1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com> 4 */ 5 6/dts-v1/; 7 8#include <asm/arch-baytrail/fsp/fsp_configs.h> 9#include <dt-bindings/gpio/x86-gpio.h> 10#include <dt-bindings/interrupt-router/intel-irq.h> 11 12/include/ "skeleton.dtsi" 13/include/ "serial.dtsi" 14/include/ "rtc.dtsi" 15/include/ "tsc_timer.dtsi" 16/include/ "coreboot_fb.dtsi" 17 18/ { 19 model = "Intel Minnowboard Max"; 20 compatible = "intel,minnowmax", "intel,baytrail"; 21 22 aliases { 23 serial0 = &serial; 24 spi0 = &spi; 25 }; 26 27 config { 28 silent_console = <0>; 29 }; 30 31 pch_pinctrl { 32 compatible = "intel,x86-pinctrl"; 33 reg = <0 0>; 34 35 /* GPIO E0 */ 36 soc_gpio_s5_0@0 { 37 gpio-offset = <0x80 0>; 38 mode-gpio; 39 output-value = <0>; 40 direction = <PIN_OUTPUT>; 41 }; 42 43 /* GPIO E1 */ 44 soc_gpio_s5_1@0 { 45 gpio-offset = <0x80 1>; 46 mode-gpio; 47 output-value = <0>; 48 direction = <PIN_OUTPUT>; 49 }; 50 51 /* GPIO E2 */ 52 soc_gpio_s5_2@0 { 53 gpio-offset = <0x80 2>; 54 mode-gpio; 55 output-value = <0>; 56 direction = <PIN_OUTPUT>; 57 }; 58 59 pin_usb_host_en0@0 { 60 gpio-offset = <0x80 8>; 61 mode-gpio; 62 output-value = <1>; 63 direction = <PIN_OUTPUT>; 64 }; 65 66 pin_usb_host_en1@0 { 67 gpio-offset = <0x80 9>; 68 mode-gpio; 69 output-value = <1>; 70 direction = <PIN_OUTPUT>; 71 }; 72 73 /* 74 * As of today, the latest version FSP (gold4) for BayTrail 75 * misses the PAD configuration of the SD controller's Card 76 * Detect signal. The default PAD value for the CD pin sets 77 * the pin to work in GPIO mode, which causes card detect 78 * status cannot be reflected by the Present State register 79 * in the SD controller (bit 16 & bit 18 are always zero). 80 * 81 * Configure this pin to function 1 (SD controller). 82 */ 83 sdmmc3_cd@0 { 84 pad-offset = <0x3a0>; 85 mode-func = <1>; 86 }; 87 }; 88 89 chosen { 90 stdout-path = "/serial"; 91 }; 92 93 cpus { 94 #address-cells = <1>; 95 #size-cells = <0>; 96 97 cpu@0 { 98 device_type = "cpu"; 99 compatible = "intel,baytrail-cpu"; 100 reg = <0>; 101 intel,apic-id = <0>; 102 }; 103 104 cpu@1 { 105 device_type = "cpu"; 106 compatible = "intel,baytrail-cpu"; 107 reg = <1>; 108 intel,apic-id = <4>; 109 }; 110 111 }; 112 113 pci { 114 compatible = "intel,pci-baytrail", "pci-x86"; 115 #address-cells = <3>; 116 #size-cells = <2>; 117 u-boot,dm-pre-reloc; 118 ranges = <0x02000000 0x0 0x80000000 0x80000000 0 0x40000000 119 0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000 120 0x01000000 0x0 0x2000 0x2000 0 0xe000>; 121 122 pch@1f,0 { 123 reg = <0x0000f800 0 0 0 0>; 124 compatible = "pci8086,0f1c", "intel,pch9"; 