1 /* 2 * Copyright (c) 2011 The Chromium OS Authors. 3 * (C) Copyright 2010,2011 4 * Graeme Russ, <graeme.russ@gmail.com> 5 * 6 * Portions from Coreboot mainboard/google/link/romstage.c 7 * Copyright (C) 2007-2010 coresystems GmbH 8 * Copyright (C) 2011 Google Inc. 9 * 10 * SPDX-License-Identifier: GPL-2.0 11 */ 12 13 #include <common.h> 14 #include <errno.h> 15 #include <fdtdec.h> 16 #include <malloc.h> 17 #include <net.h> 18 #include <rtc.h> 19 #include <spi.h> 20 #include <spi_flash.h> 21 #include <asm/processor.h> 22 #include <asm/gpio.h> 23 #include <asm/global_data.h> 24 #include <asm/mtrr.h> 25 #include <asm/pci.h> 26 #include <asm/arch/me.h> 27 #include <asm/arch/mrccache.h> 28 #include <asm/arch/pei_data.h> 29 #include <asm/arch/pch.h> 30 #include <asm/post.h> 31 #include <asm/arch/sandybridge.h> 32 33 DECLARE_GLOBAL_DATA_PTR; 34 35 #define CMOS_OFFSET_MRC_SEED 152 36 #define CMOS_OFFSET_MRC_SEED_S3 156 37 #define CMOS_OFFSET_MRC_SEED_CHK 160 38 39 /* 40 * This function looks for the highest region of memory lower than 4GB which 41 * has enough space for U-Boot where U-Boot is aligned on a page boundary. 42 * It overrides the default implementation found elsewhere which simply 43 * picks the end of ram, wherever that may be. The location of the stack, 44 * the relocation address, and how far U-Boot is moved by relocation are 45 * set in the global data structure. 46 */ 47 ulong board_get_usable_ram_top(ulong total_size) 48 { 49 struct memory_info *info = &gd->arch.meminfo; 50 uintptr_t dest_addr = 0; 51 struct memory_area *largest = NULL; 52 int i; 53 54 /* Find largest area of memory below 4GB */ 55 56 for (i = 0; i < info->num_areas; i++) { 57 struct memory_area *area = &info->area[i]; 58 59 if (area->start >= 1ULL << 32) 60 continue; 61 if (!largest || area->size > largest->size) 62 largest = area; 63 } 64 65 /* If no suitable area was found, return an error. */ 66 assert(largest); 67 if (!largest || largest->size < (2 << 20)) 68 panic("No available memory found for relocation"); 69 70 dest_addr = largest->start + largest->size; 71 72 return (ulong)dest_addr; 73 } 74 75 void dram_init_banksize(void) 76 { 77 struct memory_info *info = &gd->arch.meminfo; 78 int num_banks; 79 int i; 80 81 for (i = 0, num_banks = 0; i < info->num_areas; i++) { 82 struct memory_area *area = &info->area[i]; 83 84 if (area->start >= 1ULL << 32) 85 continue; 86 gd->bd->bi_dram[num_banks].start = area->start; 87 gd->bd->bi_dram[num_banks].size = area->size; 88 num_banks++; 89 } 90 } 91 92 static int get_mrc_entry(struct udevice **devp, struct fmap_entry *entry) 93 { 94 const void *blob = gd->fdt_blob; 95 int node, spi_node, mrc_node; 96 int upto; 97 int ret; 98 99 /* Find the flash chip within the SPI controller node */ 100 upto = 0; 101 spi_node = fdtdec_next_alias(blob, "spi", COMPAT_INTEL_ICH_SPI, &upto); 102 if (spi_node < 0) 103 return -ENOENT; 104 node = fdt_first_subnode(blob, spi_node); 105 if (node < 0) 106 return -ECHILD; 107 108 /* Find the place where we put the MRC cache */ 109 mrc_node = fdt_subnode_offset(blob, node, "rw-mrc-cache"); 110 