xref: /openbmc/u-boot/arch/x86/cpu/quark/quark.c (revision 1d2c0506)
1 /*
2  * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <mmc.h>
9 #include <asm/io.h>
10 #include <asm/ioapic.h>
11 #include <asm/mrccache.h>
12 #include <asm/mtrr.h>
13 #include <asm/pci.h>
14 #include <asm/post.h>
15 #include <asm/arch/device.h>
16 #include <asm/arch/msg_port.h>
17 #include <asm/arch/quark.h>
18 
19 static struct pci_device_id mmc_supported[] = {
20 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_SDIO },
21 	{},
22 };
23 
24 static void quark_setup_mtrr(void)
25 {
26 	u32 base, mask;
27 	int i;
28 
29 	disable_caches();
30 
31 	/* mark the VGA RAM area as uncacheable */
32 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_A0000,
33 		       MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE));
34 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_B0000,
35 		       MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE));
36 
37 	/* mark other fixed range areas as cacheable */
38 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_64K_00000,
39 		       MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
40 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_64K_40000,
41 		       MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
42 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_80000,
43 		       MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
44 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_90000,
45 		       MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
46 	for (i = MTRR_FIX_4K_C0000; i <= MTRR_FIX_4K_FC000; i++)
47 		msg_port_write(MSG_PORT_HOST_BRIDGE, i,
48 			       MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
49 
50 	/* variable range MTRR#0: ROM area */
51 	mask = ~(CONFIG_SYS_MONITOR_LEN - 1);
52 	base = CONFIG_SYS_TEXT_BASE & mask;
53 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYBASE(MTRR_VAR_ROM),
54 		       base | MTRR_TYPE_WRBACK);
55 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYMASK(MTRR_VAR_ROM),
56 		       mask | MTRR_PHYS_MASK_VALID);
57 
58 	/* variable range MTRR#1: eSRAM area */
59 	mask = ~(ESRAM_SIZE - 1);
60 	base = CONFIG_ESRAM_BASE & mask;
61 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYBASE(MTRR_VAR_ESRAM),
62 		       base | MTRR_TYPE_WRBACK);
63 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYMASK(MTRR_VAR_ESRAM),
64 		       mask | MTRR_PHYS_MASK_VALID);
65 
66 	/* enable both variable and fixed range MTRRs */
67 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_DEF_TYPE,
68 		       MTRR_DEF_TYPE_EN | MTRR_DEF_TYPE_FIX_EN);
69 
70 	enable_caches();
71 }
72 
73 static void quark_setup_bars(void)
74 {
75 	/* GPIO - D31:F0:R44h */
76 	qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GBA,
77 				   CONFIG_GPIO_BASE | IO_BAR_EN);
78 
79 	/* ACPI PM1 Block - D31:F0:R48h */
80 	qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_PM1BLK,
81 				   CONFIG_ACPI_PM1_BASE | IO_BAR_EN);
82 
83 	/* GPE0 - D31:F0:R4Ch */
84 	qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GPE0BLK,
85 				   CONFIG_ACPI_GPE0_BASE | IO_BAR_EN);
86 
87 	/* WDT - D31:F0:R84h */
88 	qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_WDTBA,
89 				   CONFIG_WDT_BASE | IO_BAR_EN);
90 
91 	/* RCBA - D31:F0:RF0h */
92 	qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA,
93 				   CONFIG_RCBA_BASE | MEM_BAR_EN);
94 
95 	/* ACPI P Block - Msg Port 04:R70h */
96 	msg_port_write(MSG_PORT_RMU, PBLK_BA,
97 		       CONFIG_ACPI_PBLK_BASE | IO_BAR_EN);
98 
99 	/* SPI DMA - Msg Port 04:R7Ah */
100 	msg_port_write(MSG_PORT_RMU, SPI_DMA_BA,
101 		       CONFIG_SPI_DMA_BASE | IO_BAR_EN);
102 
103 	/* PCIe ECAM */
104 	msg_port_write(MSG_PORT_MEM_ARBITER, AEC_CTRL,
105 		       CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN);
106 	msg_port_write(MSG_PORT_HOST_BRIDGE, HEC_REG,
107 		       CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN);
108 }
109 
110 static void quark_pcie_early_init(void)
111 {
112 	/*
113 	 * Step1: Assert PCIe signal PERST#
114 	 *
115 	 * The CPU interface to the PERST# signal is platform dependent.
116 	 * Call the board-specific codes to perform this task.
