xref: /openbmc/u-boot/arch/x86/include/asm/io.h (revision 83f1c2ef)
1 #ifndef _ASM_IO_H
2 #define _ASM_IO_H
3 
4 #include <linux/compiler.h>
5 
6 /*
7  * This file contains the definitions for the x86 IO instructions
8  * inb/inw/inl/outb/outw/outl and the "string versions" of the same
9  * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
10  * versions of the single-IO instructions (inb_p/inw_p/..).
11  *
12  * This file is not meant to be obfuscating: it's just complicated
13  * to (a) handle it all in a way that makes gcc able to optimize it
14  * as well as possible and (b) trying to avoid writing the same thing
15  * over and over again with slight variations and possibly making a
16  * mistake somewhere.
17  */
18 
19 /*
20  * Thanks to James van Artsdalen for a better timing-fix than
21  * the two short jumps: using outb's to a nonexistent port seems
22  * to guarantee better timings even on fast machines.
23  *
24  * On the other hand, I'd like to be sure of a non-existent port:
25  * I feel a bit unsafe about using 0x80 (should be safe, though)
26  *
27  *		Linus
28  */
29 
30  /*
31   *  Bit simplified and optimized by Jan Hubicka
32   *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
33   *
34   *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
35   *  isa_read[wl] and isa_write[wl] fixed
36   *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
37   */
38 
39 #define IO_SPACE_LIMIT 0xffff
40 
41 #include <asm/types.h>
42 
43 
44 #ifdef __KERNEL__
45 
46 
47 /*
48  * readX/writeX() are used to access memory mapped devices. On some
49  * architectures the memory mapped IO stuff needs to be accessed
50  * differently. On the x86 architecture, we just read/write the
51  * memory location directly.
52  */
53 
54 #define readb(addr) (*(volatile unsigned char *) (addr))
55 #define readw(addr) (*(volatile unsigned short *) (addr))
56 #define readl(addr) (*(volatile unsigned int *) (addr))
57 #define __raw_readb readb
58 #define __raw_readw readw
59 #define __raw_readl readl
60 
61 #define writeb(b,addr) (*(volatile unsigned char *) (addr) = (b))
62 #define writew(b,addr) (*(volatile unsigned short *) (addr) = (b))
63 #define writel(b,addr) (*(volatile unsigned int *) (addr) = (b))
64 #define __raw_writeb writeb
65 #define __raw_writew writew
66 #define __raw_writel writel
67 
68 #define memset_io(a,b,c)	memset((a),(b),(c))
69 #define memcpy_fromio(a,b,c)	memcpy((a),(b),(c))
70 #define memcpy_toio(a,b,c)	memcpy((a),(b),(c))
71 
72 #define write_arch(type, endian, a, v) __raw_write##type(cpu_to_##endian(v), a)
73 #define read_arch(type, endian, a) endian##_to_cpu(__raw_read##type(a))
74 
75 #define write_le64(a, v)	write_arch(q, le64, a, v)
76 #define write_le32(a, v)	write_arch(l, le32, a, v)
77 #define write_le16(a, v)	write_arch(w, le16, a, v)
78 
79 #define read_le64(a)	read_arch(q, le64, a)
80 #define read_le32(a)	read_arch(l, le32, a)
81 #define read_le16(a)	read_arch(w, le16, a)
82 
83 #define write_be32(a, v)	write_arch(l, be32, a, v)
84 #define write_be16(a, v)	write_arch(w, be16, a, v)
85 
86 #define read_be32(a)	read_arch(l, be32, a)
87 #define read_be16(a)	read_arch(w, be16, a)
88 
89 #define write_8(a, v)	__raw_writeb(v, a)
90 #define read_8(a)	__raw_readb(a)
91 
92 #define clrbits(type, addr, clear) \
93 	write_##type((addr), read_##type(addr) & ~(clear))
94 
95 #define setbits(type, addr, set) \
96 	write_##type((addr), read_##type(addr) | (set))
