1 /* 2 * Copyright (c) 2011 The Chromium OS Authors. 3 * (C) Copyright 2010,2011 4 * Graeme Russ, <graeme.russ@gmail.com> 5 * 6 * Portions from Coreboot mainboard/google/link/romstage.c 7 * Copyright (C) 2007-2010 coresystems GmbH 8 * Copyright (C) 2011 Google Inc. 9 * 10 * SPDX-License-Identifier: GPL-2.0 11 */ 12 13 #include <common.h> 14 #include <errno.h> 15 #include <fdtdec.h> 16 #include <malloc.h> 17 #include <net.h> 18 #include <rtc.h> 19 #include <spi.h> 20 #include <spi_flash.h> 21 #include <asm/processor.h> 22 #include <asm/gpio.h> 23 #include <asm/global_data.h> 24 #include <asm/mtrr.h> 25 #include <asm/pci.h> 26 #include <asm/arch/me.h> 27 #include <asm/arch/mrccache.h> 28 #include <asm/arch/pei_data.h> 29 #include <asm/arch/pch.h> 30 #include <asm/post.h> 31 #include <asm/arch/sandybridge.h> 32 33 DECLARE_GLOBAL_DATA_PTR; 34 35 #define CMOS_OFFSET_MRC_SEED 152 36 #define CMOS_OFFSET_MRC_SEED_S3 156 37 #define CMOS_OFFSET_MRC_SEED_CHK 160 38 39 /* 40 * This function looks for the highest region of memory lower than 4GB which 41 * has enough space for U-Boot where U-Boot is aligned on a page boundary. 42 * It overrides the default implementation found elsewhere which simply 43 * picks the end of ram, wherever that may be. The location of the stack, 44 * the relocation address, and how far U-Boot is moved by relocation are 45 * set in the global data structure. 46 */ 47 ulong board_get_usable_ram_top(ulong total_size) 48 { 49 struct memory_info *info = &gd->arch.meminfo; 50 uintptr_t dest_addr = 0; 51 struct memory_area *largest = NULL; 52 int i; 53 54 /* Find largest area of memory below 4GB */ 55 56 for (i = 0; i < info->num_areas; i++) { 57 struct memory_area *area = &info->area[i]; 58 59 if (area->start >= 1ULL << 32) 60 continue; 61 if (!largest || area->size > largest->size) 62 largest = area; 63 } 64 65 /* If no suitable area was found, return an error. */ 66 assert(largest); 67 if (!largest || largest->size < (2 << 20)) 68 panic("No available memory found for relocation"); 69 70 dest_addr = largest->start + largest->size; 71 72 return (ulong)dest_addr; 73 } 74 75 void dram_init_banksize(void) 76 { 77 struct memory_info *info = &gd->arch.meminfo; 78 int num_banks; 79 int i; 80 81 for (i = 0, num_banks = 0; i < info->num_areas; i++) { 82 struct memory_area *area = &info->area[i]; 83 84 if (area->start >= 1ULL << 32) 85 continue; 86 gd->bd->bi_dram[num_banks].start = area->start; 87 gd->bd->bi_dram[num_banks].size = area->size; 88 num_banks++; 89 } 90 } 91 92 static int get_mrc_entry(struct spi_flash **sfp, struct fmap_entry *entry) 93 { 94 const void *blob = gd->fdt_blob; 95 int node, spi_node, mrc_node; 96 int upto; 97 98 /* Find the flash chip within the SPI controller node */ 99 upto = 0; 100 spi_node = fdtdec_next_alias(blob, "spi", COMPAT_INTEL_ICH_SPI, &upto); 101 if (spi_node < 0) 102 return -ENOENT; 103 node = fdt_first_subnode(blob, spi_node); 104 if (node < 0) 105 return -ECHILD; 106 107 /* Find the place where we put the MRC cache */ 108 mrc_node = fdt_subnode_offset(blob, node, "rw-mrc-cache"); 109 if (mrc_node < 0) 110 return -EPERM; 111 112 if (fdtdec_read_fmap_entry(blob, mrc_node, "rm-mrc-cache", entry)) 113 return -EINVAL; 114 115 if (sfp) { 116 *sfp = spi_flash_probe_fdt(blob, node, spi_node); 117 if (!