1 /* 2 * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <mmc.h> 9 #include <asm/io.h> 10 #include <asm/ioapic.h> 11 #include <asm/mrccache.h> 12 #include <asm/mtrr.h> 13 #include <asm/pci.h> 14 #include <asm/post.h> 15 #include <asm/arch/device.h> 16 #include <asm/arch/msg_port.h> 17 #include <asm/arch/quark.h> 18 19 static struct pci_device_id mmc_supported[] = { 20 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_SDIO }, 21 {}, 22 }; 23 24 static void quark_setup_mtrr(void) 25 { 26 u32 base, mask; 27 int i; 28 29 disable_caches(); 30 31 /* mark the VGA RAM area as uncacheable */ 32 msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_A0000, 33 MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE)); 34 msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_B0000, 35 MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE)); 36 37 /* mark other fixed range areas as cacheable */ 38 msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_64K_00000, 39 MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); 40 msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_64K_40000, 41 MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); 42 msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_80000, 43 MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); 44 msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_90000, 45 MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); 46 for (i = MTRR_FIX_4K_C0000; i <= MTRR_FIX_4K_FC000; i++) 47 msg_port_write(MSG_PORT_HOST_BRIDGE, i, 48 MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); 49 50 /* variable range MTRR#0: ROM area */ 51 mask = ~(CONFIG_SYS_MONITOR_LEN - 1); 52 base = CONFIG_SYS_TEXT_BASE & mask; 53 msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYBASE(MTRR_VAR_ROM), 54 base | MTRR_TYPE_WRBACK); 55 msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYMASK(MTRR_VAR_ROM), 56 mask | MTRR_PHYS_MASK_VALID); 57 58 /* variable range MTRR#1: eSRAM area */ 59 mask = ~(ESRAM_SIZE - 1); 60 base = CONFIG_ESRAM_BASE & mask; 61 msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYBASE(MTRR_VAR_ESRAM), 62 base | MTRR_TYPE_WRBACK); 63 msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYMASK(MTRR_VAR_ESRAM), 64 mask | MTRR_PHYS_MASK_VALID); 65 66 /* enable both variable and fixed range MTRRs */ 67 msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_DEF_TYPE, 68 MTRR_DEF_TYPE_EN | MTRR_DEF_TYPE_FIX_EN); 69 70 enable_caches(); 71 } 72 73 static void quark_setup_bars(void) 74 { 75 /* GPIO - D31:F0:R44h */ 76 qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GBA, 77 CONFIG_GPIO_BASE | IO_BAR_EN); 78 79 /* ACPI PM1 Block - D31:F0:R48h */ 80 qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_PM1BLK, 81 CONFIG_ACPI_PM1_BASE | IO_BAR_EN); 82 83 /* GPE0 - D31:F0:R4Ch */ 84 qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GPE0BLK, 85 CONFIG_ACPI_GPE0_BASE | IO_BAR_EN); 86 87 /* WDT - D31:F0:R84h */ 88 qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_WDTBA, 89 CONFIG_WDT_BASE | IO_BAR_EN); 90 91 /* RCBA - D31:F0:RF0h */ 92 qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, 93 CONFIG_RCBA_BASE | MEM_BAR_EN); 94 95 /* ACPI P Block - Msg Port 04:R70h */ 96 msg_port_write(MSG_PORT_RMU, PBLK_BA, 97 CONFIG_ACPI_PBLK_BASE | IO_BAR_EN); 98 99 /* SPI DMA - Msg Port 04:R7Ah */ 100 msg_port_write(MSG_PORT_RMU, SPI_DMA_BA, 101 CONFIG_SPI_DMA_BASE | IO_BAR_EN); 102 103 /* PCIe ECAM */ 104 msg_port_write(MSG_PORT_MEM_ARBITER, AEC_CTRL, 105 CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN); 106 msg_port_write(MSG_PORT_HOST_BRIDGE, HEC_REG, 107 CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN); 108 } 109 110 static void quark_pcie_early_init(void) 111 { 112 /* 113 * Step1: Assert PCIe signal PERST# 114 * 115 * The CPU interface to the PERST# signal is platform dependent. 