97 
98 #define clrsetbits(type, addr, clear, set) \
99 	write_##type((addr), (read_##type(addr) & ~(clear)) | (set))
100 
101 #define clrbits_be32(addr, clear) clrbits(be32, addr, clear)
102 #define setbits_be32(addr, set) setbits(be32, addr, set)
103 #define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
104 
105 #define clrbits_le32(addr, clear) clrbits(le32, addr, clear)
106 #define setbits_le32(addr, set) setbits(le32, addr, set)
107 #define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
108 
109 #define clrbits_be16(addr, clear) clrbits(be16, addr, clear)
110 #define setbits_be16(addr, set) setbits(be16, addr, set)
111 #define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
112 
113 #define clrbits_le16(addr, clear) clrbits(le16, addr, clear)
114 #define setbits_le16(addr, set) setbits(le16, addr, set)
115 #define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
116 
117 #define clrbits_8(addr, clear) clrbits(8, addr, clear)
118 #define setbits_8(addr, set) setbits(8, addr, set)
119 #define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
120 
121 /*
122  * ISA space is 'always mapped' on a typical x86 system, no need to
123  * explicitly ioremap() it. The fact that the ISA IO space is mapped
124  * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
125  * are physical addresses. The following constant pointer can be
126  * used as the IO-area pointer (it can be iounmapped as well, so the
127  * analogy with PCI is quite large):
128  */
129 #define isa_readb(a) readb((a))
130 #define isa_readw(a) readw((a))
131 #define isa_readl(a) readl((a))
132 #define isa_writeb(b,a) writeb(b,(a))
133 #define isa_writew(w,a) writew(w,(a))
134 #define isa_writel(l,a) writel(l,(a))
135 #define isa_memset_io(a,b,c)		memset_io((a),(b),(c))
136 #define isa_memcpy_fromio(a,b,c)	memcpy_fromio((a),(b),(c))
137 #define isa_memcpy_toio(a,b,c)		memcpy_toio((a),(b),(c))
138 
139 
140 static inline int check_signature(unsigned long io_addr,
141 	const unsigned char *signature, int length)
142 {
143 	int retval = 0;
144 	do {
145 		if (readb(io_addr) != *signature)
146 			goto out;
147 		io_addr++;
148 		signature++;
149 		length--;
150 	} while (length);
151 	retval = 1;
152 out:
153 	return retval;
154 }
155 
156 /**
157  *	isa_check_signature		-	find BIOS signatures
158  *	@io_addr: mmio address to check
159  *	@signature:  signature block
160  *	@length: length of signature
161  *
162  *	Perform a signature comparison with the ISA mmio address io_addr.
163  *	Returns 1 on a match.
164  *
165  *	This function is deprecated. New drivers should use ioremap and
166  *	check_signature.
167  */
168 
169 
170 static inline int isa_check_signature(unsigned long io_addr,
171 	const unsigned char *signature, int length)
172 {
173 	int retval = 0;
174 	do {
175 		if (isa_readb(io_addr) != *signature)
176 			goto out;
177 		io_addr++;
178 		signature++;
179 		length--;
180 	} while (length);
181 	retval = 1;
182 out:
183 	return retval;
184 }
185 
186 #endif /* __KERNEL__ */
187 
188 #ifdef SLOW_IO_BY_JUMPING
189 #define __SLOW_DOWN_IO "\njmp 1f\n1:\tjmp 1f\n1:"
190 #else
191 #define __SLOW_DOWN_IO "\noutb %%al,$0xed"
192 #endif
193 
194 #ifdef REALLY_SLOW_IO
195 #define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO
196 #else
197 #define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO
198 #endif
199 
200 
201 /*
202  * Talk about misusing macros..
