xref: /openbmc/u-boot/arch/x86/cpu/start16.S (revision 0b304a24)
1/*
2 *  U-boot - x86 Startup Code
3 *
4 * (C) Copyright 2008-2011
5 * Graeme Russ, <graeme.russ@gmail.com>
6 *
7 * (C) Copyright 2002,2003
8 * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
9 *
10 * SPDX-License-Identifier:	GPL-2.0+
11 */
12
13#include <asm/global_data.h>
14#include <asm/processor-flags.h>
15
16#define BOOT_SEG	0xffff0000	/* linear segment of boot code */
17#define a32		.byte 0x67;
18#define o32		.byte 0x66;
19
20.section .start16, "ax"
21.code16
22.globl start16
23start16:
24	/* Set the Cold Boot / Hard Reset flag */
25	movl	$GD_FLG_COLD_BOOT, %ebx
26
27	/*
28	 * First we let the BSP do some early initialization
29	 * this code have to map the flash to its final position
30	 */
31	jmp	board_init16
32.globl board_init16_ret
33board_init16_ret:
34
35	/* Turn of cache (this might require a 486-class CPU) */
36	movl	%cr0, %eax
37	orl	$(X86_CR0_NW | X86_CR0_CD), %eax
38	movl	%eax, %cr0
39	wbinvd
40
41	/* load the temporary Global Descriptor Table */
42o32 cs	lidt	idt_ptr
43o32 cs	lgdt	gdt_ptr
44
45	/* Now, we enter protected mode */
46	movl	%cr0, %eax
47	orl	$X86_CR0_PE, %eax
48	movl	%eax, %cr0
49
50	/* Flush the prefetch queue */
51	jmp	ff
52ff:
53	/* Finally jump to the 32bit initialization code */
54	movw	$code32start, %ax
55	movw	%ax, %bp
56o32 cs	ljmp	*(%bp)
57
58	/* 48-bit far pointer */
59code32start:
60	.long	_start		/* offset */
61	.word	0x10		/* segment */
62
63idt_ptr:
64	.word	0		/* limit */
65	.long	0		/* base */
66
67/*
68 * The following Global Descriptor Table is just enough to get us into
69 * 'Flat Protected Mode' - It will be discarded as soon as the final
70 * GDT is setup in a safe location in RAM
71 */
72gdt_ptr:
73	.word	0x20		/* limit (32 bytes = 4 GDT entries) */
74	.long	BOOT_SEG + gdt	/* base */
75
76/* Some CPUs are picky about GDT alignment... */
77.align 16
78gdt:
79	/*
80	 * The GDT table ...
81	 *
82	 *	 Selector	Type
83	 *	 0x00		NULL
84	 *	 0x08		Unused
85	 *	 0x10		32bit code
86	 *	 0x18		32bit data/stack
87	 */
88	/* The NULL Desciptor - Mandatory */
89	.word	0x0000		/* limit_low */
90	.word	0x0000		/* base_low */
91	.byte	0x00		/* base_middle */
92	.byte	0x00		/* access */
93	.byte	0x00		/* flags + limit_high */
94	.byte	0x00		/* base_high */
95
96	/* Unused Desciptor - (matches Linux) */
97	.word	0x0000		/* limit_low */
98	.word	0x0000		/* base_low */
99	.byte	0x00		/* base_middle */
100	.byte	0x00		/* access */
101	.byte	0x00		/* flags + limit_high */
102	.byte	0x00		/* base_high */
103
104	/*
105	 * The Code Segment Descriptor:
106	 * - Base   = 0x00000000
107	 * - Size   = 4GB
108	 * - Access = Present, Ring 0, Exec (Code), Readable
109	 * - Flags  = 4kB Granularity, 32-bit
110	 */
111	.word	0xffff		/* limit_low */
112	.word	0x0000		/* base_low */
113	.byte	0x00		/* base_middle */
114	.byte	0x9b		/* access */
115	.byte	0xcf		/* flags + limit_high */
116	.byte	0x00		/* base_high */
117
118	/*
119	 * The Data Segment Descriptor:
120	 * - Base   = 0x00000000
121	 * - Size   = 4GB
122	 * - Access = Present, Ring 0, Non-Exec (Data), Writable
123	 * - Flags  = 4kB Granularity, 32-bit
124	 */
125	.word	0xffff		/* limit_low */
126	.word	0x0000		/* base_low */
127	.byte	0x00		/* base_middle */
128	.byte	0x93		/* access */
129	.byte	0xcf		/* flags + limit_high */
130	.byte	0x00		/* base_high */
131