xref: /openbmc/u-boot/arch/x86/cpu/quark/quark.c (revision ad5b5801)
1 /*
2  * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <mmc.h>
9 #include <asm/io.h>
10 #include <asm/mrccache.h>
11 #include <asm/mtrr.h>
12 #include <asm/pci.h>
13 #include <asm/post.h>
14 #include <asm/arch/device.h>
15 #include <asm/arch/msg_port.h>
16 #include <asm/arch/quark.h>
17 
18 static struct pci_device_id mmc_supported[] = {
19 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_SDIO },
20 	{},
21 };
22 
23 static void quark_setup_mtrr(void)
24 {
25 	u32 base, mask;
26 	int i;
27 
28 	disable_caches();
29 
30 	/* mark the VGA RAM area as uncacheable */
31 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_A0000,
32 		       MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE));
33 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_B0000,
34 		       MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE));
35 
36 	/* mark other fixed range areas as cacheable */
37 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_64K_00000,
38 		       MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
39 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_64K_40000,
40 		       MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
41 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_80000,
42 		       MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
43 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_90000,
44 		       MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
45 	for (i = MTRR_FIX_4K_C0000; i <= MTRR_FIX_4K_FC000; i++)
46 		msg_port_write(MSG_PORT_HOST_BRIDGE, i,
47 			       MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
48 
49 	/* variable range MTRR#0: ROM area */
50 	mask = ~(CONFIG_SYS_MONITOR_LEN - 1);
51 	base = CONFIG_SYS_TEXT_BASE & mask;
52 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYBASE(MTRR_VAR_ROM),
53 		       base | MTRR_TYPE_WRBACK);
54 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYMASK(MTRR_VAR_ROM),
55 		       mask | MTRR_PHYS_MASK_VALID);
56 
57 	/* variable range MTRR#1: eSRAM area */
58 	mask = ~(ESRAM_SIZE - 1);
59 	base = CONFIG_ESRAM_BASE & mask;
60 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYBASE(MTRR_VAR_ESRAM),
61 		       base | MTRR_TYPE_WRBACK);
62 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYMASK(MTRR_VAR_ESRAM),
63 		       mask | MTRR_PHYS_MASK_VALID);
64 
65 	/* enable both variable and fixed range MTRRs */
66 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_DEF_TYPE,
67 		       MTRR_DEF_TYPE_EN | MTRR_DEF_TYPE_FIX_EN);
68 
69 	enable_caches();
70 }
71 
72 static void quark_setup_bars(void)
73 {
74 	/* GPIO - D31:F0:R44h */
75 	qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GBA,
76 				   CONFIG_GPIO_BASE | IO_BAR_EN);
77 
78 	/* ACPI PM1 Block - D31:F0:R48h */
79 	qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_PM1BLK,
80 				   CONFIG_ACPI_PM1_BASE | IO_BAR_EN);
81 
82 	/* GPE0 - D31:F0:R4Ch */
83 	qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GPE0BLK,
84 				   CONFIG_ACPI_GPE0_BASE | IO_BAR_EN);
85 
86 	/* WDT - D31:F0:R84h */
87 	qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_WDTBA,
88 				   CONFIG_WDT_BASE | IO_BAR_EN);
89 
90 	/* RCBA - D31:F0:RF0h */
91 	qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA,
92 				   CONFIG_RCBA_BASE | MEM_BAR_EN);
93 
94 	/* ACPI P Block - Msg Port 04:R70h */
95 	msg_port_write(MSG_PORT_RMU, PBLK_BA,
96 		       CONFIG_ACPI_PBLK_BASE | IO_BAR_EN);
97 
98 	/* SPI DMA - Msg Port 04:R7Ah */
99 	msg_port_write(MSG_PORT_RMU, SPI_DMA_BA,
100 		       CONFIG_SPI_DMA_BASE | IO_BAR_EN);
101 
102 	/* PCIe ECAM */
103 	msg_port_write(MSG_PORT_MEM_ARBITER, AEC_CTRL,
104 		       CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN);
105 	msg_port_write(MSG_PORT_HOST_BRIDGE, HEC_REG,
106 		       CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN);
107 }
108 
109 static void quark_pcie_early_init(void)
110 {
111 	/*
112 	 * Step1: Assert PCIe signal PERST#
113 	 *
114 	 * The CPU interface to the PERST# signal is platform dependent.
115 	 * Call the board-specific codes to perform this task.