125 #address-cells = <1>; 126 #size-cells = <1>; 127 128 irq-router { 129 compatible = "intel,irq-router"; 130 intel,pirq-config = "ibase"; 131 intel,ibase-offset = <0x50>; 132 intel,actl-addr = <0>; 133 intel,pirq-link = <8 8>; 134 intel,pirq-mask = <0xdee0>; 135 intel,pirq-routing = < 136 /* BayTrail PCI devices */ 137 PCI_BDF(0, 2, 0) INTA PIRQA 138 PCI_BDF(0, 3, 0) INTA PIRQA 139 PCI_BDF(0, 16, 0) INTA PIRQA 140 PCI_BDF(0, 17, 0) INTA PIRQA 141 PCI_BDF(0, 18, 0) INTA PIRQA 142 PCI_BDF(0, 19, 0) INTA PIRQA 143 PCI_BDF(0, 20, 0) INTA PIRQA 144 PCI_BDF(0, 21, 0) INTA PIRQA 145 PCI_BDF(0, 22, 0) INTA PIRQA 146 PCI_BDF(0, 23, 0) INTA PIRQA 147 PCI_BDF(0, 24, 0) INTA PIRQA 148 PCI_BDF(0, 24, 1) INTC PIRQC 149 PCI_BDF(0, 24, 2) INTD PIRQD 150 PCI_BDF(0, 24, 3) INTB PIRQB 151 PCI_BDF(0, 24, 4) INTA PIRQA 152 PCI_BDF(0, 24, 5) INTC PIRQC 153 PCI_BDF(0, 24, 6) INTD PIRQD 154 PCI_BDF(0, 24, 7) INTB PIRQB 155 PCI_BDF(0, 26, 0) INTA PIRQA 156 PCI_BDF(0, 27, 0) INTA PIRQA 157 PCI_BDF(0, 28, 0) INTA PIRQA 158 PCI_BDF(0, 28, 1) INTB PIRQB 159 PCI_BDF(0, 28, 2) INTC PIRQC 160 PCI_BDF(0, 28, 3) INTD PIRQD 161 PCI_BDF(0, 29, 0) INTA PIRQA 162 PCI_BDF(0, 30, 0) INTA PIRQA 163 PCI_BDF(0, 30, 1) INTD PIRQD 164 PCI_BDF(0, 30, 2) INTB PIRQB 165 PCI_BDF(0, 30, 3) INTC PIRQC 166 PCI_BDF(0, 30, 4) INTD PIRQD 167 PCI_BDF(0, 30, 5) INTB PIRQB 168 PCI_BDF(0, 31, 3) INTB PIRQB 169 170 /* 171 * PCIe root ports downstream 172 * interrupts 173 */ 174 PCI_BDF(1, 0, 0) INTA PIRQA 175 PCI_BDF(1, 0, 0) INTB PIRQB 176 PCI_BDF(1, 0, 0) INTC PIRQC 177 PCI_BDF(1, 0, 0) INTD PIRQD 178 PCI_BDF(2, 0, 0) INTA PIRQB 179 PCI_BDF(2, 0, 0) INTB PIRQC 180 PCI_BDF(2, 0, 0) INTC PIRQD 181 PCI_BDF(2, 0, 0) INTD PIRQA 182 PCI_BDF(3, 0, 0) INTA PIRQC 183 PCI_BDF(3, 0, 0) INTB PIRQD 184 PCI_BDF(3, 0, 0) INTC PIRQA 185 PCI_BDF(3, 0, 0) INTD PIRQB 186 PCI_BDF(4, 0, 0) INTA PIRQD 187 PCI_BDF(4, 0, 0) INTB PIRQA 188 PCI_BDF(4, 0, 0) INTC PIRQB 189 PCI_BDF(4, 0, 0) INTD PIRQC 190 >; 191 }; 192 193 spi: spi { 194 #address-cells = <1>; 195 #size-cells = <0>; 196 compatible = "intel,ich9-spi"; 197 spi-flash@0 { 198 #address-cells = <1>; 199 #size-cells = <1>; 200 reg = <0>; 201 compatible = "stmicro,n25q064a", 202 "spi-flash"; 203 memory-map = <0xff800000 0x00800000>; 204 rw-mrc-cache { 205 label = "rw-mrc-cache"; 206 reg = <0x006f0000 0x00010000>; 207 }; 208 }; 209 }; 210 211 gpioa { 212 compatible = "intel,ich6-gpio"; 213 u-boot,dm-pre-reloc; 214 reg = <0 0x20>; 215 bank-name = "A"; 216 use-lvl-write-cache; 217 }; 218 219 gpiob { 220 compatible = "intel,ich6-gpio"; 221 u-boot,dm-pre-reloc; 222 reg = <0x20 