1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com> 4 * Copyright (C) 2016 Stefan Roese <sr@denx.de> 5 */ 6 7#include <asm/arch-baytrail/fsp/fsp_configs.h> 8#include <dt-bindings/gpio/x86-gpio.h> 9#include <dt-bindings/interrupt-router/intel-irq.h> 10 11#include "skeleton.dtsi" 12#include "reset.dtsi" 13#include "rtc.dtsi" 14#include "tsc_timer.dtsi" 15 16/ { 17 config { 18 silent_console = <0>; 19 }; 20 21 pch_pinctrl { 22 compatible = "intel,x86-pinctrl"; 23 reg = <0 0>; 24 25 /* Add UART1 PAD configuration (SIO HS-UART) */ 26 uart1_txd@0 { 27 pad-offset = <0x10>; 28 mode-func = <1>; 29 }; 30 31 uart1_rxd@0 { 32 pad-offset = <0x20>; 33 mode-func = <1>; 34 }; 35 36 /* 37 * As of today, the latest version FSP (gold4) for BayTrail 38 * misses the PAD configuration of the SD controller's Card 39 * Detect signal. The default PAD value for the CD pin sets 40 * the pin to work in GPIO mode, which causes card detect 41 * status cannot be reflected by the Present State register 42 * in the SD controller (bit 16 & bit 18 are always zero). 43 * 44 * Configure this pin to function 1 (SD controller). 45 */ 46 sdmmc3_cd@0 { 47 pad-offset = <0x3a0>; 48 mode-func = <1>; 49 }; 50 51 xhci_hub_reset: usb_ulpi_stp@0 { 52 gpio-offset = <0xa0 10>; 53 pad-offset = <0x23b0>; 54 mode-func = <0>; 55 mode-gpio; 56 output-value = <1>; 57 direction = <PIN_OUTPUT>; 58 }; 59 }; 60 61 chosen { 62 stdout-path = "/serial"; 63 }; 64 65 cpus { 66 #address-cells = <1>; 67 #size-cells = <0>; 68 69 cpu@0 { 70 device_type = "cpu"; 71 compatible = "intel,baytrail-cpu"; 72 reg = <0>; 73 intel,apic-id = <0>; 74 }; 75 76 cpu@1 { 77 device_type = "cpu"; 78 compatible = "intel,baytrail-cpu"; 79 reg = <1>; 80 intel,apic-id = <2>; 81 }; 82 83 cpu@2 { 84 device_type = "cpu"; 85 compatible = "intel,baytrail-cpu"; 86 reg = <2>; 87 intel,apic-id = <4>; 88 }; 89 90 cpu@3 { 91 device_type = "cpu"; 92 compatible = "intel,baytrail-cpu"; 93 reg = <3>; 94 intel,apic-id = <6>; 95 }; 96 }; 97 98 pci { 99 compatible = "intel,pci-baytrail", "pci-x86"; 100 #address-cells = <3>; 101 #size-cells = <2>; 102 u-boot,dm-pre-reloc; 103 ranges = <0x02000000 0x0 0x80000000 0x80000000 0 0x40000000 104 0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000 105 0x01000000 0x0 0x2000 0x2000 0 0xe000>; 106 107 pciuart0: uart@1e,3 { 108 compatible = "pci8086,0f0a.00", 109 "pci8086,0f0a", 110 "pciclass,070002", 111 "pciclass,0700", 112 "ns16550"; 113 u-boot,dm-pre-reloc; 114 reg = <0x0200f310 0x0 0x0 0x0 0x0>; 115 reg-shift = <2>; 116 clock-frequency = <58982400>; 117 current-speed = <115200>; 118 }; 119 120 pch@1f,0 { 121 reg = <0x0000f800 0 0 0 0>; 122 compatible = "pci8086,0f1c", "intel,pch9"; 123 #address-cells = <1>; 124 #size-cells = <1>; 125 126 irq-router { 127 compatible = "intel,irq-router"; 128 intel,pirq-config = "ibase"; 129 intel,ibase-offset = <0x50>; 130 intel,actl-addr = <0>; 131 intel,pirq-link = <8 8>; 132 intel,pirq-mask = <0xdee0>; 133 intel,pirq-routing = < 134 /* BayTrail PCI devices */ 135 PCI_BDF(0, 2, 0) INTA PIRQA 136 PCI_BDF(0, 3, 0) INTA PIRQA 137 PCI_BDF(0, 16, 0) INTA PIRQA 138 PCI_BDF(0, 17, 0) INTA PIRQA 139 PCI_BDF(0, 18, 0) INTA PIRQA 140 PCI_BDF(0, 19, 0) INTA PIRQA 141 PCI_BDF(0, 20, 0) INTA PIRQA 142 PCI_BDF(0, 21, 0) INTA PIRQA 143 PCI_BDF(0, 22, 0) INTA PIRQA 144 PCI_BDF(0, 23, 0) INTA PIRQA 145 PCI_BDF(0, 24, 0) INTA PIRQA 146 PCI_BDF(0, 24, 1) INTC PIRQC 147 PCI_BDF(0, 24, 2) INTD PIRQD 148 PCI_BDF(0, 24, 3) INTB PIRQB 149 PCI_BDF(0, 24, 4) INTA PIRQA 150 PCI_BDF(0, 24, 5) INTC PIRQC 151 PCI_BDF(0, 24, 6) INTD PIRQD 152 PCI_BDF(0, 24, 7) INTB PIRQB 153 PCI_BDF(0, 26, 0) INTA PIRQA 154 PCI_BDF(0, 27, 0) INTA PIRQA 155 PCI_BDF(0, 28, 0) INTA PIRQA 156 PCI_BDF(0, 28, 1) INTB PIRQB 157 PCI_BDF(0, 28, 2) INTC PIRQC 158 PCI_BDF(0, 28, 3) INTD PIRQD 159 PCI_BDF(0, 29, 0) INTA PIRQA 160 PCI_BDF(0, 30, 0) INTA PIRQA 161 PCI_BDF(0, 30, 1) INTD PIRQD 162 PCI_BDF(0, 30, 2) INTB PIRQB 163 PCI_BDF(0, 30, 3) INTC PIRQC 164 PCI_BDF(0, 30, 4) INTD PIRQD 165 PCI_BDF(0, 30, 5) INTB PIRQB 166 PCI_BDF(0, 31, 3) INTB PIRQB 167 168 /* 169 * PCIe root ports downstream 170 * interrupts 171 */ 172 PCI_BDF(1, 0, 0) INTA PIRQA 173 PCI_BDF(1, 0, 0) INTB PIRQB 174 PCI_BDF(1, 0, 0) INTC PIRQC 175 PCI_BDF(1, 0, 0) INTD PIRQD 176 PCI_BDF(2, 0, 0) INTA PIRQB 177 PCI_BDF(2, 0, 0) INTB PIRQC 178 PCI_BDF(2, 0, 0) INTC PIRQD 179 PCI_BDF(2, 0, 0) INTD PIRQA 180 PCI_BDF(3, 0, 0) INTA PIRQC 181 PCI_BDF(3, 0, 0) INTB PIRQD 182 PCI_BDF(3, 0, 0) INTC PIRQA 183 PCI_BDF(3, 0, 0) INTD PIRQB 184 PCI_BDF(4, 0, 0) INTA PIRQD 185 PCI_BDF(4, 0, 0) INTB PIRQA 186 PCI_BDF(4, 0, 0) INTC PIRQB 187 PCI_BDF(4, 0, 0) INTD PIRQC 188 >; 189 }; 190 191 spi: spi { 192 #address-cells = <1>; 193 #size-cells = <0>; 194 compatible = "intel,ich9-spi"; 195 spi-flash@0 { 196 #address-cells = <1>; 197 #size-cells = <1>; 198 reg = <0>; 199 compatible = "stmicro,n25q064a", 200 "spi-flash"; 201 memory-map = <0xff800000 0x00800000>; 202 rw-mrc-cache { 203 label = "rw-mrc-cache"; 204 reg = <0x006f0000 0x00010000>; 205 }; 206 }; 207 }; 208 209 gpioa { 210 compatible = "intel,ich6-gpio"; 211 u-boot,dm-pre-reloc; 212 reg = <0 0x20>; 213 bank-name = "A"; 214 use-lvl-write-cache; 215 }; 216 217 gpiob { 218 compatible = "intel,ich6-gpio"; 219 u-boot,dm-pre-reloc; 220 reg = <0x20 0x20>; 221 bank-name = "B"; 