116 	 */
117 	board_assert_perst();
118 
119 	/* Step2: PHY common lane reset */
120 	msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_PHY_LANE_RST);
121 	/* wait 1 ms for PHY common lane reset */
122 	mdelay(1);
123 
124 	/* Step3: PHY sideband interface reset and controller main reset */
125 	msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG,
126 			     PCIE_PHY_SB_RST | PCIE_CTLR_MAIN_RST);
127 	/* wait 80ms for PLL to lock */
128 	mdelay(80);
129 
130 	/* Step4: Controller sideband interface reset */
131 	msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_CTLR_SB_RST);
132 	/* wait 20ms for controller sideband interface reset */
133 	mdelay(20);
134 
135 	/* Step5: De-assert PERST# */
136 	board_deassert_perst();
137 
138 	/* Step6: Controller primary interface reset */
139 	msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_CTLR_PRI_RST);
140 
141 	/* Mixer Load Lane 0 */
142 	msg_port_io_clrbits(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L0,
143 			    (1 << 6) | (1 << 7));
144 
145 	/* Mixer Load Lane 1 */
146 	msg_port_io_clrbits(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L1,
147 			    (1 << 6) | (1 << 7));
148 }
149 
150 static void quark_usb_early_init(void)
151 {
152 	/* The sequence below comes from Quark firmware writer guide */
153 
154 	msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_GLOBAL_PORT,
155 				1 << 1, (1 << 6) | (1 << 7));
156 
157 	msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_COMPBG,
158 				(1 << 8) | (1 << 9), (1 << 7) | (1 << 10));
159 
160 	msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 29);
161 
162 	msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL1, 1 << 1);
163 
164 	msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_PLL1,
165 				(1 << 3) | (1 << 4) | (1 << 5), 1 << 6);
166 
167 	msg_port_alt_clrbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 29);
168 
169 	msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 24);
170 }
171 
172 static void quark_thermal_early_init(void)
173 {
174 	/* The sequence below comes from Quark firmware writer guide */
175 
176 	/* thermal sensor mode config */
177 	msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG1,
178 				(1 << 3) | (1 << 4) | (1 << 5), 1 << 5);
179 	msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG1,
180 				(1 << 8) | (1 << 9) | (1 << 10) | (1 << 11) |
181 				(1 << 12), 1 << 9);
182 	msg_port_alt_setbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 14);
183 	msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 17);
184 	msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 18);
185 	msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG2, 0xffff, 0x011f);
186 	msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG3, 0xff, 0x17);
187 	msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG3,
188 				(1 << 8) | (1 << 9), 1 << 8);
189 	msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG3, 0xff000000);
190 	msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG4,
191 				0x7ff800, 0xc8 << 11);
192 
193 	/* thermal monitor catastrophic trip set point (105 celsius) */
194 	msg_port_clrsetbits(MSG_PORT_RMU, TS_TRIP, 0xff, 155);
195 
196 	/* thermal monitor catastrophic trip clear point (0 celsius) */
197 	msg_port_clrsetbits(MSG_PORT_RMU, TS_TRIP, 0xff0000, 50 << 16);
198 
199 	/* take thermal sensor out of reset */
200 	msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG4, 1 << 0);
201 
202 	/* enable thermal monitor */
203 	msg_port_setbits(MSG_PORT_RMU, TS_MODE, 1 << 15);
204 
205 	/* lock all thermal configuration */
206 	msg_port_setbits(MSG_PORT_RMU, RMU_CTRL, (1 << 5) | (1 << 6));
207 }
208 
209 static void quark_enable_legacy_seg(void)
210 {
211 	msg_port_setbits(MSG_PORT_HOST_BRIDGE, HMISC2,
212 			 HMISC2_SEGE | HMISC2_SEGF | HMISC2_SEGAB);
213 }
214 
215 int arch_cpu_init(void)
216 {
217 	int ret;
218 
219 	post_code(POST_CPU_INIT);
220 
221 	ret = x86_cpu_init_f();
222 	if (ret)
223 		return ret;
224 
225 	/*
226 	 * Quark SoC does not support MSR MTRRs. Fixed and variable range MTRRs
227 	 * are accessed indirectly via the message port and not the traditional
228 	 * MSR mechanism. Only UC, WT and WB cache types are supported.