if (mrc_node < 0) 111 return -EPERM; 112 113 if (fdtdec_read_fmap_entry(blob, mrc_node, "rm-mrc-cache", entry)) 114 return -EINVAL; 115 116 if (devp) { 117 debug("getting sf\n"); 118 ret = uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node, 119 devp); 120 debug("ret = %d\n", ret); 121 if (ret) 122 return ret; 123 } 124 125 return 0; 126 } 127 128 static int read_seed_from_cmos(struct pei_data *pei_data) 129 { 130 u16 c1, c2, checksum, seed_checksum; 131 132 /* 133 * Read scrambler seeds from CMOS RAM. We don't want to store them in 134 * SPI flash since they change on every boot and that would wear down 135 * the flash too much. So we store these in CMOS and the large MRC 136 * data in SPI flash. 137 */ 138 pei_data->scrambler_seed = rtc_read32(CMOS_OFFSET_MRC_SEED); 139 debug("Read scrambler seed 0x%08x from CMOS 0x%02x\n", 140 pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED); 141 142 pei_data->scrambler_seed_s3 = rtc_read32(CMOS_OFFSET_MRC_SEED_S3); 143 debug("Read S3 scrambler seed 0x%08x from CMOS 0x%02x\n", 144 pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3); 145 146 /* Compute seed checksum and compare */ 147 c1 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed, 148 sizeof(u32)); 149 c2 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed_s3, 150 sizeof(u32)); 151 checksum = add_ip_checksums(sizeof(u32), c1, c2); 152 153 seed_checksum = rtc_read8(CMOS_OFFSET_MRC_SEED_CHK); 154 seed_checksum |= rtc_read8(CMOS_OFFSET_MRC_SEED_CHK + 1) << 8; 155 156 if (checksum != seed_checksum) { 157 debug("%s: invalid seed checksum\n", __func__); 158 pei_data->scrambler_seed = 0; 159 pei_data->scrambler_seed_s3 = 0; 160 return -EINVAL; 161 } 162 163 return 0; 164 } 165 166 static int prepare_mrc_cache(struct pei_data *pei_data) 167 { 168 struct mrc_data_container *mrc_cache; 169 struct fmap_entry entry; 170 int ret; 171 172 ret = read_seed_from_cmos(pei_data); 173 if (ret) 174 return ret; 175 ret = get_mrc_entry(NULL, &entry); 176 if (ret) 177 return ret; 178 mrc_cache = mrccache_find_current(&entry); 179 if (!mrc_cache) 180 return -ENOENT; 181 182 /* 183 * TODO(sjg@chromium.org): Skip this for now as it causes boot 184 * problems 185 */ 186 if (0) { 187 pei_data->mrc_input = mrc_cache->data; 188 pei_data->mrc_input_len = mrc_cache->data_size; 189 } 190 debug("%s: at %p, size %x checksum %04x\n", __func__, 191 pei_data->mrc_input, pei_data->mrc_input_len, 192 mrc_cache->checksum); 193 194 return 0; 195 } 196 197 static int build_mrc_data(struct mrc_data_container **datap) 198 { 199 struct mrc_data_container *data; 200 int orig_len; 201 int output_len; 202 203 orig_len = gd->arch.mrc_output_len; 204 output_len = ALIGN(orig_len, 16); 205 data = malloc(output_len + sizeof(*data)); 206 if (!data) 207 return -ENOMEM; 208 data->signature = MRC_DATA_SIGNATURE; 209 data->data_size = output_len; 210 data->reserved = 0; 211 memcpy(data->data, gd->arch.mrc_output, orig_len); 212 213 /* Zero the unused space in aligned buffer. */ 214 if (output_len > orig_len) 215 memset(data->data + orig_len, 0, output_len - orig_len); 216 217 