*sfp) 118 return -EBADF; 119 } 120 121 return 0; 122 } 123 124 static int read_seed_from_cmos(struct pei_data *pei_data) 125 { 126 u16 c1, c2, checksum, seed_checksum; 127 128 /* 129 * Read scrambler seeds from CMOS RAM. We don't want to store them in 130 * SPI flash since they change on every boot and that would wear down 131 * the flash too much. So we store these in CMOS and the large MRC 132 * data in SPI flash. 133 */ 134 pei_data->scrambler_seed = rtc_read32(CMOS_OFFSET_MRC_SEED); 135 debug("Read scrambler seed 0x%08x from CMOS 0x%02x\n", 136 pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED); 137 138 pei_data->scrambler_seed_s3 = rtc_read32(CMOS_OFFSET_MRC_SEED_S3); 139 debug("Read S3 scrambler seed 0x%08x from CMOS 0x%02x\n", 140 pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3); 141 142 /* Compute seed checksum and compare */ 143 c1 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed, 144 sizeof(u32)); 145 c2 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed_s3, 146 sizeof(u32)); 147 checksum = add_ip_checksums(sizeof(u32), c1, c2); 148 149 seed_checksum = rtc_read8(CMOS_OFFSET_MRC_SEED_CHK); 150 seed_checksum |= rtc_read8(CMOS_OFFSET_MRC_SEED_CHK + 1) << 8; 151 152 if (checksum != seed_checksum) { 153 debug("%s: invalid seed checksum\n", __func__); 154 pei_data->scrambler_seed = 0; 155 pei_data->scrambler_seed_s3 = 0; 156 return -EINVAL; 157 } 158 159 return 0; 160 } 161 162 static int prepare_mrc_cache(struct pei_data *pei_data) 163 { 164 struct mrc_data_container *mrc_cache; 165 struct fmap_entry entry; 166 int ret; 167 168 ret = read_seed_from_cmos(pei_data); 169 if (ret) 170 return ret; 171 ret = get_mrc_entry(NULL, &entry); 172 if (ret) 173 return ret; 174 mrc_cache = mrccache_find_current(&entry); 175 if (!mrc_cache) 176 return -ENOENT; 177 178 /* 179 * TODO(sjg@chromium.org): Skip this for now as it causes boot 180 * problems 181 */ 182 if (0) { 183 pei_data->mrc_input = mrc_cache->data; 184 pei_data->mrc_input_len = mrc_cache->data_size; 185 } 186 debug("%s: at %p, size %x checksum %04x\n", __func__, 187 pei_data->mrc_input, pei_data->mrc_input_len, 188 mrc_cache->checksum); 189 190 return 0; 191 } 192 193 static int build_mrc_data(struct mrc_data_container **datap) 194 { 195 struct mrc_data_container *data; 196 int orig_len; 197 int output_len; 198 199 orig_len = gd->arch.mrc_output_len; 200 output_len = ALIGN(orig_len, 16); 201 data = malloc(output_len + sizeof(*data)); 202 if (!data) 203 return -ENOMEM; 204 data->signature = MRC_DATA_SIGNATURE; 205 data->data_size = output_len; 206 data->reserved = 0; 207 memcpy(data->data, gd->arch.mrc_output, orig_len); 208 209 /* Zero the