xref: /openbmc/u-boot/arch/x86/include/asm/tables.h (revision 010ad8c3)
1 /*
2  * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef _X86_TABLES_H_
8 #define _X86_TABLES_H_
9 
10 #include <tables_csum.h>
11 
12 #define ROM_TABLE_ADDR	CONFIG_ROM_TABLE_ADDR
13 #define ROM_TABLE_END	(CONFIG_ROM_TABLE_ADDR + CONFIG_ROM_TABLE_SIZE - 1)
14 
15 #define ROM_TABLE_ALIGN	1024
16 
17 /* SeaBIOS expects coreboot tables at address range 0x0000-0x1000 */
18 #define CB_TABLE_ADDR	0x800
19 
20 /**
21  * table_compute_checksum() - Compute a table checksum
22  *
23  * This computes an 8-bit checksum for the configuration table.
24  * All bytes in the configuration table, including checksum itself and
25  * reserved bytes must add up to zero.
26  *
27  * @v:		configuration table base address
28  * @len:	configuration table size
29  * @return:	the 8-bit checksum
30  */
31 u8 table_compute_checksum(void *v, int len);
32 
33 /**
34  * table_fill_string() - Fill a string with pad in the configuration table
35  *
36  * This fills a string in the configuration table. It copies number of bytes
37  * from the source string, and if source string length is shorter than the
38  * required size to copy, pad the table string with the given pad character.
39  *
40  * @dest:	where to fill a string
41  * @src:	where to copy from
42  * @n:		number of bytes to copy
43  * @pad:	character to pad the remaining bytes
44  */
45 void table_fill_string(char *dest, const char *src, size_t n, char pad);
46 
47 /**
48  * write_tables() - Write x86 configuration tables
49  *
50  * This writes x86 configuration tables, including PIRQ routing table,
51  * Multi-Processor table and ACPI table. Whether a specific type of
52  * configuration table is written is controlled by a Kconfig option.
53  */
54 void write_tables(void);
55 
56 /**
57  * write_pirq_routing_table() - Write PIRQ routing table
58  *
59  * This writes PIRQ routing table at a given address.
60  *
61  * @start:	start address to write PIRQ routing table
62  * @return:	end address of PIRQ routing table
63  */
64 ulong write_pirq_routing_table(ulong start);
65 
66 #endif /* _X86_TABLES_H_ */
67