xref: /openbmc/u-boot/arch/x86/lib/fsp/fsp_common.c (revision 30b1ecd2)
1 /*
2  * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <dm.h>
9 #include <errno.h>
10 #include <rtc.h>
11 #include <asm/acpi_s3.h>
12 #include <asm/cmos_layout.h>
13 #include <asm/early_cmos.h>
14 #include <asm/io.h>
15 #include <asm/mrccache.h>
16 #include <asm/post.h>
17 #include <asm/processor.h>
18 #include <asm/fsp/fsp_support.h>
19 
20 DECLARE_GLOBAL_DATA_PTR;
21 
22 int checkcpu(void)
23 {
24 	return 0;
25 }
26 
27 int print_cpuinfo(void)
28 {
29 	post_code(POST_CPU_INFO);
30 	return default_print_cpuinfo();
31 }
32 
33 int fsp_init_phase_pci(void)
34 {
35 	u32 status;
36 
37 	/* call into FspNotify */
38 	debug("Calling into FSP (notify phase INIT_PHASE_PCI): ");
39 	status = fsp_notify(NULL, INIT_PHASE_PCI);
40 	if (status)
41 		debug("fail, error code %x\n", status);
42 	else
43 		debug("OK\n");
44 
45 	return status ? -EPERM : 0;
46 }
47 
48 void board_final_cleanup(void)
49 {
50 	u32 status;
51 
52 	/* call into FspNotify */
53 	debug("Calling into FSP (notify phase INIT_PHASE_BOOT): ");
54 	status = fsp_notify(NULL, INIT_PHASE_BOOT);
55 	if (status)
56 		debug("fail, error code %x\n", status);
57 	else
58 		debug("OK\n");
59 
60 	return;
61 }
62 
63 static __maybe_unused void *fsp_prepare_mrc_cache(void)
64 {
65 	struct mrc_data_container *cache;
66 	struct mrc_region entry;
67 	int ret;
68 
69 	ret = mrccache_get_region(NULL, &entry);
70 	if (ret)
71 		return NULL;
72 
73 	cache = mrccache_find_current(&entry);
74 	if (!cache)
75 		return NULL;
76 
77 	debug("%s: mrc cache at %p, size %x checksum %04x\n", __func__,
78 	      cache->data, cache->data_size, cache->checksum);
79 
80 	return cache->data;
81 }
82 
83 #ifdef CONFIG_HAVE_ACPI_RESUME
84 int fsp_save_s3_stack(void)
85 {
86 	struct udevice *dev;
87 	int ret;
88 
89 	if (gd->arch.prev_sleep_state == ACPI_S3)
90 		return 0;
91 
92 	ret = uclass_get_device(UCLASS_RTC, 0, &dev);
93 	if (ret) {
94 		debug("Cannot find RTC: err=%d\n", ret);
95 		return -ENODEV;
96 	}
97 
98 	/* Save the stack address to CMOS */
99 	ret = rtc_write32(dev, CMOS_FSP_STACK_ADDR, gd->start_addr_sp);
100 	if (ret) {
101 		debug("Save stack address to CMOS: err=%d\n", ret);
102 		return -EIO;
103 	}
104 
105 	return 0;
106 }
107 #endif
108 
109 int arch_fsp_init(void)
110 {
111 	void *nvs;
112 	int stack = CONFIG_FSP_TEMP_RAM_ADDR;
113 	int boot_mode = BOOT_FULL_CONFIG;
114 #ifdef CONFIG_HAVE_ACPI_RESUME
115 	int prev_sleep_state = chipset_prev_sleep_state();
116 	gd->arch.prev_sleep_state = prev_sleep_state;
117 #endif
118 
119 	if (!gd->arch.hob_list) {
120 #ifdef CONFIG_ENABLE_MRC_CACHE
121 		nvs = fsp_prepare_mrc_cache();
122 #else
123 		nvs = NULL;
124 #endif
125 
126 #ifdef CONFIG_HAVE_ACPI_RESUME
127 		if (prev_sleep_state == ACPI_S3) {
128 			if (nvs == NULL) {
129 				/* If waking from S3 and no cache then */
130 				debug("No MRC cache found in S3 resume path\n");
131 				post_code(POST_RESUME_FAILURE);
132 				/* Clear Sleep Type */
133 				chipset_clear_sleep_state();
134 				/* Reboot */
135 				debug("Rebooting..\n");
136 				reset_cpu(0);
137 				/* Should not reach here.. */
138 				panic("Reboot System");
139 			}
140 
141 			/*
142 			 * DM is not avaiable yet at this point, hence call
143 			 * CMOS access library which does not depend on DM.
144 			 */
145 			stack = cmos_read32(CMOS_FSP_STACK_ADDR);
146 			boot_mode = BOOT_ON_S3_RESUME;
147 		}
148 #endif
149 		/*
150 		 * The first time we enter here, call fsp_init().
151 		 * Note the execution does not return to this function,
152 		 * instead it jumps to fsp_continue().
153 		 */
154 		fsp_init(stack, boot_mode, nvs);
155 	} else {
156 		/*
157 		 * The second time we enter here, adjust the size of malloc()
158 		 * pool before relocation. Given gd->malloc_base was adjusted
159 		 * after the call to board_init_f_init_reserve() in arch/x86/
160 		 * cpu/start.S, we should fix up gd->malloc_limit here.
161 		 */
162 		gd->malloc_limit += CONFIG_FSP_SYS_MALLOC_F_LEN;
163 	}
164 
165 	return 0;
166 }
167