unused space in aligned buffer. */ 210 if (output_len > orig_len) 211 memset(data->data + orig_len, 0, output_len - orig_len); 212 213 data->checksum = compute_ip_checksum(data->data, output_len); 214 *datap = data; 215 216 return 0; 217 } 218 219 static int write_seeds_to_cmos(struct pei_data *pei_data) 220 { 221 u16 c1, c2, checksum; 222 223 /* Save the MRC seed values to CMOS */ 224 rtc_write32(CMOS_OFFSET_MRC_SEED, pei_data->scrambler_seed); 225 debug("Save scrambler seed 0x%08x to CMOS 0x%02x\n", 226 pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED); 227 228 rtc_write32(CMOS_OFFSET_MRC_SEED_S3, pei_data->scrambler_seed_s3); 229 debug("Save s3 scrambler seed 0x%08x to CMOS 0x%02x\n", 230 pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3); 231 232 /* Save a simple checksum of the seed values */ 233 c1 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed, 234 sizeof(u32)); 235 c2 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed_s3, 236 sizeof(u32)); 237 checksum = add_ip_checksums(sizeof(u32), c1, c2); 238 239 rtc_write8(CMOS_OFFSET_MRC_SEED_CHK, checksum & 0xff); 240 rtc_write8(CMOS_OFFSET_MRC_SEED_CHK + 1, (checksum >> 8) & 0xff); 241 242 return 0; 243 } 244 245 static int sdram_save_mrc_data(void) 246 { 247 struct mrc_data_container *data; 248 struct fmap_entry entry; 249 struct spi_flash *sf; 250 int ret; 251 252 if (!gd->arch.mrc_output_len) 253 return 0; 254 debug("Saving %d bytes of MRC output data to SPI flash\n", 255 gd->arch.mrc_output_len); 256 257 ret = get_mrc_entry(&sf, &entry); 258 if (ret) 259 goto err_entry; 260 ret = build_mrc_data(&data); 261 if (ret) 262 goto err_data; 263 ret = mrccache_update(sf, &entry, data); 264 if (!ret) 265 debug("Saved MRC data with checksum %04x\n", data->checksum); 266 267 free(data); 268 err_data: 269 spi_flash_free(sf); 270 err_entry: 271 if (ret) 272 debug("%s: Failed: %d\n", __func__, ret); 273 return ret; 274 } 275 276 /* Use this hook to save our SDRAM parameters */ 277 int misc_init_r(void) 278 { 279 int ret; 280 281 ret = sdram_save_mrc_data(); 282 if (ret) 283 printf("Unable to save MRC data: %d\n", ret); 284 285 return 0; 286 } 287 288 static const char *const ecc_decoder[] = { 289 "inactive", 290 "active on IO", 291 "disabled on IO", 292 "active" 293 }; 294 295 /* 296 * Dump in the log memory controller configuration as read from the memory 297 * controller registers. 298 */ 299 static void report_memory_config(void) 300 { 301 u32 addr_decoder_common, addr_decode_ch[2]; 302 int i; 303 304 addr_decoder_common = readl(MCHBAR_REG(0x5000)); 305 addr_decode_ch[0] = readl(MCHBAR_REG(0x5004)); 306 addr_decode_ch[1] = readl(MCHBAR_REG(0x5008)); 307 308 debug("memcfg DDR3 clock %d MHz\n", 309 (readl(MCHBAR_REG(0x5e04)) * 13333 * 2 + 50) / 100); 310 debug("memcfg channel assignment: A: %d, B % d, C % d\n", 311 addr_decoder_common & 3, 312 (addr_decoder_common >> 2) & 3, 313 (addr_decoder_common >> 4) & 3); 314 315 for (i = 0; i < ARRAY_SIZE(addr_decode_ch); i++) { 316 u32 ch_conf = addr_decode_ch[i]; 317 debug("memcfg channel[%d] config (%8.8x):\n", i, ch_conf); 318 debug(" ECC %s\n", ecc_decoder[(ch_conf >> 24) & 3]); 319 debug(" enhanced interleave mode %s\n", 320 ((ch_conf >> 22) & 1) ? "on" : "off"); 321 debug(" rank interleave %s\n", 322 ((ch_conf >> 21) & 1) ? "on" : "off"); 323 debug(" DIMMA %d MB width x%d %s rank%s\n", 324 ((ch_conf >> 0) & 0xff) * 256, 325 ((ch_conf >> 19) & 1) ? 