data->checksum = compute_ip_checksum(data->data, output_len); 218 *datap = data; 219 220 return 0; 221 } 222 223 static int write_seeds_to_cmos(struct pei_data *pei_data) 224 { 225 u16 c1, c2, checksum; 226 227 /* Save the MRC seed values to CMOS */ 228 rtc_write32(CMOS_OFFSET_MRC_SEED, pei_data->scrambler_seed); 229 debug("Save scrambler seed 0x%08x to CMOS 0x%02x\n", 230 pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED); 231 232 rtc_write32(CMOS_OFFSET_MRC_SEED_S3, pei_data->scrambler_seed_s3); 233 debug("Save s3 scrambler seed 0x%08x to CMOS 0x%02x\n", 234 pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3); 235 236 /* Save a simple checksum of the seed values */ 237 c1 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed, 238 sizeof(u32)); 239 c2 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed_s3, 240 sizeof(u32)); 241 checksum = add_ip_checksums(sizeof(u32), c1, c2); 242 243 rtc_write8(CMOS_OFFSET_MRC_SEED_CHK, checksum & 0xff); 244 rtc_write8(CMOS_OFFSET_MRC_SEED_CHK + 1, (checksum >> 8) & 0xff); 245 246 return 0; 247 } 248 249 static int sdram_save_mrc_data(void) 250 { 251 struct mrc_data_container *data; 252 struct fmap_entry entry; 253 struct udevice *sf; 254 int ret; 255 256 if (!gd->arch.mrc_output_len) 257 return 0; 258 debug("Saving %d bytes of MRC output data to SPI flash\n", 259 gd->arch.mrc_output_len); 260 261 ret = get_mrc_entry(&sf, &entry); 262 if (ret) 263 goto err_entry; 264 ret = build_mrc_data(&data); 265 if (ret) 266 goto err_data; 267 ret = mrccache_update(sf, &entry, data); 268 if (!ret) 269 debug("Saved MRC data with checksum %04x\n", data->checksum); 270 271 free(data); 272 err_data: 273 err_entry: 274 if (ret) 275 debug("%s: Failed: %d\n", __func__, ret); 276 return ret; 277 } 278 279 /* Use this hook to save our SDRAM parameters */ 280 int misc_init_r(void) 281 { 282 int ret; 283 284 ret = sdram_save_mrc_data(); 285 if (ret) 286 printf("Unable to save MRC data: %d\n", ret); 287 288 return 0; 289 } 290 291 static const char *const ecc_decoder[] = { 292 "inactive", 293 "active on IO", 294 "disabled on IO", 295 "active" 296 }; 297 298 /* 299 * Dump in the log memory controller configuration as read from the memory 300 * controller registers. 301 */ 302 static void report_memory_config(void) 303 { 304 u32 addr_decoder_common, addr_decode_ch[2]; 305 int i; 306 307 addr_decoder_common = readl(MCHBAR_REG(0x5000)); 308 addr_decode_ch[0] = readl(MCHBAR_REG(0x5004)); 309 addr_decode_ch[1] = readl(MCHBAR_REG(0x5008)); 310 311 debug("memcfg DDR3 clock %d MHz\n", 312 (readl(MCHBAR_REG(0x5e04)) * 13333 * 2 + 50) / 100); 313 debug("memcfg channel assignment: A: %d, B % d, C % d\n", 314 addr_decoder_common & 3, 315 (addr_decoder_common >> 2) & 3, 316 (addr_decoder_common >> 4) & 3); 317 318 for (i = 0; i < ARRAY_SIZE(addr_decode_ch); i++) { 319 u32 ch_conf = addr_decode_ch[i]; 320 debug("memcfg channel[%d] config (%8.8x):\n", i, ch_conf); 321 debug(" ECC %s\n", ecc_decoder[(ch_conf >> 24) & 3]); 322 debug(" enhanced interleave mode %s\n", 323 ((ch_conf >> 22) & 1) ? "on" : "off"); 324 debug(" rank interleave %s\n", 325 ((ch_conf >> 21) & 1) ? "on" : "off"); 326 debug(" DIMMA %d MB width x%d %s rank%s\n", 327 ((ch_conf >> 0) & 0xff) * 256, 328 ((ch_conf >> 19) & 1) ? 