0x20>; 223 bank-name = "B"; 224 use-lvl-write-cache; 225 }; 226 227 gpioc { 228 compatible = "intel,ich6-gpio"; 229 u-boot,dm-pre-reloc; 230 reg = <0x40 0x20>; 231 bank-name = "C"; 232 use-lvl-write-cache; 233 }; 234 235 gpiod { 236 compatible = "intel,ich6-gpio"; 237 u-boot,dm-pre-reloc; 238 reg = <0x60 0x20>; 239 bank-name = "D"; 240 use-lvl-write-cache; 241 }; 242 243 gpioe { 244 compatible = "intel,ich6-gpio"; 245 u-boot,dm-pre-reloc; 246 reg = <0x80 0x20>; 247 bank-name = "E"; 248 use-lvl-write-cache; 249 }; 250 251 gpiof { 252 compatible = "intel,ich6-gpio"; 253 u-boot,dm-pre-reloc; 254 reg = <0xA0 0x20>; 255 bank-name = "F"; 256 use-lvl-write-cache; 257 }; 258 }; 259 }; 260 261 fsp { 262 compatible = "intel,baytrail-fsp"; 263 fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>; 264 fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>; 265 fsp,mrc-init-spd-addr1 = <0xa0>; 266 fsp,mrc-init-spd-addr2 = <0xa2>; 267 fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>; 268 fsp,enable-sdio; 269 fsp,enable-sdcard; 270 fsp,enable-hsuart1; 271 fsp,enable-spi; 272 fsp,enable-sata; 273 fsp,sata-mode = <SATA_MODE_AHCI>; 274#ifdef CONFIG_USB_XHCI_HCD 275 fsp,enable-xhci; 276#endif 277 fsp,lpe-mode = <LPE_MODE_PCI>; 278 fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>; 279 fsp,enable-dma0; 280 fsp,enable-dma1; 281 fsp,enable-i2c0; 282 fsp,enable-i2c1; 283 fsp,enable-i2c2; 284 fsp,enable-i2c3; 285 fsp,enable-i2c4; 286 fsp,enable-i2c5; 287 fsp,enable-i2c6; 288 fsp,enable-pwm0; 289 fsp,enable-pwm1; 290 fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>; 291 fsp,aperture-size = <APERTURE_SIZE_256MB>; 292 fsp,gtt-size = <GTT_SIZE_2MB>; 293 fsp,scc-mode = <SCC_MODE_PCI>; 294 fsp,os-selection = <OS_SELECTION_LINUX>; 295 fsp,emmc45-ddr50-enabled; 296 fsp,emmc45-retune-timer-value = <8>; 297 fsp,enable-igd; 298 fsp,enable-memory-down; 299 fsp,memory-down-params { 300 compatible = "intel,baytrail-fsp-mdp"; 301 fsp,dram-speed = <DRAM_SPEED_1066MTS>; 302 fsp,dram-type = <DRAM_TYPE_DDR3L>; 303 fsp,dimm-0-enable; 304 fsp,dimm-width = <DIMM_WIDTH_X16>; 305 fsp,dimm-density = <DIMM_DENSITY_4GBIT>; 306 fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>; 307 fsp,dimm-sides = <DIMM_SIDES_1RANKS>; 308 fsp,dimm-tcl = <0xb>; 309 fsp,dimm-trpt-rcd = <0xb>; 310 fsp,dimm-twr = <0xc>; 311 fsp,dimm-twtr = <6>; 312 fsp,dimm-trrd = <6>; 313 fsp,dimm-trtp = <6>; 314 fsp,dimm-tfaw = <0x14>; 315 }; 316 }; 317 318 microcode { 319 update@0 { 320#include "microcode/m0130673325.dtsi" 321 }; 322 update@1 { 323#include "microcode/m0130679907.dtsi" 324 }; 325 }; 326 327}; 328