16 : 8, 326 ((ch_conf >> 17) & 1) ? "dual" : "single", 327 ((ch_conf >> 16) & 1) ? "" : ", selected"); 328 debug(" DIMMB %d MB width x%d %s rank%s\n", 329 ((ch_conf >> 8) & 0xff) * 256, 330 ((ch_conf >> 20) & 1) ? 16 : 8, 331 ((ch_conf >> 18) & 1) ? "dual" : "single", 332 ((ch_conf >> 16) & 1) ? ", selected" : ""); 333 } 334 } 335 336 static void post_system_agent_init(struct pei_data *pei_data) 337 { 338 /* If PCIe init is skipped, set the PEG clock gating */ 339 if (!pei_data->pcie_init) 340 setbits_le32(MCHBAR_REG(0x7010), 1); 341 } 342 343 static asmlinkage void console_tx_byte(unsigned char byte) 344 { 345 #ifdef DEBUG 346 putc(byte); 347 #endif 348 } 349 350 static int recovery_mode_enabled(void) 351 { 352 return false; 353 } 354 355 /** 356 * Find the PEI executable in the ROM and execute it. 357 * 358 * @param pei_data: configuration data for UEFI PEI reference code 359 */ 360 int sdram_initialise(struct pei_data *pei_data) 361 { 362 unsigned version; 363 const char *data; 364 uint16_t done; 365 int ret; 366 367 report_platform_info(); 368 369 /* Wait for ME to be ready */ 370 ret = intel_early_me_init(); 371 if (ret) 372 return ret; 373 ret = intel_early_me_uma_size(); 374 if (ret < 0) 375 return ret; 376 377 debug("Starting UEFI PEI System Agent\n"); 378 379 /* 380 * Do not pass MRC data in for recovery mode boot, 381 * Always pass it in for S3 resume. 382 */ 383 if (!recovery_mode_enabled() || 384 pei_data->boot_mode == PEI_BOOT_RESUME) { 385 ret = prepare_mrc_cache(pei_data); 386 if (ret) 387 debug("prepare_mrc_cache failed: %d\n", ret); 388 } 389 390 /* If MRC data is not found we cannot continue S3 resume. */ 391 if (pei_data->boot_mode == PEI_BOOT_RESUME && !pei_data->mrc_input) { 392 debug("Giving up in sdram_initialize: No MRC data\n"); 393 outb(0x6, PORT_RESET); 394 cpu_hlt(); 395 } 396 397 /* Pass console handler in pei_data */ 398 pei_data->tx_byte = console_tx_byte; 399 400 debug("PEI data at %p, size %x:\n", pei_data, sizeof(*pei_data)); 401 402 data = (char *)CONFIG_X86_MRC_ADDR; 403 if (data) { 404 int rv; 405 int (*func)(struct pei_data *); 406 407 debug("Calling MRC at %p\n", data); 408 post_code(POST_PRE_MRC); 409 func = (int (*)(struct pei_data *))data; 410 rv = func(pei_data); 411 post_code(POST_MRC); 412 if (rv) { 413 switch (rv) { 414 case -1: 415 printf("PEI version mismatch.\n"); 416 break; 417 case -2: 418 printf("Invalid memory frequency.\n"); 419 break; 420 default: 421 printf("MRC returned %x.\n", rv); 422 } 423 printf("Nonzero MRC return value.