xref: /openbmc/u-boot/board/Arcturus/ucp1020/tlb.c (revision 29b103c7)
1 /*
2  * Copyright 2013-2015 Arcturus Networks, Inc
3  *           http://www.arcturusnetworks.com/products/ucp1020/
4  * based on board/freescale/p1_p2_rdb_pc/tlb.c
5  * original copyright follows:
6  * Copyright 2010-2011 Freescale Semiconductor, Inc.
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #include <common.h>
12 #include <asm/mmu.h>
13 
14 struct fsl_e_tlb_entry tlb_table[] = {
15 	/* TLB 0 - for temp stack in cache */
16 	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
17 		      CONFIG_SYS_INIT_RAM_ADDR_PHYS,
18 		      MAS3_SX | MAS3_SW | MAS3_SR, 0,
19 		      0, 0, BOOKE_PAGESZ_4K, 0),
20 	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
21 		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
22 		      MAS3_SX | MAS3_SW | MAS3_SR, 0,
23 		      0, 0, BOOKE_PAGESZ_4K, 0),
24 	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
25 		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
26 		      MAS3_SX | MAS3_SW | MAS3_SR, 0,
27 		      0, 0, BOOKE_PAGESZ_4K, 0),
28 	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
29 		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
30 		      MAS3_SX | MAS3_SW | MAS3_SR, 0,
31 		      0, 0, BOOKE_PAGESZ_4K, 0),
32 
33 	/* TLB 1 */
34 	/* *I*** - Covers boot page */
35 	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
36 		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I,
37 		      0, 0, BOOKE_PAGESZ_4K, 1),
38 
39 	/* *I*G* - CCSRBAR */
40 	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
41 		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
42 		      0, 1, BOOKE_PAGESZ_1M, 1),
43 
44 #ifndef CONFIG_SPL_BUILD
45 	/* W**G* - Flash/promjet, localbus */
46 	/* This will be changed to *I*G* after relocation to RAM. */
47 	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
48 		      MAS3_SX | MAS3_SR, MAS2_W | MAS2_G,
49 		      0, 2, BOOKE_PAGESZ_64M, 1),
50 
51 #ifdef CONFIG_PCI
52 	/* *I*G* - PCI memory 1.5G */
53 	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
54 		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
55 		      0, 3, BOOKE_PAGESZ_1G, 1),
56 
57 	/* *I*G* - PCI I/O effective: 192K  */
58 	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
59 		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
60 		      0, 4, BOOKE_PAGESZ_256K, 1),
61 #endif
62 
63 #ifdef CONFIG_VSC7385_ENET
64 	/* *I*G - VSC7385 Switch */
65 	SET_TLB_ENTRY(1, CONFIG_SYS_VSC7385_BASE, CONFIG_SYS_VSC7385_BASE_PHYS,
66 		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
67 		      0, 5, BOOKE_PAGESZ_1M, 1),
68 #endif
69 #endif /* not SPL */
70 
71 #ifdef CONFIG_SYS_NAND_BASE
72 	/* *I*G - NAND */
73 	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
74 		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
75 		      0, 7, BOOKE_PAGESZ_1M, 1),
76 #endif
77 
78 #if defined(CONFIG_SYS_RAMBOOT) || \
79 	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR))
80 	/* *I*G - eSDHC/eSPI/NAND boot */
81 	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
82 		      MAS3_SX | MAS3_SW | MAS3_SR, 0,
83 		      0, 8, BOOKE_PAGESZ_1G, 1),
84 
85 #endif /* RAMBOOT/SPL */
86 
87 #ifdef CONFIG_SYS_INIT_L2_ADDR
88 	/* *I*G - L2SRAM */
89 	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
90 		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_G,
91 		      0, 11, BOOKE_PAGESZ_256K, 1),
92 #if CONFIG_SYS_L2_SIZE >= (256 << 10)
93 	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
94 		      CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
95 		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
96 		      0, 12, BOOKE_PAGESZ_256K, 1)
97 #endif
98 #endif
99 };
100 
101 int num_tlb_entries = ARRAY_SIZE(tlb_table);
102