222 use-lvl-write-cache; 223 }; 224 225 gpioc { 226 compatible = "intel,ich6-gpio"; 227 u-boot,dm-pre-reloc; 228 reg = <0x40 0x20>; 229 bank-name = "C"; 230 use-lvl-write-cache; 231 }; 232 233 gpiod { 234 compatible = "intel,ich6-gpio"; 235 u-boot,dm-pre-reloc; 236 reg = <0x60 0x20>; 237 bank-name = "D"; 238 use-lvl-write-cache; 239 }; 240 241 gpioe { 242 compatible = "intel,ich6-gpio"; 243 u-boot,dm-pre-reloc; 244 reg = <0x80 0x20>; 245 bank-name = "E"; 246 use-lvl-write-cache; 247 }; 248 249 gpiof { 250 compatible = "intel,ich6-gpio"; 251 u-boot,dm-pre-reloc; 252 reg = <0xA0 0x20>; 253 bank-name = "F"; 254 use-lvl-write-cache; 255 }; 256 }; 257 }; 258 259 fsp { 260 compatible = "intel,baytrail-fsp"; 261 fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>; 262 fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>; 263 fsp,mrc-init-spd-addr1 = <0xa0>; 264 fsp,mrc-init-spd-addr2 = <0xa2>; 265 fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>; 266 fsp,enable-sdio; 267 fsp,enable-sdcard; 268 fsp,enable-hsuart0; 269 fsp,enable-hsuart1; 270 fsp,enable-spi; 271 fsp,enable-sata; 272 fsp,sata-mode = <SATA_MODE_AHCI>; 273#ifdef CONFIG_USB_XHCI_HCD 274 fsp,enable-xhci; 275#endif 276 fsp,lpe-mode = <LPE_MODE_PCI>; 277 fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>; 278 fsp,enable-dma0; 279 fsp,enable-dma1; 280 fsp,enable-i2c0; 281 fsp,enable-i2c1; 282 fsp,enable-i2c2; 283 fsp,enable-i2c3; 284 fsp,enable-i2c4; 285 fsp,enable-i2c5; 286 fsp,enable-i2c6; 287 fsp,enable-pwm0; 288 fsp,enable-pwm1; 289 fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>; 290 fsp,aperture-size = <APERTURE_SIZE_256MB>; 291 fsp,gtt-size = <GTT_SIZE_2MB>; 292 fsp,scc-mode = <SCC_MODE_PCI>; 293 fsp,os-selection = <OS_SELECTION_LINUX>; 294 fsp,emmc45-ddr50-enabled; 295 fsp,emmc45-retune-timer-value = <8>; 296 fsp,enable-igd; 297 fsp,enable-memory-down; 298 fsp,memory-down-params { 299 compatible = "intel,baytrail-fsp-mdp"; 300 fsp,dram-speed = <DRAM_SPEED_1333MTS>; 301 fsp,dram-type = <DRAM_TYPE_DDR3L>; 302 fsp,dimm-0-enable; 303 fsp,dimm-width = <DIMM_WIDTH_X16>; 304 fsp,dimm-density = <DIMM_DENSITY_8GBIT>; 305 fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>; 306 fsp,dimm-sides = <DIMM_SIDES_1RANKS>; 307 308 /* These following values might need a re-visit */ 309 fsp,dimm-tcl = <8>; 310 fsp,dimm-trpt-rcd = <8>; 311 fsp,dimm-twr = <8>; 312 fsp,dimm-twtr = <4>; 313 fsp,dimm-trrd = <6>; 314 fsp,dimm-trtp = <4>; 315 fsp,dimm-tfaw = <22>; 316 }; 317 }; 318 319 microcode { 320 update@0 { 321#include "microcode/m0130673325.dtsi" 322 }; 323 update@1 { 324#include "microcode/m0130679907.dtsi" 325 }; 326 }; 327}; 328