\n"); 424 return -EFAULT; 425 } 426 } else { 427 printf("UEFI PEI System Agent not found.\n"); 428 return -ENOSYS; 429 } 430 431 #if CONFIG_USBDEBUG 432 /* mrc.bin reconfigures USB, so reinit it to have debug */ 433 early_usbdebug_init(); 434 #endif 435 436 version = readl(MCHBAR_REG(0x5034)); 437 debug("System Agent Version %d.%d.%d Build %d\n", 438 version >> 24 , (version >> 16) & 0xff, 439 (version >> 8) & 0xff, version & 0xff); 440 debug("MCR output data length %#x at %p\n", pei_data->mrc_output_len, 441 pei_data->mrc_output); 442 443 /* 444 * Send ME init done for SandyBridge here. This is done inside the 445 * SystemAgent binary on IvyBridge 446 */ 447 done = pci_read_config32(PCH_DEV, PCI_DEVICE_ID); 448 done &= BASE_REV_MASK; 449 if (BASE_REV_SNB == done) 450 intel_early_me_init_done(ME_INIT_STATUS_SUCCESS); 451 else 452 intel_early_me_status(); 453 454 post_system_agent_init(pei_data); 455 report_memory_config(); 456 457 /* S3 resume: don't save scrambler seed or MRC data */ 458 if (pei_data->boot_mode != PEI_BOOT_RESUME) { 459 /* 460 * This will be copied to SDRAM in reserve_arch(), then written 461 * to SPI flash in sdram_save_mrc_data() 462 */ 463 gd->arch.mrc_output = (char *)pei_data->mrc_output; 464 gd->arch.mrc_output_len = pei_data->mrc_output_len; 465 ret = write_seeds_to_cmos(pei_data); 466 if (ret) 467 debug("Failed to write seeds to CMOS: %d\n", ret); 468 } 469 470 return 0; 471 } 472 473 int reserve_arch(void) 474 { 475 u16 checksum; 476 477 checksum = compute_ip_checksum(gd->arch.mrc_output, 478 gd->arch.mrc_output_len); 479 debug("Saving %d bytes for MRC output data, checksum %04x\n", 480 gd->arch.mrc_output_len, checksum); 481 gd->start_addr_sp -= gd->arch.mrc_output_len; 482 memcpy((void *)gd->start_addr_sp, gd->arch.mrc_output, 483 gd->arch.mrc_output_len); 484 gd->arch.mrc_output = (char *)gd->start_addr_sp; 485 gd->start_addr_sp &= ~0xf; 486 487 return 0; 488 } 489 490 static int copy_spd(struct pei_data *peid) 491 { 492 const int gpio_vector[] = {41, 42, 43, 10, -1}; 493 int spd_index; 494 const void *blob = gd->fdt_blob; 495 int node, spd_node; 496 int ret, i; 497 498 for (i = 0; ; i++) { 499 if (gpio_vector[i] == -1) 500 break; 501 ret = gpio_requestf(gpio_vector[i], "spd_id%d", i); 502 if (ret) { 503 debug("%s: Could not request gpio %d\n", __func__, 504 gpio_vector[i]); 505 return ret; 506 } 507 } 508 spd_index = gpio_get_values_as_int(gpio_vector); 509 debug("spd index %d\n", spd_index); 510 node = fdtdec_next_compatible(blob, 0, COMPAT_MEMORY_SPD); 511 if (node < 0) { 512 printf("SPD data not found.