1 /* 2 * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <pci.h> 9 #include <qfw.h> 10 #include <asm/irq.h> 11 #include <asm/post.h> 12 #include <asm/processor.h> 13 #include <asm/arch/device.h> 14 #include <asm/arch/qemu.h> 15 16 static bool i440fx; 17 18 #ifdef CONFIG_QFW 19 20 /* on x86, the qfw registers are all IO ports */ 21 #define FW_CONTROL_PORT 0x510 22 #define FW_DATA_PORT 0x511 23 #define FW_DMA_PORT_LOW 0x514 24 #define FW_DMA_PORT_HIGH 0x518 25 26 static void qemu_x86_fwcfg_read_entry_pio(uint16_t entry, 27 uint32_t size, void *address) 28 { 29 uint32_t i = 0; 30 uint8_t *data = address; 31 32 /* 33 * writting FW_CFG_INVALID will cause read operation to resume at 34 * last offset, otherwise read will start at offset 0 35 * 36 * Note: on platform where the control register is IO port, the 37 * endianness is little endian. 38 */ 39 if (entry != FW_CFG_INVALID) 40 outw(cpu_to_le16(entry), FW_CONTROL_PORT); 41 42 /* the endianness of data register is string-preserving */ 43 while (size--) 44 data[i++] = inb(FW_DATA_PORT); 45 } 46 47 static void qemu_x86_fwcfg_read_entry_dma(struct fw_cfg_dma_access *dma) 48 { 49 /* the DMA address register is big endian */ 50 outl(cpu_to_be32((uintptr_t)dma), FW_DMA_PORT_HIGH); 51 52 while (be32_to_cpu(dma->control) & ~FW_CFG_DMA_ERROR) 53 __asm__ __volatile__ ("pause"); 54 } 55 56 static struct fw_cfg_arch_ops fwcfg_x86_ops = { 57 .arch_read_pio = qemu_x86_fwcfg_read_entry_pio, 58 .arch_read_dma = qemu_x86_fwcfg_read_entry_dma 59 }; 60 #endif 61 62 static void enable_pm_piix(void) 63 { 64 u8 en; 65 u16 cmd; 66 67 /* Set the PM I/O base */ 68 pci_write_config32(PIIX_PM, PMBA, CONFIG_ACPI_PM1_BASE | 1); 69 70 /* Enable access to the PM I/O space */ 71 pci_read_config16(PIIX_PM, PCI_COMMAND, &cmd); 72 cmd |= PCI_COMMAND_IO; 73 pci_write_config16(PIIX_PM, PCI_COMMAND, cmd); 74 75 /* PM I/O Space Enable (PMIOSE) */ 76 pci_read_config8(PIIX_PM, PMREGMISC, &en); 77 en |= PMIOSE; 78 pci_write_config8(PIIX_PM, PMREGMISC, en); 79 } 80 81 static void enable_pm_ich9(void) 82 { 83 /* Set the PM I/O base */ 84 pci_write_config32(ICH9_PM, PMBA, CONFIG_ACPI_PM1_BASE | 1); 85 } 86 87 static void qemu_chipset_init(void) 88 { 89 u16 device, xbcs; 90 int pam, i; 91 92 /* 93 * i440FX and Q35 chipset have different PAM register offset, but with 94 * the same bitfield layout. Here we determine the offset based on its 95 * PCI device ID. 96 */ 97 pci_read_config16(PCI_BDF(0, 0, 0), PCI_DEVICE_ID, &device); 98 i440fx = (device == PCI_DEVICE_ID_INTEL_82441); 99 pam = i440fx ? I440FX_PAM : Q35_PAM; 100 101 /* 102 * Initialize Programmable Attribute Map (PAM) Registers 103 * 104 * Configure legacy segments C/D/E/F to system RAM 105 */ 106 for (i = 0; i < PAM_NUM; i++) 107 pci_write_config8(PCI_BDF(0, 0, 0), pam + i, PAM_RW); 108 109 if (i440fx) { 110 /* 111 * Enable legacy IDE I/O ports decode 112 * 113 * Note: QEMU always decode legacy IDE I/O port on PIIX chipset. 114 * However Linux ata_piix driver does sanity check on these two 115 * registers to see whether legacy ports decode is turned on. 116 * This is to make Linux ata_piix driver happy. 117 */ 118 pci_write_config16(PIIX_IDE, IDE0_TIM, IDE_DECODE_EN); 119 pci_write_config16(PIIX_IDE, IDE1_TIM, IDE_DECODE_EN); 120 121 /* Enable I/O APIC */ 122 pci_read_config16(PIIX_ISA, XBCS, &xbcs); 123 xbcs |= APIC_EN; 124 pci_write_config16(PIIX_ISA, XBCS, xbcs); 125 126 enable_pm_piix(); 127 } else { 128 /* Configure PCIe ECAM base address */ 129 pci_write_config32(PCI_BDF(0, 0, 0), PCIEX_BAR, 130 CONFIG_PCIE_ECAM_BASE | BAR_EN); 131 132 enable_pm_ich9(); 133 } 134 135 #ifdef CONFIG_QFW 136 qemu_fwcfg_init(&fwcfg_x86_ops); 137 #endif 138 } 139 140 #if !CONFIG_IS_ENABLED(SPL_X86_32BIT_INIT) 141 int arch_cpu_init(void) 142 { 143 post_code(POST_CPU_INIT); 144 145 return x86_cpu_init_f(); 146 } 147 #endif 148 149 #if !CONFIG_IS_ENABLED(EFI_STUB) && \ 150 !CONFIG_IS_ENABLED(SPL_X86_32BIT_INIT) 151 int print_cpuinfo(void) 152 { 153 post_code(POST_CPU_INFO); 154 return default_print_cpuinfo(); 155 } 156 #endif 157 158 void reset_cpu(ulong addr) 159 { 160 /* cold reset */ 161 x86_full_reset(); 162 } 163 164 int arch_early_init_r(void) 165 { 166 qemu_chipset_init(); 167 168 return 0; 169 } 170 171 #ifdef CONFIG_GENERATE_MP_TABLE 172 int mp_determine_pci_dstirq(int bus, int dev, int func, int pirq) 173 { 174 u8 irq; 175 176 if (i440fx) { 177 /* 178 * Not like most x86 platforms, the PIRQ[A-D] on PIIX3 are not 179 * connected to I/O APIC INTPIN#16-19. Instead they are routed 180 * to an irq number controled by the PIRQ routing register. 181 */ 182 pci_read_config8(PCI_BDF(bus, dev, func), 183 PCI_INTERRUPT_LINE, &irq); 184 } else { 185 /* 186 * ICH9's PIRQ[A-H] are not consecutive numbers from 0 to 7. 187 * PIRQ[A-D] still maps to [0-3] but PIRQ[E-H] maps to [8-11]. 188 */ 189 irq = pirq < 8 ? pirq + 16 : pirq + 12; 190 } 191 192 return irq; 193 } 194 #endif 195