16 : 8, 329 ((ch_conf >> 17) & 1) ? "dual" : "single", 330 ((ch_conf >> 16) & 1) ? "" : ", selected"); 331 debug(" DIMMB %d MB width x%d %s rank%s\n", 332 ((ch_conf >> 8) & 0xff) * 256, 333 ((ch_conf >> 20) & 1) ? 16 : 8, 334 ((ch_conf >> 18) & 1) ? "dual" : "single", 335 ((ch_conf >> 16) & 1) ? ", selected" : ""); 336 } 337 } 338 339 static void post_system_agent_init(struct pei_data *pei_data) 340 { 341 /* If PCIe init is skipped, set the PEG clock gating */ 342 if (!pei_data->pcie_init) 343 setbits_le32(MCHBAR_REG(0x7010), 1); 344 } 345 346 static asmlinkage void console_tx_byte(unsigned char byte) 347 { 348 #ifdef DEBUG 349 putc(byte); 350 #endif 351 } 352 353 static int recovery_mode_enabled(void) 354 { 355 return false; 356 } 357 358 /** 359 * Find the PEI executable in the ROM and execute it. 360 * 361 * @param pei_data: configuration data for UEFI PEI reference code 362 */ 363 int sdram_initialise(struct pei_data *pei_data) 364 { 365 unsigned version; 366 const char *data; 367 uint16_t done; 368 int ret; 369 370 report_platform_info(); 371 372 /* Wait for ME to be ready */ 373 ret = intel_early_me_init(); 374 if (ret) 375 return ret; 376 ret = intel_early_me_uma_size(); 377 if (ret < 0) 378 return ret; 379 380 debug("Starting UEFI PEI System Agent\n"); 381 382 /* 383 * Do not pass MRC data in for recovery mode boot, 384 * Always pass it in for S3 resume. 385 */ 386 if (!recovery_mode_enabled() || 387 pei_data->boot_mode == PEI_BOOT_RESUME) { 388 ret = prepare_mrc_cache(pei_data); 389 if (ret) 390 debug("prepare_mrc_cache failed: %d\n", ret); 391 } 392 393 /* If MRC data is not found we cannot continue S3 resume. */ 394 if (pei_data->boot_mode == PEI_BOOT_RESUME && !pei_data->mrc_input) { 395 debug("Giving up in sdram_initialize: No MRC data\n"); 396 outb(0x6, PORT_RESET); 397 cpu_hlt(); 398 } 399 400 /* Pass console handler in pei_data */ 401 pei_data->tx_byte = console_tx_byte; 402 403 debug("PEI data at %p, size %x:\n", pei_data, sizeof(*pei_data)); 404 405 data = (char *)CONFIG_X86_MRC_ADDR; 406 if (data) { 407 int rv; 408 int (*func)(struct pei_data *); 409 410 debug("Calling MRC at %p\n", data); 411 post_code(POST_PRE_MRC); 412 func = (int (*)(struct pei_data *))data; 413 rv = func(pei_data); 414 post_code(POST_MRC); 415 if (rv) { 416 switch (rv) { 417 case -1: 418 printf("PEI version mismatch.\n"); 419 break; 420 case -2: 421 printf("Invalid memory frequency.\n"); 422 break; 423 default: 424 printf("MRC returned %x.\n", rv); 425 } 426 printf("Nonzero MRC return value.\n"); 427 return -EFAULT; 428 } 429 } else { 430 printf("UEFI PEI System Agent not found.\n"); 431 return -ENOSYS; 432 } 433 434 #if CONFIG_USBDEBUG 435 /* mrc.bin reconfigures USB, so reinit it to have debug */ 436 early_usbdebug_init(); 437 #endif 438 439 version = readl(MCHBAR_REG(0x5034)); 440 debug("System Agent Version %d.%d.