\n"); 513 return -ENOENT; 514 } 515 516 for (spd_node = fdt_first_subnode(blob, node); 517 spd_node > 0; 518 spd_node = fdt_next_subnode(blob, spd_node)) { 519 const char *data; 520 int len; 521 522 if (fdtdec_get_int(blob, spd_node, "reg", -1) != spd_index) 523 continue; 524 data = fdt_getprop(blob, spd_node, "data", &len); 525 if (len < sizeof(peid->spd_data[0])) { 526 printf("Missing SPD data\n"); 527 return -EINVAL; 528 } 529 530 debug("Using SDRAM SPD data for '%s'\n", 531 fdt_get_name(blob, spd_node, NULL)); 532 memcpy(peid->spd_data[0], data, sizeof(peid->spd_data[0])); 533 break; 534 } 535 536 if (spd_node < 0) { 537 printf("No SPD data found for index %d\n", spd_index); 538 return -ENOENT; 539 } 540 541 return 0; 542 } 543 544 /** 545 * add_memory_area() - Add a new usable memory area to our list 546 * 547 * Note: @start and @end must not span the first 4GB boundary 548 * 549 * @info: Place to store memory info 550 * @start: Start of this memory area 551 * @end: End of this memory area + 1 552 */ 553 static int add_memory_area(struct memory_info *info, 554 uint64_t start, uint64_t end) 555 { 556 struct memory_area *ptr; 557 558 if (info->num_areas == CONFIG_NR_DRAM_BANKS) 559 return -ENOSPC; 560 561 ptr = &info->area[info->num_areas]; 562 ptr->start = start; 563 ptr->size = end - start; 564 info->total_memory += ptr->size; 565 if (ptr->start < (1ULL << 32)) 566 info->total_32bit_memory += ptr->size; 567 debug("%d: memory %llx size %llx, total now %llx / %llx\n", 568 info->num_areas, ptr->start, ptr->size, 569 info->total_32bit_memory, info->total_memory); 570 info->num_areas++; 571 572 return 0; 573 } 574 575 /** 576 * sdram_find() - Find available memory 577 * 578 * This is a bit complicated since on x86 there are system memory holes all 579 * over the place. We create a list of available memory blocks 580 */ 581 static int sdram_find(pci_dev_t dev) 582 { 583 struct memory_info *info = &gd->arch.meminfo; 584 uint32_t tseg_base, uma_size, tolud; 585 uint64_t tom, me_base, touud; 586 uint64_t uma_memory_base = 0; 587 uint64_t uma_memory_size; 588 unsigned long long tomk; 589 uint16_t ggc; 590 591 /* Total Memory 2GB example: 592 * 593 * 00000000 0000MB-1992MB 1992MB RAM (writeback) 594 * 7c800000 1992MB-2000MB 8MB TSEG (SMRR) 595 * 7d000000 2000MB-2002MB 2MB GFX GTT (uncached) 596 * 7d200000 2002MB-2034MB 32MB GFX UMA (uncached) 597 * 7f200000 2034MB TOLUD 598 * 7f800000 2040MB MEBASE 599 * 7f800000 2040MB-2048MB 8MB ME UMA (uncached) 600 * 80000000 2048MB TOM 601 * 100000000 4096MB-4102MB 6MB RAM (writeback) 602 * 603 * Total Memory 4GB example: 604 * 605 * 00000000 0000MB-2768MB 2768MB RAM (writeback) 606 * ad000000 2768MB-2776MB 8MB TSEG (SMRR) 607 * ad800000 2776MB-2778MB 2MB GFX GTT (uncached) 608 * ada00000 2778MB-2810MB 32MB GFX UMA (uncached) 609 * afa00000 2810MB TOLUD 610 * ff800000 4088MB MEBASE 611 * ff800000 4088MB-4096MB 8MB ME UMA (uncached) 612 * 100000000 4096MB TOM 613 * 100000000 4096MB-5374MB 1278MB RAM (writeback) 614 * 14fe00000 5368MB TOUUD 615 */ 616 617 /* Top of Upper Usable DRAM, including remap */ 618 touud = pci_read_config32(dev, TOUUD+4); 619 touud <<= 32; 620 touud |= pci_read_config32(dev, TOUUD); 621 622 /* Top of Lower Usable DRAM */ 623 tolud = pci_read_config32(dev, TOLUD); 624 625 /* Top of Memory - does not account for any UMA */ 626 tom = pci_read_config32(dev, 0xa4); 627 tom <<= 32; 628 