117 	 */
118 	board_assert_perst();
119 
120 	/* Step2: PHY common lane reset */
121 	msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_PHY_LANE_RST);
122 	/* wait 1 ms for PHY common lane reset */
123 	mdelay(1);
124 
125 	/* Step3: PHY sideband interface reset and controller main reset */
126 	msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG,
127 			     PCIE_PHY_SB_RST | PCIE_CTLR_MAIN_RST);
128 	/* wait 80ms for PLL to lock */
129 	mdelay(80);
130 
131 	/* Step4: Controller sideband interface reset */
132 	msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_CTLR_SB_RST);
133 	/* wait 20ms for controller sideband interface reset */
134 	mdelay(20);
135 
136 	/* Step5: De-assert PERST# */
137 	board_deassert_perst();
138 
139 	/* Step6: Controller primary interface reset */
140 	msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_CTLR_PRI_RST);
141 
142 	/* Mixer Load Lane 0 */
143 	msg_port_io_clrbits(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L0,
144 			    (1 << 6) | (1 << 7));
145 
146 	/* Mixer Load Lane 1 */
147 	msg_port_io_clrbits(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L1,
148 			    (1 << 6) | (1 << 7));
149 }
150 
151 static void quark_usb_early_init(void)
152 {
153 	/* The sequence below comes from Quark firmware writer guide */
154 
155 	msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_GLOBAL_PORT,
156 				1 << 1, (1 << 6) | (1 << 7));
157 
158 	msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_COMPBG,
159 				(1 << 8) | (1 << 9), (1 << 7) | (1 << 10));
160 
161 	msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 29);
162 
163 	msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL1, 1 << 1);
164 
165 	msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_PLL1,
166 				(1 << 3) | (1 << 4) | (1 << 5), 1 << 6);
167 
168 	msg_port_alt_clrbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 29);
169 
170 	msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 24);
171 }
172 
173 static void quark_thermal_early_init(void)
174 {
175 	/* The sequence below comes from Quark firmware writer guide */
176 
177 	/* thermal sensor mode config */
178 	msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG1,
179 				(1 << 3) | (1 << 4) | (1 << 5), 1 << 5);
180 	msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG1,
181 				(1 << 8) | (1 << 9) | (1 << 10) | (1 << 11) |
182 				(1 << 12), 1 << 9);
183 	msg_port_alt_setbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 14);
184 	msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 17);
185 	msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 18);
186 	msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG2, 0xffff, 0x011f);
187 	msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG3, 0xff, 0x17);
188 	msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG3,
189 				(1 << 8) | (1 << 9), 1 << 8);
190 	msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG3, 0xff000000);
191 	msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG4,
192 				0x7ff800, 0xc8 << 11);
193 
194 	/* thermal monitor catastrophic trip set point (105 celsius) */
195 	msg_port_clrsetbits(MSG_PORT_RMU, TS_TRIP, 0xff, 155);
196 
197 	/* thermal monitor catastrophic trip clear point (0 celsius) */
198 	msg_port_clrsetbits(MSG_PORT_RMU, TS_TRIP, 0xff0000, 50 << 16);
199 
200 	/* take thermal sensor out of reset */
201 	msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG4, 1 << 0);
202 
203 	/* enable thermal monitor */
204 	msg_port_setbits(MSG_PORT_RMU, TS_MODE, 1 << 15);
205 
206 	/* lock all thermal configuration */
207 	msg_port_setbits(MSG_PORT_RMU, RMU_CTRL, (1 << 5) | (1 << 6));
208 }
209 
210 static void quark_enable_legacy_seg(void)
211 {
212 	msg_port_setbits(MSG_PORT_HOST_BRIDGE, HMISC2,
213 			 HMISC2_SEGE | HMISC2_SEGF | HMISC2_SEGAB);
214 }
215 
216 int arch_cpu_init(void)
217 {
218 	int ret;
219 
220 	post_code(POST_CPU_INIT);
221 
222 	ret = x86_cpu_init_f();
223 	if (ret)
224 		return ret;
225 
226 	/*
227 	 * Quark SoC does not support MSR MTRRs. Fixed and variable range MTRRs
228 	 * are accessed indirectly via the message port and not the traditional
229 	 * MSR mechanism. Only UC, WT and WB cache types are supported.
