
192 	irq_init();
193 #endif
194 
195 	/* arch number of the board */
196 	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA850_EVM;
197 
198 	/* address of boot parameters */
199 	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
200 
201 	/* setup the SUSPSRC for ARM to control emulation suspend */
202 	writel(readl(&davinci_syscfg_regs->suspsrc) &
203 	       ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
204 		 DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
205 		 DAVINCI_SYSCFG_SUSPSRC_UART0),
206 	       &davinci_syscfg_regs->suspsrc);
207 
208 	/* configure pinmux settings */
209 	if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes)))
210 		return 1;
211 
212 #ifdef CONFIG_DRIVER_TI_EMAC
213 	davinci_emac_mii_mode_sel(HAS_RMII);
214 #endif /* CONFIG_DRIVER_TI_EMAC */
215 
216 	/* enable the console UART */
217 	writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
218 		DAVINCI_UART_PWREMU_MGMT_UTRST),
219 #if (CONFIG_SYS_NS16550_COM1 == DAVINCI_UART0_BASE)
220 	       &davinci_uart0_ctrl_regs->pwremu_mgmt);
221 #else
222 	       &davinci_uart2_ctrl_regs->pwremu_mgmt);
223 #endif
224 	return 0;
225 }
226 
227 #ifdef CONFIG_DRIVER_TI_EMAC
228 /*
229  * Initializes on-board ethernet controllers.
230  */
231 int board_eth_init(bd_t *bis)
232 {
233 	if (!davinci_emac_initialize()) {
234 		printf("Error: Ethernet init failed!\n");
235 		return -1;
236 	}
237 
238 	return 0;
239 }
240 #endif /* CONFIG_DRIVER_TI_EMAC */
241 
242 static int init_led(int gpio, char *name, int val)
243 {
244 	int ret;
245 
246 	ret = gpio_request(gpio, name);
247 	if (ret)
248 		return -1;
249 	ret = gpio_direction_output(gpio, val);
250 	if (ret)
251 		return -1;
252 
253 	return gpio;
254 }
255 
256 #define LED_ON	0
257 #define LED_OFF	1
258 
259 #if !defined(CONFIG_SPL_BUILD)
260 #ifdef CONFIG_SHOW_BOOT_PROGRESS
261 void show_boot_progress(int status)
262 {
263 	static int red;
264 	static int green;
265 
266 	if (red == 0)
267 		red = init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON);
268 	if (red != CONFIG_IPAM390_GPIO_LED_RED)
269 		return;
270 	if (green == 0)
271 		green = init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green",
272 				 LED_OFF);
273 	if (green != CONFIG_IPAM390_GPIO_LED_GREEN)
274 		return;
275 
276 	switch (status) {
277 	case BOOTSTAGE_ID_RUN_OS:
278 		/*
279 		 * set normal state
280 		 * LED Red  : on
281 		 * LED green: off
282 		 */
283 		gpio_set_value(red, LED_ON);
284 		gpio_set_value(green, LED_OFF);
285 		break;
286 	case BOOTSTAGE_ID_MAIN_LOOP:
287 		/*
288 		 * U-Boot operation
289 		 * LED Red  : on
290 		 * LED green: on
291 		 */
292 		gpio_set_value(red, LED_ON);
293 		gpio_set_value(green, LED_ON);
294 		break;
295 	}
296 }
297 #endif
298 #endif
299 
300 #ifdef CONFIG_SPL_OS_BOOT
301 int spl_start_uboot(void)
302 {
303 	int ret;
304 	int bootmode = 0;
305 
306 	/*
307 	 * GP7[14] selects bootmode:
308 	 * 1: boot linux
309 	 * 0: boot u-boot
310 	 * if error accessing gpio boot U-Boot
311 	 *
312 	 * SPL bootmode
313 	 * 0: boot linux
314 	 * 1: boot u-boot
315 	 */
316 	ret = gpio_request(CONFIG_IPAM390_GPIO_BOOTMODE , "bootmode");
317 	if (ret)
318 		bootmode = 1;
319 	if (!bootmode) {
320 		ret = gpio_direction_input(CONFIG_IPAM390_GPIO_BOOTMODE);
321 		if (ret)
322 			bootmode = 1;
323 	}
324 	if (!bootmode)
325 		ret = gpio_get_value(CONFIG_IPAM390_GPIO_BOOTMODE);
326 	if (!bootmode)
327 		if (ret == 0)
328 			bootmode = 1;
329 	/*
330 	 * LED red  : on
331 	 * LED green: off
332 	 */
333 	init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON);
334 	init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", LED_OFF);
335 	return bootmode;
336 }
337 #endif
338