116 * Call the board-specific codes to perform this task. 117 */ 118 board_assert_perst(); 119 120 /* Step2: PHY common lane reset */ 121 msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_PHY_LANE_RST); 122 /* wait 1 ms for PHY common lane reset */ 123 mdelay(1); 124 125 /* Step3: PHY sideband interface reset and controller main reset */ 126 msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, 127 PCIE_PHY_SB_RST | PCIE_CTLR_MAIN_RST); 128 /* wait 80ms for PLL to lock */ 129 mdelay(80); 130 131 /* Step4: Controller sideband interface reset */ 132 msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_CTLR_SB_RST); 133 /* wait 20ms for controller sideband interface reset */ 134 mdelay(20); 135 136 /* Step5: De-assert PERST# */ 137 board_deassert_perst(); 138 139 /* Step6: Controller primary interface reset */ 140 msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_CTLR_PRI_RST); 141 142 /* Mixer Load Lane 0 */ 143 msg_port_io_clrbits(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L0, 144 (1 << 6) | (1 << 7)); 145 146 /* Mixer Load Lane 1 */ 147 msg_port_io_clrbits(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L1, 148 (1 << 6) | (1 << 7)); 149 } 150 151 static void quark_usb_early_init(void) 152 { 153 /* The sequence below comes from Quark firmware writer guide */ 154 155 msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_GLOBAL_PORT, 156 1 << 1, (1 << 6) | (1 << 7)); 157 158 msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_COMPBG, 159 (1 << 8) | (1 << 9), (1 << 7) | (1 << 10)); 160 161 msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 29); 162 163 msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL1, 1 << 1); 164 165 msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_PLL1, 166 (1 << 3) | (1 << 4) | (1 << 5), 1 << 6); 167 168 msg_port_alt_clrbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 29); 169 170 msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 24); 171 } 172 173 static void quark_thermal_early_init(void) 174 { 175 /* The sequence below comes from Quark firmware writer guide */ 176 177 /* thermal sensor mode config */ 178 msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG1, 179 (1 << 3) | (1 << 4) | (1 << 5), 1 << 5); 180 msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG1, 181 (1 << 8) | (1 << 9) | (1 << 10) | (1 << 11) | 182 (1 << 12), 1 << 9); 183 msg_port_alt_setbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 14); 184 msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 17); 185 msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 18); 186 msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG2, 0xffff, 0x011f); 187 msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG3, 0xff, 0x17); 188 msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG3, 189 (1 << 8) | (1 << 9), 1 << 8); 190 msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG3, 0xff000000); 191 msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG4, 192 0x7ff800, 0xc8 << 11); 193 194 /* thermal monitor catastrophic trip set point (105 celsius) */ 195 msg_port_clrsetbits(MSG_PORT_RMU, TS_TRIP, 0xff, 155); 196 197 /* thermal monitor catastrophic trip clear point (0 celsius) */ 198 msg_port_clrsetbits(MSG_PORT_RMU, TS_TRIP, 0xff0000, 50 << 16); 199 200 /* take thermal sensor out of reset */ 201 msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG4, 1 << 0); 202 203 /* enable thermal monitor */ 204 msg_port_setbits(MSG_PORT_RMU, TS_MODE, 1 << 15); 205 206 /* lock all thermal configuration */ 207 msg_port_setbits(MSG_PORT_RMU, RMU_CTRL, (1 << 5) | (1 << 6)); 208 } 209 210 static void quark_enable_legacy_seg(void) 211 { 212 msg_port_setbits(MSG_PORT_HOST_BRIDGE, HMISC2, 213 HMISC2_SEGE | HMISC2_SEGF | HMISC2_SEGAB); 214 } 215 216 int arch_cpu_init(void) 217 { 218 int ret; 219 220 post_code(POST_CPU_INIT); 221 222 ret = x86_cpu_init_f(); 223 if (ret) 224 return ret; 225 226 /* 227 * Quark SoC does not support MSR MTRRs. Fixed and variable range MTRRs 228 * are accessed indirectly via the message port and not the traditional 229 * MSR mechanism. Only UC, WT and WB cache types are supported. 