xref: /openbmc/u-boot/arch/x86/include/asm/speedstep.h (revision cf0bcd7d)
1 /*
2  * From Coreboot file of same name
3  *
4  * Copyright (C) 2007-2009 coresystems GmbH
5  *               2012 secunet Security Networks AG
6  *
7  * SPDX-License-Identifier:	GPL-2.0
8  */
9 
10 #ifndef _ASM_SPEEDSTEP_H
11 #define _ASM_SPEEDSTEP_H
12 
13 /* Magic value used to locate speedstep configuration in the device tree */
14 #define SPEEDSTEP_APIC_MAGIC 0xACAC
15 
16 /* MWAIT coordination I/O base address. This must match
17  * the \_PR_.CPU0 PM base address.
18  */
19 #define PMB0_BASE 0x510
20 
21 /* PMB1: I/O port that triggers SMI once cores are in the same state.
22  * See CSM Trigger, at PMG_CST_CONFIG_CONTROL[6:4]
23  */
24 #define PMB1_BASE 0x800
25 
26 struct sst_state {
27 	uint8_t dynfsb:1; /* whether this is SLFM */
28 	uint8_t nonint:1; /* add .5 to ratio */
29 	uint8_t ratio:6;
30 	uint8_t vid;
31 	uint8_t is_turbo;
32 	uint8_t is_slfm;
33 	uint32_t power;
34 };
35 #define SPEEDSTEP_RATIO_SHIFT		8
36 #define SPEEDSTEP_RATIO_DYNFSB_SHIFT	(7 + SPEEDSTEP_RATIO_SHIFT)
37 #define SPEEDSTEP_RATIO_DYNFSB		(1 << SPEEDSTEP_RATIO_DYNFSB_SHIFT)
38 #define SPEEDSTEP_RATIO_NONINT_SHIFT	(6 + SPEEDSTEP_RATIO_SHIFT)
39 #define SPEEDSTEP_RATIO_NONINT		(1 << SPEEDSTEP_RATIO_NONINT_SHIFT)
40 #define SPEEDSTEP_RATIO_VALUE_MASK	(0x1f << SPEEDSTEP_RATIO_SHIFT)
41 #define SPEEDSTEP_VID_MASK		0x3f
42 #define SPEEDSTEP_STATE_FROM_MSR(val, mask) ((struct sst_state){	\
43 		0, /* dynfsb won't be read. */				\
44 		((val & mask) & SPEEDSTEP_RATIO_NONINT) ? 1 : 0,	\
45 		(((val & mask) & SPEEDSTEP_RATIO_VALUE_MASK)		\
46 					>> SPEEDSTEP_RATIO_SHIFT),	\
47 		(val & mask) & SPEEDSTEP_VID_MASK,			\
48 		0, /* not turbo by default */				\
49 		0, /* not slfm by default */				\
50 		0  /* power is hardcoded in software. */		\
51 	})
52 #define SPEEDSTEP_ENCODE_STATE(state)	(				\
53 	((uint16_t)(state).dynfsb << SPEEDSTEP_RATIO_DYNFSB_SHIFT) |	\
54 	((uint16_t)(state).nonint << SPEEDSTEP_RATIO_NONINT_SHIFT) |	\
55 	((uint16_t)(state).ratio << SPEEDSTEP_RATIO_SHIFT) |		\
56 	((uint16_t)(state).vid & SPEEDSTEP_VID_MASK))
57 #define SPEEDSTEP_DOUBLE_RATIO(state)	(				\
58 	((uint8_t)(state).ratio * 2) + (state).nonint)
59 
60 struct sst_params {
61 	struct sst_state slfm;
62 	struct sst_state min;
63 	struct sst_state max;
64 	struct sst_state turbo;
65 };
66 
67 /* Looking at core2's spec, the highest normal bus ratio for an eist enabled
68    processor is 14, the lowest is always 6. This makes 5 states with the
69    minimal step width of 2. With turbo mode and super LFM we have at most 7. */
70 #define SPEEDSTEP_MAX_NORMAL_STATES	5
71 #define SPEEDSTEP_MAX_STATES		(SPEEDSTEP_MAX_NORMAL_STATES + 2)
72 struct sst_table {
73 	/* Table of p-states for EMTTM and ACPI by decreasing performance. */
74 	struct sst_state states[SPEEDSTEP_MAX_STATES];
75 	int num_states;
76 };
77 
78 void speedstep_gen_pstates(struct sst_table *);
79 
80 #define SPEEDSTEP_MAX_POWER_YONAH	31000
81 #define SPEEDSTEP_MIN_POWER_YONAH	13100
82 #define SPEEDSTEP_MAX_POWER_MEROM	35000
83 #define SPEEDSTEP_MIN_POWER_MEROM	25000
84 #define SPEEDSTEP_SLFM_POWER_MEROM	12000
85 #define SPEEDSTEP_MAX_POWER_PENRYN	35000
86 #define SPEEDSTEP_MIN_POWER_PENRYN	15000
87 #define SPEEDSTEP_SLFM_POWER_PENRYN	12000
88 
89 #endif
90