230 	 */
231 	quark_setup_mtrr();
232 
233 	/*
234 	 * Quark SoC has some non-standard BARs (excluding PCI standard BARs)
235 	 * which need be initialized with suggested values
236 	 */
237 	quark_setup_bars();
238 
239 	/* Initialize USB2 PHY */
240 	quark_usb_early_init();
241 
242 	/* Initialize thermal sensor */
243 	quark_thermal_early_init();
244 
245 	/* Turn on legacy segments (A/B/E/F) decode to system RAM */
246 	quark_enable_legacy_seg();
247 
248 	return 0;
249 }
250 
251 int arch_cpu_init_dm(void)
252 {
253 	/*
254 	 * Initialize PCIe controller
255 	 *
256 	 * Quark SoC holds the PCIe controller in reset following a power on.
257 	 * U-Boot needs to release the PCIe controller from reset. The PCIe
258 	 * controller (D23:F0/F1) will not be visible in PCI configuration
259 	 * space and any access to its PCI configuration registers will cause
260 	 * system hang while it is held in reset.
261 	 */
262 	quark_pcie_early_init();
263 
264 	return 0;
265 }
266 
267 int print_cpuinfo(void)
268 {
269 	post_code(POST_CPU_INFO);
270 	return default_print_cpuinfo();
271 }
272 
273 void reset_cpu(ulong addr)
274 {
275 	/* cold reset */
276 	x86_full_reset();
277 }
278 
279 static void quark_pcie_init(void)
280 {
281 	u32 val;
282 
283 	/* PCIe upstream non-posted & posted request size */
284 	qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_CCFG,
285 				   CCFG_UPRS | CCFG_UNRS);
286 	qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_CCFG,
287 				   CCFG_UPRS | CCFG_UNRS);
288 
289 	/* PCIe packet fast transmit mode (IPF) */
290 	qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MPC2, MPC2_IPF);
291 	qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MPC2, MPC2_IPF);
292 
293 	/* PCIe message bus idle counter (SBIC) */
294 	qrk_pci_read_config_dword(QUARK_PCIE0, PCIE_RP_MBC, &val);
295 	val |= MBC_SBIC;
296 	qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MBC, val);
297 	qrk_pci_read_config_dword(QUARK_PCIE1, PCIE_RP_MBC, &val);
298 	val |= MBC_SBIC;
299 	qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MBC, val);
300 }
301 
302 static void quark_usb_init(void)
303 {
304 	u32 bar;
305 
306 	/* Change USB EHCI packet buffer OUT/IN threshold */
307 	qrk_pci_read_config_dword(QUARK_USB_EHCI, PCI_BASE_ADDRESS_0, &bar);
308 	writel((0x7f << 16) | 0x7f, bar + EHCI_INSNREG01);
309 
310 	/* Disable USB device interrupts */
311 	qrk_pci_read_config_dword(QUARK_USB_DEVICE, PCI_BASE_ADDRESS_0, &bar);
312 	writel(0x7f, bar + USBD_INT_MASK);
313 	writel((0xf << 16) | 0xf, bar + USBD_EP_INT_MASK);
314 	writel((0xf << 16) | 0xf, bar + USBD_EP_INT_STS);
315 }
316 
317 int arch_early_init_r(void)
318 {
319 	quark_pcie_init();
320 
321 	quark_usb_init();
322 
323 	return 0;
324 }
325 
326 int cpu_mmc_init(bd_t *bis)
327 {
328 	return pci_mmc_init("Quark SDHCI", mmc_supported);
329 }
330 
331 int arch_misc_init(void)
332 {
333 #ifdef CONFIG_ENABLE_MRC_CACHE
334 	/*
335 	 * We intend not to check any return value here, as even MRC cache
336 	 * is not saved successfully, it is not a severe error that will
337 	 * prevent system from continuing to boot.
338 	 */
339 	mrccache_save();
340 #endif
341 
342 	/* Assign a unique I/O APIC ID */
343 	io_apic_set_id(1);
344 
345 	return 0;
346 }
347 
348 void board_final_cleanup(void)
349 {
350 	struct quark_rcba *rcba;
351 	u32 base, val;
352 
353 	qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, &base);
354 	base &= ~MEM_BAR_EN;
355 	rcba = (struct quark_rcba *)base;
356 
357 	/* Initialize 'Component ID' to zero */
358 	val = readl(&rcba->esd);
359 	val &= ~0xff0000;
360 	writel(val, &rcba->esd);
361 
362 	/* Lock HMBOUND for security */
363 	msg_port_setbits(MSG_PORT_HOST_BRIDGE, HM_BOUND, HM_BOUND_LOCK);
364 
365 	return;
366 }
367