230 */ 231 quark_setup_mtrr(); 232 233 /* 234 * Quark SoC has some non-standard BARs (excluding PCI standard BARs) 235 * which need be initialized with suggested values 236 */ 237 quark_setup_bars(); 238 239 /* Initialize USB2 PHY */ 240 quark_usb_early_init(); 241 242 /* Initialize thermal sensor */ 243 quark_thermal_early_init(); 244 245 /* Turn on legacy segments (A/B/E/F) decode to system RAM */ 246 quark_enable_legacy_seg(); 247 248 return 0; 249 } 250 251 int arch_cpu_init_dm(void) 252 { 253 /* 254 * Initialize PCIe controller 255 * 256 * Quark SoC holds the PCIe controller in reset following a power on. 257 * U-Boot needs to release the PCIe controller from reset. The PCIe 258 * controller (D23:F0/F1) will not be visible in PCI configuration 259 * space and any access to its PCI configuration registers will cause 260 * system hang while it is held in reset. 261 */ 262 quark_pcie_early_init(); 263 264 return 0; 265 } 266 267 int checkcpu(void) 268 { 269 return 0; 270 } 271 272 int print_cpuinfo(void) 273 { 274 post_code(POST_CPU_INFO); 275 return default_print_cpuinfo(); 276 } 277 278 void reset_cpu(ulong addr) 279 { 280 /* cold reset */ 281 x86_full_reset(); 282 } 283 284 static void quark_pcie_init(void) 285 { 286 u32 val; 287 288 /* PCIe upstream non-posted & posted request size */ 289 qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_CCFG, 290 CCFG_UPRS | CCFG_UNRS); 291 qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_CCFG, 292 CCFG_UPRS | CCFG_UNRS); 293 294 /* PCIe packet fast transmit mode (IPF) */ 295 qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MPC2, MPC2_IPF); 296 qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MPC2, MPC2_IPF); 297 298 /* PCIe message bus idle counter (SBIC) */ 299 qrk_pci_read_config_dword(QUARK_PCIE0, PCIE_RP_MBC, &val); 300 val |= MBC_SBIC; 301 qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MBC, val); 302 qrk_pci_read_config_dword(QUARK_PCIE1, PCIE_RP_MBC, &val); 303 val |= MBC_SBIC; 304 qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MBC, val); 305 } 306 307 static void quark_usb_init(void) 308 { 309 u32 bar; 310 311 /* Change USB EHCI packet buffer OUT/IN threshold */ 312 qrk_pci_read_config_dword(QUARK_USB_EHCI, PCI_BASE_ADDRESS_0, &bar); 313 writel((0x7f << 16) | 0x7f, bar + EHCI_INSNREG01); 314 315 /* Disable USB device interrupts */ 316 qrk_pci_read_config_dword(QUARK_USB_DEVICE, PCI_BASE_ADDRESS_0, &bar); 317 writel(0x7f, bar + USBD_INT_MASK); 318 writel((0xf << 16) | 0xf, bar + USBD_EP_INT_MASK); 319 writel((0xf << 16) | 0xf, bar + USBD_EP_INT_STS); 320 } 321 322 int arch_early_init_r(void) 323 { 324 quark_pcie_init(); 325 326 quark_usb_init(); 327 328 return 0; 329 } 330 331 int cpu_mmc_init(bd_t *bis) 332 { 333 return pci_mmc_init("Quark SDHCI", mmc_supported); 334 } 335 336 int arch_misc_init(void) 337 { 338 #ifdef CONFIG_ENABLE_MRC_CACHE 339 /* 340 * We intend not to check any return value here, as even MRC cache 341 * is not saved successfully, it is not a severe error that will 342 * prevent system from continuing to boot. 343 */ 344 mrccache_save(); 345 #endif 346 347 /* Assign a unique I/O APIC ID */ 348 io_apic_set_id(1); 349 350 return 0; 351 } 352 353 void board_final_cleanup(void) 354 { 355 struct quark_rcba *rcba; 356 u32 base, val; 357 358 qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, &base); 359 base &= ~MEM_BAR_EN; 360 rcba = (struct quark_rcba *)base; 361 362 /* Initialize 'Component ID' to zero */ 363 val = readl(&rcba->esd); 364 val &= ~0xff0000; 365 writel(val, &rcba->esd); 366 367 /* Lock HMBOUND for security */ 368 msg_port_setbits(MSG_PORT_HOST_BRIDGE, HM_BOUND, HM_BOUND_LOCK); 369 370 return; 371 } 372