%d Build %d\n", 441 version >> 24 , (version >> 16) & 0xff, 442 (version >> 8) & 0xff, version & 0xff); 443 debug("MCR output data length %#x at %p\n", pei_data->mrc_output_len, 444 pei_data->mrc_output); 445 446 /* 447 * Send ME init done for SandyBridge here. This is done inside the 448 * SystemAgent binary on IvyBridge 449 */ 450 done = x86_pci_read_config32(PCH_DEV, PCI_DEVICE_ID); 451 done &= BASE_REV_MASK; 452 if (BASE_REV_SNB == done) 453 intel_early_me_init_done(ME_INIT_STATUS_SUCCESS); 454 else 455 intel_early_me_status(); 456 457 post_system_agent_init(pei_data); 458 report_memory_config(); 459 460 /* S3 resume: don't save scrambler seed or MRC data */ 461 if (pei_data->boot_mode != PEI_BOOT_RESUME) { 462 /* 463 * This will be copied to SDRAM in reserve_arch(), then written 464 * to SPI flash in sdram_save_mrc_data() 465 */ 466 gd->arch.mrc_output = (char *)pei_data->mrc_output; 467 gd->arch.mrc_output_len = pei_data->mrc_output_len; 468 ret = write_seeds_to_cmos(pei_data); 469 if (ret) 470 debug("Failed to write seeds to CMOS: %d\n", ret); 471 } 472 473 return 0; 474 } 475 476 int reserve_arch(void) 477 { 478 u16 checksum; 479 480 checksum = compute_ip_checksum(gd->arch.mrc_output, 481 gd->arch.mrc_output_len); 482 debug("Saving %d bytes for MRC output data, checksum %04x\n", 483 gd->arch.mrc_output_len, checksum); 484 gd->start_addr_sp -= gd->arch.mrc_output_len; 485 memcpy((void *)gd->start_addr_sp, gd->arch.mrc_output, 486 gd->arch.mrc_output_len); 487 gd->arch.mrc_output = (char *)gd->start_addr_sp; 488 gd->start_addr_sp &= ~0xf; 489 490 return 0; 491 } 492 493 static int copy_spd(struct pei_data *peid) 494 { 495 const int gpio_vector[] = {41, 42, 43, 10, -1}; 496 int spd_index; 497 const void *blob = gd->fdt_blob; 498 int node, spd_node; 499 int ret, i; 500 501 for (i = 0; ; i++) { 502 if (gpio_vector[i] == -1) 503 break; 504 ret = gpio_requestf(gpio_vector[i], "spd_id%d", i); 505 if (ret) { 506 debug("%s: Could not request gpio %d\n", __func__, 507 gpio_vector[i]); 508 return ret; 509 } 510 } 511 spd_index = gpio_get_values_as_int(gpio_vector); 512 debug("spd index %d\n", spd_index); 513 node = fdtdec_next_compatible(blob, 0, COMPAT_MEMORY_SPD); 514 if (node < 0) { 515 printf("SPD data not found.\n"); 516 return -ENOENT; 517 } 518 519 for (spd_node = fdt_first_subnode(blob, node); 520 spd_node > 0; 521 spd_node = fdt_next_subnode(blob, spd_node)) { 522 const char *data; 523 int len; 524 525 if (fdtdec_get_int(blob, spd_node, "reg", -1) != spd_index) 526 continue; 527 data = fdt_getprop(blob, spd_node, "data", &len); 528 if (len < sizeof(peid->spd_data[0])) { 529 printf("Missing SPD data\n"); 530 return -EINVAL; 531 } 532 533 debug("Using SDRAM SPD data for '%s'\n", 534 fdt_get_name(blob, spd_node, NULL)); 535 memcpy(peid->spd_data[0], data, sizeof(peid->spd_data[0])); 536 break; 537 } 538 539 if (spd_node < 0) { 540 printf("No SPD data found for index %d\n", spd_index); 541 return -ENOENT; 542 } 543 544 return 0; 545 } 546 547 /** 548 * add_memory_area() - Add a new usable memory area to our list 549 * 550 * Note: @start and @end must not span the first 4GB boundary 551 * 552 * @info: Place to store memory info 553 * @start: Start of this memory area 554 * @end: End of this memory area + 1 555 */ 556 static int add_memory_area(struct memory_info *info, 557 uint64_t start, uint64_t end) 558 { 559 struct memory_area *ptr; 560 561 if (info->num_areas == CONFIG_NR_DRAM_BANKS) 562 return -ENOSPC; 563 564 ptr = &info->area[info->num_areas]; 565 ptr->start = start; 566 ptr->size = end - start; 567 info->total_memory += ptr->size; 568 if (ptr->start < (1ULL << 32)) 569 info->total_32bit_memory += ptr->size; 570 debug("%d: memory %llx size %llx, total now %llx / %llx\n", 571 info->num_areas, ptr->start, ptr->size, 572 info->total_32bit_memory, info->total_memory); 573 info->num_areas++; 574 575 return 0; 576 } 577 578 /** 579 * sdram_find() - Find available memory 580 * 581 * This is a bit complicated since on x86 there are system memory holes all 582 * over the place. We create a list of available memory blocks 583 */ 584 static int sdram_find(pci_dev_t dev) 585 { 586 struct memory_info *info = &gd->arch.meminfo; 587 uint32_t tseg_base, uma_size, tolud; 588 uint64_t tom, me_base, touud; 589 uint64_t uma_memory_base = 0; 590 uint64_t uma_memory_size; 591 unsigned long long tomk; 592 uint16_t ggc; 593 594 /* Total Memory 2GB example: 595 * 596 * 00000000 0000MB-1992MB 1992MB RAM (writeback) 597 * 7c800000 1992MB-2000MB 8MB TSEG (SMRR) 598 * 7d000000 2000MB-2002MB 2MB GFX GTT (uncached) 599 * 7d200000 2002MB-2034MB 32MB GFX UMA (uncached) 600 * 7f200000 2034MB TOLUD 601 * 7f800000 2040MB MEBASE 602 * 7f800000 2040MB-2048MB 8MB ME UMA (uncached) 603 * 80000000 2048MB TOM 604 * 100000000 4096MB-4102MB 6MB RAM (writeback) 605 * 606 * Total Memory 4GB example: 607 * 608 * 00000000 0000MB-2768MB 2768MB RAM (writeback) 609 * ad000000 2768MB-2776MB 8MB TSEG (SMRR) 610 * ad800000 2776MB-2778MB 2MB GFX GTT (uncached) 611 * ada00000 2778MB-2810MB 32MB GFX UMA (uncached) 612 * afa00000 2810MB TOLUD 613 * ff800000 4088MB MEBASE 614 * ff800000 4088MB-4096MB 8MB ME UMA (uncached) 615 * 100000000 4096MB TOM 616 * 100000000 4096MB-5374MB 1278MB RAM (writeback) 617 * 14fe00000 5368MB TOUUD 618 */ 619 620 /* Top of Upper Usable DRAM, including remap */ 621 touud = x86_pci_read_config32(dev, TOUUD+4); 622 touud <<= 32; 623 touud |= x86_pci_read_config32(dev, TOUUD); 624 625 /* Top of Lower Usable DRAM */ 626 tolud = x86_pci_read_config32(dev, TOLUD); 627 628 /* Top of Memory - does not account for any UMA */ 629 tom = x86_pci_read_config32(dev, 0xa4); 630 tom <<= 32; 631 tom |= x86_pci_read_config32(dev, 0xa0); 632 633 debug("TOUUD %llx TOLUD %08x TOM %llx\n", touud, tolud, tom); 634 635 /* ME UMA needs excluding if total memory <4GB */ 636 me_base = x86_pci_read_config32(dev, 0x74); 637 me_base <<= 32; 638 me_base |= x86_pci_read_config32(dev, 0x70); 639 640 debug("MEBASE %llx\n", me_base); 641 642 /* TODO: Get rid of all this shifting by 10 bits */ 643 tomk = tolud >> 10; 644 if (me_base == tolud) { 645 /* ME is from MEBASE-TOM */ 646 uma_size = (tom - me_base) >> 10; 647 /* Increment TOLUD to account for ME as RAM */ 648 tolud += uma_size << 10; 649 /* UMA starts at old TOLUD */ 650 uma_memory_base = tomk * 1024ULL; 651 uma_memory_size = uma_size * 1024ULL; 652 debug("ME UMA base %llx size %uM\n", me_base, uma_size >> 10); 653 } 654 655 /* Graphics memory comes next */ 656 ggc = x86_pci_read_config16(dev, GGC); 657 if (!