203  */
204 #define __OUT1(s,x) \
205 static inline void _out##s(unsigned x value, unsigned short port) {
206 
207 #define __OUT2(s,s1,s2) \
208 __asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1"
209 
210 
211 #define __OUT(s,s1,x) \
212 __OUT1(s,x) __OUT2(s,s1,"w") : : "a" (value), "Nd" (port)); } \
213 __OUT1(s##_p,x) __OUT2(s,s1,"w") __FULL_SLOW_DOWN_IO : : "a" (value), "Nd" (port));}
214 
215 #define __IN1(s) \
216 static inline RETURN_TYPE _in##s(unsigned short port) { RETURN_TYPE _v;
217 
218 #define __IN2(s,s1,s2) \
219 __asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0"
220 
221 #define __IN(s,s1,i...) \
222 __IN1(s) __IN2(s,s1,"w") : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \
223 __IN1(s##_p) __IN2(s,s1,"w") __FULL_SLOW_DOWN_IO : "=a" (_v) : "Nd" (port) ,##i ); return _v; }
224 
225 #define __INS(s) \
226 static inline void ins##s(unsigned short port, void * addr, unsigned long count) \
227 { __asm__ __volatile__ ("rep ; ins" #s \
228 : "=D" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
229 
230 #define __OUTS(s) \
231 static inline void outs##s(unsigned short port, const void * addr, unsigned long count) \
232 { __asm__ __volatile__ ("rep ; outs" #s \
233 : "=S" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
234 
235 #define RETURN_TYPE unsigned char
236 __IN(b,"")
237 #undef RETURN_TYPE
238 #define RETURN_TYPE unsigned short
239 __IN(w,"")
240 #undef RETURN_TYPE
241 #define RETURN_TYPE unsigned int
242 __IN(l,"")
243 #undef RETURN_TYPE
244 
245 #define inb(port)	_inb((uintptr_t)(port))
246 #define inw(port)	_inw((uintptr_t)(port))
247 #define inl(port)	_inl((uintptr_t)(port))
248 
249 __OUT(b,"b",char)
250 __OUT(w,"w",short)
251 __OUT(l,,int)
252 
253 #define outb(val, port)	_outb(val, (uintptr_t)(port))
254 #define outw(val, port)	_outw(val, (uintptr_t)(port))
255 #define outl(val, port)	_outl(val, (uintptr_t)(port))
256 
257 __INS(b)
258 __INS(w)
259 __INS(l)
260 
261 __OUTS(b)
262 __OUTS(w)
263 __OUTS(l)
264 
265 /* IO space accessors */
266 #define clrio(type, addr, clear) \
267 	out##type(in##type(addr) & ~(clear), (addr))
268 
269 #define setio(type, addr, set) \
270 	out##type(in##type(addr) | (set), (addr))
271 
272 #define clrsetio(type, addr, clear, set) \
273 	out##type((in##type(addr) & ~(clear)) | (set), (addr))
274 
275 #define clrio_32(addr, clear) clrio(l, addr, clear)
276 #define clrio_16(addr, clear) clrio(w, addr, clear)
277 #define clrio_8(addr, clear) clrio(b, addr, clear)
278 
279 #define setio_32(addr, set) setio(l, addr, set)
280 #define setio_16(addr, set) setio(w, addr, set)
281 #define setio_8(addr, set) setio(b, addr, set)
282 
283 #define clrsetio_32(addr, clear, set) clrsetio(l, addr, clear, set)
284 #define clrsetio_16(addr, clear, set) clrsetio(w, addr, clear, set)
285 #define clrsetio_8(addr, clear, set) clrsetio(b, addr, clear, set)
286 
287 static inline void sync(void)
288 {
289 }
290 
291 /*
292  * Given a physical address and a length, return a virtual address
293  * that can be used to access the memory range with the caching
294  * properties specified by "flags".
295  */
296 #define MAP_NOCACHE	(0)
297 #define MAP_WRCOMBINE	(0)
298 #define MAP_WRBACK	(0)
299 #define MAP_WRTHROUGH	(0)
300 
301 static inline void *
302 map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
303 {
304 	return (void *)(uintptr_t)paddr;
305 }
306 
307 /*
308  * Take down a mapping set up by map_physmem().
309  */
310 static inline void unmap_physmem(void *vaddr, unsigned long flags)
311 {
312 
313 }
314 
315 static inline phys_addr_t virt_to_phys(void * vaddr)
316 {
317 	return (phys_addr_t)(uintptr_t)(vaddr);
318 }
319 
320 /*
321  * TODO: The kernel offers some more advanced versions of barriers, it might
322  * have some advantages to use them instead of the simple one here.
323  */
324 #define dmb()		__asm__ __volatile__ ("" : : : "memory")
325 #define __iormb()	dmb()
326 #define __iowmb()	dmb()
327 
328 #endif
329