229 	 */
230 	quark_setup_mtrr();
231 
232 	/*
233 	 * Quark SoC has some non-standard BARs (excluding PCI standard BARs)
234 	 * which need be initialized with suggested values
235 	 */
236 	quark_setup_bars();
237 
238 	/* Initialize USB2 PHY */
239 	quark_usb_early_init();
240 
241 	/* Initialize thermal sensor */
242 	quark_thermal_early_init();
243 
244 	/* Turn on legacy segments (A/B/E/F) decode to system RAM */
245 	quark_enable_legacy_seg();
246 
247 	return 0;
248 }
249 
250 int arch_cpu_init_dm(void)
251 {
252 	/*
253 	 * Initialize PCIe controller
254 	 *
255 	 * Quark SoC holds the PCIe controller in reset following a power on.
256 	 * U-Boot needs to release the PCIe controller from reset. The PCIe
257 	 * controller (D23:F0/F1) will not be visible in PCI configuration
258 	 * space and any access to its PCI configuration registers will cause
259 	 * system hang while it is held in reset.
260 	 */
261 	quark_pcie_early_init();
262 
263 	return 0;
264 }
265 
266 int print_cpuinfo(void)
267 {
268 	post_code(POST_CPU_INFO);
269 	return default_print_cpuinfo();
270 }
271 
272 void reset_cpu(ulong addr)
273 {
274 	/* cold reset */
275 	x86_full_reset();
276 }
277 
278 static void quark_pcie_init(void)
279 {
280 	u32 val;
281 
282 	/* PCIe upstream non-posted & posted request size */
283 	qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_CCFG,
284 				   CCFG_UPRS | CCFG_UNRS);
285 	qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_CCFG,
286 				   CCFG_UPRS | CCFG_UNRS);
287 
288 	/* PCIe packet fast transmit mode (IPF) */
289 	qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MPC2, MPC2_IPF);
290 	qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MPC2, MPC2_IPF);
291 
292 	/* PCIe message bus idle counter (SBIC) */
293 	qrk_pci_read_config_dword(QUARK_PCIE0, PCIE_RP_MBC, &val);
294 	val |= MBC_SBIC;
295 	qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MBC, val);
296 	qrk_pci_read_config_dword(QUARK_PCIE1, PCIE_RP_MBC, &val);
297 	val |= MBC_SBIC;
298 	qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MBC, val);
299 }
300 
301 static void quark_usb_init(void)
302 {
303 	u32 bar;
304 
305 	/* Change USB EHCI packet buffer OUT/IN threshold */
306 	qrk_pci_read_config_dword(QUARK_USB_EHCI, PCI_BASE_ADDRESS_0, &bar);
307 	writel((0x7f << 16) | 0x7f, bar + EHCI_INSNREG01);
308 
309 	/* Disable USB device interrupts */
310 	qrk_pci_read_config_dword(QUARK_USB_DEVICE, PCI_BASE_ADDRESS_0, &bar);
311 	writel(0x7f, bar + USBD_INT_MASK);
312 	writel((0xf << 16) | 0xf, bar + USBD_EP_INT_MASK);
313 	writel((0xf << 16) | 0xf, bar + USBD_EP_INT_STS);
314 }
315 
316 int arch_early_init_r(void)
317 {
318 	quark_pcie_init();
319 
320 	quark_usb_init();
321 
322 	return 0;
323 }
324 
325 int cpu_mmc_init(bd_t *bis)
326 {
327 	return pci_mmc_init("Quark SDHCI", mmc_supported);
328 }
329 
330 int arch_misc_init(void)
331 {
332 #ifdef CONFIG_ENABLE_MRC_CACHE
333 	/*
334 	 * We intend not to check any return value here, as even MRC cache
335 	 * is not saved successfully, it is not a severe error that will
336 	 * prevent system from continuing to boot.
337 	 */
338 	mrccache_save();
339 #endif
340 
341 	return 0;
342 }
343 
344 void board_final_cleanup(void)
345 {
346 	struct quark_rcba *rcba;
347 	u32 base, val;
348 
349 	qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, &base);
350 	base &= ~MEM_BAR_EN;
351 	rcba = (struct quark_rcba *)base;
352 
353 	/* Initialize 'Component ID' to zero */
354 	val = readl(&rcba->esd);
355 	val &= ~0xff0000;
356 	writel(val, &rcba->esd);
357 
358 	/* Lock HMBOUND for security */
359 	msg_port_setbits(MSG_PORT_HOST_BRIDGE, HM_BOUND, HM_BOUND_LOCK);
360 
361 	return;
362 }
363 
364 int reserve_arch(void)
365 {
366 #ifdef CONFIG_ENABLE_MRC_CACHE
367 	return mrccache_reserve();
368 #else
369 	return 0;
370 #endif
371 }
372