(ggc & 2)) { 658 debug("IGD decoded, subtracting "); 659 660 /* Graphics memory */ 661 uma_size = ((ggc >> 3) & 0x1f) * 32 * 1024ULL; 662 debug("%uM UMA", uma_size >> 10); 663 tomk -= uma_size; 664 uma_memory_base = tomk * 1024ULL; 665 uma_memory_size += uma_size * 1024ULL; 666 667 /* GTT Graphics Stolen Memory Size (GGMS) */ 668 uma_size = ((ggc >> 8) & 0x3) * 1024ULL; 669 tomk -= uma_size; 670 uma_memory_base = tomk * 1024ULL; 671 uma_memory_size += uma_size * 1024ULL; 672 debug(" and %uM GTT\n", uma_size >> 10); 673 } 674 675 /* Calculate TSEG size from its base which must be below GTT */ 676 tseg_base = x86_pci_read_config32(dev, 0xb8); 677 uma_size = (uma_memory_base - tseg_base) >> 10; 678 tomk -= uma_size; 679 uma_memory_base = tomk * 1024ULL; 680 uma_memory_size += uma_size * 1024ULL; 681 debug("TSEG base 0x%08x size %uM\n", tseg_base, uma_size >> 10); 682 683 debug("Available memory below 4GB: %lluM\n", tomk >> 10); 684 685 /* Report the memory regions */ 686 add_memory_area(info, 1 << 20, 2 << 28); 687 add_memory_area(info, (2 << 28) + (2 << 20), 4 << 28); 688 add_memory_area(info, (4 << 28) + (2 << 20), tseg_base); 689 add_memory_area(info, 1ULL << 32, touud); 690 691 /* Add MTRRs for memory */ 692 mtrr_add_request(MTRR_TYPE_WRBACK, 0, 2ULL << 30); 693 mtrr_add_request(MTRR_TYPE_WRBACK, 2ULL << 30, 512 << 20); 694 mtrr_add_request(MTRR_TYPE_WRBACK, 0xaULL << 28, 256 << 20); 695 mtrr_add_request(MTRR_TYPE_UNCACHEABLE, tseg_base, 16 << 20); 696 mtrr_add_request(MTRR_TYPE_UNCACHEABLE, tseg_base + (16 << 20), 697 32 << 20); 698 699 /* 700 * If >= 4GB installed then memory from TOLUD to 4GB 701 * is remapped above TOM, TOUUD will account for both 702 */ 703 if (touud > (1ULL << 32ULL)) { 704 debug("Available memory above 4GB: %lluM\n", 705 (touud >> 20) - 4096); 706 } 707 708 return 0; 709 } 710 711 static void rcba_config(void) 712 { 713 /* 714 * GFX INTA -> PIRQA (MSI) 715 * D28IP_P3IP WLAN INTA -> PIRQB 716 * D29IP_E1P EHCI1 INTA -> PIRQD 717 * D26IP_E2P EHCI2 INTA -> PIRQF 718 * D31IP_SIP SATA INTA -> PIRQF (MSI) 719 * D31IP_SMIP SMBUS INTB -> PIRQH 720 * D31IP_TTIP THRT INTC -> PIRQA 721 * D27IP_ZIP HDA INTA -> PIRQA (MSI) 722 * 723 * TRACKPAD -> PIRQE (Edge Triggered) 724 * TOUCHSCREEN -> PIRQG (Edge Triggered) 725 */ 726 727 /* Device interrupt pin register (board specific) */ 728 writel((INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | 729 (INTB << D31IP_SMIP) | (INTA << D31IP_SIP), RCB_REG(D31IP)); 730 writel(NOINT << D30IP_PIP, RCB_REG(D30IP)); 731 writel(INTA << D29IP_E1P, RCB_REG(D29IP)); 732 writel(INTA << D28IP_P3IP, RCB_REG(D28IP)); 733 writel(INTA << D27IP_ZIP, RCB_REG(D27IP)); 734 writel(INTA << D26IP_E2P, RCB_REG(D26IP)); 735 writel(NOINT << D25IP_LIP, RCB_REG(D25IP)); 736 writel(NOINT << D22IP_MEI1IP, RCB_REG(D22IP)); 737 738 /* Device