1# 2# Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com> 3# 4# SPDX-License-Identifier: GPL-2.0+ 5# 6 7config INTEL_QUEENSBAY 8 bool 9 select HAVE_FSP 10 select HAVE_CMC 11 select ARCH_EARLY_INIT_R 12 imply ENV_IS_IN_SPI_FLASH 13 imply AHCI_PCI 14 imply ICH_SPI 15 imply INTEL_ICH6_GPIO 16 imply MMC 17 imply MMC_PCI 18 imply MMC_SDHCI 19 imply MMC_SDHCI_SDMA 20 imply PCH_GBE 21 imply SCSI 22 imply SPI_FLASH 23 imply SYS_NS16550 24 imply USB 25 imply USB_EHCI_HCD 26 imply VIDEO_VESA 27 28if INTEL_QUEENSBAY 29 30config HAVE_CMC 31 bool "Add a Chipset Micro Code state machine binary" 32 help 33 Select this option to add a Chipset Micro Code state machine binary 34 to the resulting U-Boot image. It is a 64K data block of machine 35 specific code which must be put in the flash for the processor to 36 access when powered up before system BIOS is executed. 37 38config CMC_FILE 39 string "Chipset Micro Code state machine filename" 40 depends on HAVE_CMC 41 default "cmc.bin" 42 help 43 The filename of the file to use as Chipset Micro Code state machine 44 binary in the board directory. 45 46config CMC_ADDR 47 hex "Chipset Micro Code state machine binary location" 48 depends on HAVE_CMC 49 default 0xfffb0000 50 help 51 The location of the CMC binary is determined by a strap. It must be 52 put in flash at a location matching the strap-determined base address. 53 54 The default base address of 0xfffb0000 indicates that the binary must 55 be located at offset 0xb0000 from the beginning of a 1MB flash device. 56 57config CPU_ADDR_BITS 58 int 59 default 32 60 61config DISABLE_IGD 62 bool "Disable Integrated Graphics Device (IGD)" 63 help 64 Disable the Integrated Graphics Device (IGD) so that it does not 65 show in the PCI configuration space as a VGA disaplay controller. 66 This gives a chance for U-Boot to run PCI/PCIe based graphics 67 card's VGA BIOS and use that card for the graphics console. 68 69endif 70