xref: /openbmc/u-boot/arch/x86/lib/fsp/fsp_common.c (revision 87a62bce)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
4  */
5 
6 #include <common.h>
7 #include <dm.h>
8 #include <errno.h>
9 #include <rtc.h>
10 #include <asm/acpi_s3.h>
11 #include <asm/cmos_layout.h>
12 #include <asm/early_cmos.h>
13 #include <asm/io.h>
14 #include <asm/mrccache.h>
15 #include <asm/post.h>
16 #include <asm/processor.h>
17 #include <asm/fsp/fsp_support.h>
18 
19 DECLARE_GLOBAL_DATA_PTR;
20 
21 int checkcpu(void)
22 {
23 	return 0;
24 }
25 
26 int print_cpuinfo(void)
27 {
28 	post_code(POST_CPU_INFO);
29 	return default_print_cpuinfo();
30 }
31 
32 int fsp_init_phase_pci(void)
33 {
34 	u32 status;
35 
36 	/* call into FspNotify */
37 	debug("Calling into FSP (notify phase INIT_PHASE_PCI): ");
38 	status = fsp_notify(NULL, INIT_PHASE_PCI);
39 	if (status)
40 		debug("fail, error code %x\n", status);
41 	else
42 		debug("OK\n");
43 
44 	return status ? -EPERM : 0;
45 }
46 
47 void board_final_cleanup(void)
48 {
49 	u32 status;
50 
51 	/* call into FspNotify */
52 	debug("Calling into FSP (notify phase INIT_PHASE_BOOT): ");
53 	status = fsp_notify(NULL, INIT_PHASE_BOOT);
54 	if (status)
55 		debug("fail, error code %x\n", status);
56 	else
57 		debug("OK\n");
58 
59 	return;
60 }
61 
62 static __maybe_unused void *fsp_prepare_mrc_cache(void)
63 {
64 	struct mrc_data_container *cache;
65 	struct mrc_region entry;
66 	int ret;
67 
68 	ret = mrccache_get_region(NULL, &entry);
69 	if (ret)
70 		return NULL;
71 
72 	cache = mrccache_find_current(&entry);
73 	if (!cache)
74 		return NULL;
75 
76 	debug("%s: mrc cache at %p, size %x checksum %04x\n", __func__,
77 	      cache->data, cache->data_size, cache->checksum);
78 
79 	return cache->data;
80 }
81 
82 #ifdef CONFIG_HAVE_ACPI_RESUME
83 int fsp_save_s3_stack(void)
84 {
85 	struct udevice *dev;
86 	int ret;
87 
88 	if (gd->arch.prev_sleep_state == ACPI_S3)
89 		return 0;
90 
91 	ret = uclass_get_device(UCLASS_RTC, 0, &dev);
92 	if (ret) {
93 		debug("Cannot find RTC: err=%d\n", ret);
94 		return -ENODEV;
95 	}
96 
97 	/* Save the stack address to CMOS */
98 	ret = rtc_write32(dev, CMOS_FSP_STACK_ADDR, gd->start_addr_sp);
99 	if (ret) {
100 		debug("Save stack address to CMOS: err=%d\n", ret);
101 		return -EIO;
102 	}
103 
104 	return 0;
105 }
106 #endif
107 
108 int arch_fsp_init(void)
109 {
110 	void *nvs;
111 	int stack = CONFIG_FSP_TEMP_RAM_ADDR;
112 	int boot_mode = BOOT_FULL_CONFIG;
113 #ifdef CONFIG_HAVE_ACPI_RESUME
114 	int prev_sleep_state = chipset_prev_sleep_state();
115 	gd->arch.prev_sleep_state = prev_sleep_state;
116 #endif
117 
118 	if (!gd->arch.hob_list) {
119 #ifdef CONFIG_ENABLE_MRC_CACHE
120 		nvs = fsp_prepare_mrc_cache();
121 #else
122 		nvs = NULL;
123 #endif
124 
125 #ifdef CONFIG_HAVE_ACPI_RESUME
126 		if (prev_sleep_state == ACPI_S3) {
127 			if (nvs == NULL) {
128 				/* If waking from S3 and no cache then */
129 				debug("No MRC cache found in S3 resume path\n");
130 				post_code(POST_RESUME_FAILURE);
131 				/* Clear Sleep Type */
132 				chipset_clear_sleep_state();
133 				/* Reboot */
134 				debug("Rebooting..\n");
135 				reset_cpu(0);
136 				/* Should not reach here.. */
137 				panic("Reboot System");
138 			}
139 
140 			/*
141 			 * DM is not avaiable yet at this point, hence call
142 			 * CMOS access library which does not depend on DM.
143 			 */
144 			stack = cmos_read32(CMOS_FSP_STACK_ADDR);
145 			boot_mode = BOOT_ON_S3_RESUME;
146 		}
147 #endif
148 		/*
149 		 * The first time we enter here, call fsp_init().
150 		 * Note the execution does not return to this function,
151 		 * instead it jumps to fsp_continue().
152 		 */
153 		fsp_init(stack, boot_mode, nvs);
154 	} else {
155 		/*
156 		 * The second time we enter here, adjust the size of malloc()
157 		 * pool before relocation. Given gd->malloc_base was adjusted
158 		 * after the call to board_init_f_init_reserve() in arch/x86/
159 		 * cpu/start.S, we should fix up gd->malloc_limit here.
160 		 */
161 		gd->malloc_limit += CONFIG_FSP_SYS_MALLOC_F_LEN;
162 	}
163 
164 	return 0;
165 }
166