1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> 4 */ 5 6 #ifndef _ARCH_IRQ_H_ 7 #define _ARCH_IRQ_H_ 8 9 #include <dt-bindings/interrupt-router/intel-irq.h> 10 11 /** 12 * Intel interrupt router configuration mechanism 13 * 14 * There are two known ways of Intel interrupt router configuration mechanism 15 * so far. On most cases, the IRQ routing configuraiton is controlled by PCI 16 * configuraiton registers on the legacy bridge, normally PCI BDF(0, 31, 0). 17 * On some newer platforms like BayTrail and Braswell, the IRQ routing is now 18 * in the IBASE register block where IBASE is memory-mapped. 19 */ 20 enum pirq_config { 21 PIRQ_VIA_PCI, 22 PIRQ_VIA_IBASE 23 }; 24 25 struct pirq_regmap { 26 int link; 27 int offset; 28 }; 29 30 /** 31 * Intel interrupt router control block 32 * 33 * Its members' value will be filled in based on device tree's input. 34 * 35 * @config: PIRQ_VIA_PCI or PIRQ_VIA_IBASE 36 * @link_base: link value base number 37 * @link_num: number of PIRQ links supported 38 * @has_regmap: has mapping table between PIRQ link and routing register offset 39 * @irq_mask: IRQ mask reprenting the 16 IRQs in 8259, bit N is 1 means 40 * IRQ N is available to be routed 41 * @lb_bdf: irq router's PCI bus/device/function number encoding 42 * @ibase: IBASE register block base address 43 * @actl_8bit: ACTL register width is 8-bit (for ICH series chipset) 44 * @actl_addr: ACTL register offset 45 */ 46 struct irq_router { 47 int config; 48 u32 link_base; 49 int link_num; 50 bool has_regmap; 51 struct pirq_regmap *regmap; 52 u16 irq_mask; 53 u32 bdf; 54 u32 ibase; 55 bool actl_8bit; 56 int actl_addr; 57 }; 58 59 struct pirq_routing { 60 int bdf; 61 int pin; 62 int pirq; 63 }; 64 65 #define PIRQ_BITMAP 0xdef8 66 67 #endif /* _ARCH_IRQ_H_ */ 68