interrupt route registers */ 739 writel(DIR_ROUTE(PIRQB, PIRQH, PIRQA, PIRQC), RCB_REG(D31IR)); 740 writel(DIR_ROUTE(PIRQD, PIRQE, PIRQF, PIRQG), RCB_REG(D29IR)); 741 writel(DIR_ROUTE(PIRQB, PIRQC, PIRQD, PIRQE), RCB_REG(D28IR)); 742 writel(DIR_ROUTE(PIRQA, PIRQH, PIRQA, PIRQB), RCB_REG(D27IR)); 743 writel(DIR_ROUTE(PIRQF, PIRQE, PIRQG, PIRQH), RCB_REG(D26IR)); 744 writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D25IR)); 745 writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D22IR)); 746 747 /* Enable IOAPIC (generic) */ 748 writew(0x0100, RCB_REG(OIC)); 749 /* PCH BWG says to read back the IOAPIC enable register */ 750 (void)readw(RCB_REG(OIC)); 751 752 /* Disable unused devices (board specific) */ 753 setbits_le32(RCB_REG(FD), PCH_DISABLE_ALWAYS); 754 } 755 756 int dram_init(void) 757 { 758 struct pei_data pei_data __aligned(8) = { 759 .pei_version = PEI_VERSION, 760 .mchbar = DEFAULT_MCHBAR, 761 .dmibar = DEFAULT_DMIBAR, 762 .epbar = DEFAULT_EPBAR, 763 .pciexbar = CONFIG_PCIE_ECAM_BASE, 764 .smbusbar = SMBUS_IO_BASE, 765 .wdbbar = 0x4000000, 766 .wdbsize = 0x1000, 767 .hpet_address = CONFIG_HPET_ADDRESS, 768 .rcba = DEFAULT_RCBABASE, 769 .pmbase = DEFAULT_PMBASE, 770 .gpiobase = DEFAULT_GPIOBASE, 771 .thermalbase = 0xfed08000, 772 .system_type = 0, /* 0 Mobile, 1 Desktop/Server */ 773 .tseg_size = CONFIG_SMM_TSEG_SIZE, 774 .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, 775 .ec_present = 1, 776 .ddr3lv_support = 1, 777 /* 778 * 0 = leave channel enabled 779 * 1 = disable dimm 0 on channel 780 * 2 = disable dimm 1 on channel 781 * 3 = disable dimm 0+1 on channel 782 */ 783 .dimm_channel0_disabled = 2, 784 .dimm_channel1_disabled = 2, 785 .max_ddr3_freq = 1600, 786 .usb_port_config = { 787 /* 788 * Empty and onboard Ports 0-7, set to un-used pin 789 * OC3 790 */ 791 { 0, 3, 0x0000 }, /* P0= Empty */ 792 { 1, 0, 0x0040 }, /* P1= Left USB 1 (OC0) */ 793 { 1, 1, 0x0040 }, /* P2= Left USB 2 (OC1) */ 794 { 1, 3, 0x0040 }, /* P3= SDCARD (no OC) */ 795 { 0, 3, 0x0000 }, /* P4= Empty */ 796 { 1, 3, 0x0040 }, /* P5= WWAN (no OC) */ 797 { 0, 3, 0x0000 }, /* P6= Empty */ 798 { 0, 3, 0x0000 }, /* P7= Empty */ 799 /* 800 * Empty and onboard Ports 8-13, set to un-used pin 801 * OC4 802 */ 803 { 1, 4, 0x0040 }, /* P8= Camera (no OC) */ 804 { 1, 4, 0x0040 }, /* P9= Bluetooth (no OC) */ 805 { 0, 4, 0x0000 }, /* P10= Empty */ 806 { 0, 4, 0x0000 }, /* P11= Empty */ 807 { 0, 4, 0x0000 }, /* P12= Empty */ 808 { 0, 4, 0x0000 }, /* P13= Empty */ 809 }, 810 }; 811 pci_dev_t dev = PCI_BDF(0, 0, 0); 812 int ret; 813 814 debug("Boot mode %d\n", gd->arch.pei_boot_mode); 815 debug("mcr_input %p\n", pei_data.mrc_input); 816 pei_data.boot_mode = gd->arch.pei_boot_mode; 817 ret = copy_spd(&pei_data); 818 if (!ret) 819 ret = sdram_initialise(&pei_data); 820 if (ret) 821 return ret; 822 823 rcba_config(); 824 quick_ram_check(); 825 826 writew(0xCAFE, MCHBAR_REG(SSKPD)); 827 828 post_code(POST_DRAM); 829 830 ret = sdram_find(dev); 831 if (ret) 832 return ret; 833 834 gd->ram_size = gd->arch.meminfo.total_32bit_memory; 835 836 return 0; 837 } 838