tom |= pci_read_config32(dev, 0xa0); 629 630 debug("TOUUD %llx TOLUD %08x TOM %llx\n", touud, tolud, tom); 631 632 /* ME UMA needs excluding if total memory <4GB */ 633 me_base = pci_read_config32(dev, 0x74); 634 me_base <<= 32; 635 me_base |= pci_read_config32(dev, 0x70); 636 637 debug("MEBASE %llx\n", me_base); 638 639 /* TODO: Get rid of all this shifting by 10 bits */ 640 tomk = tolud >> 10; 641 if (me_base == tolud) { 642 /* ME is from MEBASE-TOM */ 643 uma_size = (tom - me_base) >> 10; 644 /* Increment TOLUD to account for ME as RAM */ 645 tolud += uma_size << 10; 646 /* UMA starts at old TOLUD */ 647 uma_memory_base = tomk * 1024ULL; 648 uma_memory_size = uma_size * 1024ULL; 649 debug("ME UMA base %llx size %uM\n", me_base, uma_size >> 10); 650 } 651 652 /* Graphics memory comes next */ 653 ggc = pci_read_config16(dev, GGC); 654 if (!(ggc & 2)) { 655 debug("IGD decoded, subtracting "); 656 657 /* Graphics memory */ 658 uma_size = ((ggc >> 3) & 0x1f) * 32 * 1024ULL; 659 debug("%uM UMA", uma_size >> 10); 660 tomk -= uma_size; 661 uma_memory_base = tomk * 1024ULL; 662 uma_memory_size += uma_size * 1024ULL; 663 664 /* GTT Graphics Stolen Memory Size (GGMS) */ 665 uma_size = ((ggc >> 8) & 0x3) * 1024ULL; 666 tomk -= uma_size; 667 uma_memory_base = tomk * 1024ULL; 668 uma_memory_size += uma_size * 1024ULL; 669 debug(" and %uM GTT\n", uma_size >> 10); 670 } 671 672 /* Calculate TSEG size from its base which must be below GTT */ 673 tseg_base = pci_read_config32(dev, 0xb8); 674 uma_size = (uma_memory_base - tseg_base) >> 10; 675 tomk -= uma_size; 676 uma_memory_base = tomk * 1024ULL; 677 uma_memory_size += uma_size * 1024ULL; 678 debug("TSEG base 0x%08x size %uM\n", tseg_base, uma_size >> 10); 679 680 debug("Available memory below 4GB: %lluM\n", tomk >> 10); 681 682 /* Report the memory regions */ 683 add_memory_area(info, 1 << 20, 2 << 28); 684 add_memory_area(info, (2 << 28) + (2 << 20), 4 << 28); 685 add_memory_area(info, (4 << 28) + (2 << 20), tseg_base); 686 add_memory_area(info, 1ULL << 32, touud); 687 688 /* Add MTRRs for memory */ 689 mtrr_add_request(MTRR_TYPE_WRBACK, 0, 2ULL << 30); 690 mtrr_add_request(MTRR_TYPE_WRBACK, 2ULL << 30, 512 << 20); 691 mtrr_add_request(MTRR_TYPE_WRBACK, 0xaULL << 28, 256 << 20); 692 mtrr_add_request(MTRR_TYPE_UNCACHEABLE, tseg_base, 16 << 20); 693 mtrr_add_request(MTRR_TYPE_UNCACHEABLE, tseg_base + (16 << 20), 694 32 << 20); 695 696 /* 697 * If >= 4GB installed then memory from TOLUD to 4GB 698 * is remapped above TOM, TOUUD will account for both 699 */ 700 if (touud > (1ULL << 32ULL)) { 701 debug("Available memory above 4GB: %lluM\n", 702 (touud >> 20) - 4096); 703 } 704 705 return 0; 706 } 707 708 static void rcba_config(void) 709 { 710 /* 711 * GFX INTA -> PIRQA (MSI) 712 * D28IP_P3IP WLAN INTA -> PIRQB 713 * D29IP_E1P EHCI1 INTA -> PIRQD 714 * D26IP_E2P EHCI2 INTA -> PIRQF 715 * D31IP_SIP SATA INTA -> PIRQF (MSI) 716 * D31IP_SMIP SMBUS INTB -> PIRQH 717 * D31IP_TTIP THRT INTC -> PIRQA 718 * D27IP_ZIP HDA INTA -> PIRQA (MSI) 719 * 720 * TRACKPAD -> PIRQE (Edge Triggered) 721 * TOUCHSCREEN -> PIRQG (Edge Triggered) 722 */ 723 724 /* Device interrupt pin register (board specific) */ 725 writel((INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | 726 (INTB << D31IP_SMIP) | (INTA << D31IP_SIP), RCB_REG(D31IP)); 727 writel(NOINT << D30IP_PIP, RCB_REG(D30IP)); 728 writel(INTA << D29IP_E1P, RCB_REG(D29IP)); 729 writel(INTA << D28IP_P3IP, RCB_REG(D28IP)); 730 writel(INTA << D27IP_ZIP, RCB_REG(D27IP)); 731 writel(INTA << D26IP_E2P, RCB_REG(D26IP)); 732 writel(NOINT << D25IP_LIP, RCB_REG(D25IP)); 733 writel(NOINT << D22IP_MEI1IP, RCB_REG(D22IP)); 734 735 /* Device interrupt route registers */ 736 writel(DIR_ROUTE(PIRQB, PIRQH, PIRQA, PIRQC), RCB_REG(D31IR)); 737 writel(DIR_ROUTE(PIRQD, PIRQE, PIRQF, PIRQG), RCB_REG(D29IR)); 738 writel(DIR_ROUTE(PIRQB, PIRQC, PIRQD, PIRQE), RCB_REG(D28IR)); 739 writel(DIR_ROUTE(PIRQA, PIRQH, PIRQA, PIRQB), RCB_REG(D27IR)); 740 writel(DIR_ROUTE(PIRQF, PIRQE, PIRQG, PIRQH), RCB_REG(D26IR)); 741 writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D25IR)); 742 writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D22IR)); 743 744 /* Enable IOAPIC (generic) */ 745 writew(0x0100, RCB_REG(OIC)); 746 /* PCH BWG says to read back the IOAPIC enable register */ 747 (void)readw(RCB_REG(OIC)); 748 749 /* Disable unused devices (board specific) */ 750 setbits_le32(RCB_REG(FD), PCH_DISABLE_ALWAYS); 751 } 752 753 int dram_init(void) 754 { 755 struct pei_data pei_data __aligned(8) = { 756 .pei_version = PEI_VERSION, 757 .mchbar = DEFAULT_MCHBAR, 758 .dmibar = DEFAULT_DMIBAR, 759 .epbar = DEFAULT_EPBAR, 760 .pciexbar = CONFIG_PCIE_ECAM_BASE, 761 .smbusbar = SMBUS_IO_BASE, 762 .wdbbar = 0x4000000, 763 .wdbsize = 0x1000, 764 .hpet_address = CONFIG_HPET_ADDRESS, 765 .rcba = DEFAULT_RCBABASE, 766 .pmbase = DEFAULT_PMBASE, 767 .gpiobase = DEFAULT_GPIOBASE, 768 .thermalbase = 0xfed08000, 769 .system_type = 0, /* 0 Mobile, 1 Desktop/Server */ 770 .tseg_size = CONFIG_SMM_TSEG_SIZE, 771 .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, 772 .ec_present = 1, 773 .ddr3lv_support = 1, 774 /* 775 * 0 = leave channel enabled 776 * 1 = disable dimm 0 on channel 777 * 2 = disable dimm 1 on channel 778 * 3 = disable dimm 0+1 on channel 779 */ 780 .dimm_channel0_disabled = 2, 781 .dimm_channel1_disabled = 2, 782 .max_ddr3_freq = 1600, 783 .usb_port_config = { 784 /* 785 * Empty and onboard Ports 0-7, set to un-used pin 786 * OC3 787 */ 788 { 0, 3, 0x0000 }, /* P0= Empty */ 789 { 1, 0, 0x0040 }, /* P1= Left USB 1 (OC0) */ 790 { 1, 1, 0x0040 }, /* P2= Left USB 2 (OC1) */ 791 { 1, 3, 0x0040 }, /* P3= SDCARD (no OC) */ 792 { 0, 3, 0x0000 }, /* P4= Empty */ 793 { 1, 3, 0x0040 }, /* P5= WWAN (no OC) */ 794 { 0, 3, 0x0000 }, /* P6= Empty */ 795 { 0, 3, 0x0000 }, /* P7= Empty */ 796 /* 797 * Empty and onboard Ports 8-13, set to un-used pin 798 * OC4 799 */ 800 { 1, 4, 0x0040 }, /* P8= Camera (no OC) */ 801 { 1, 4, 0x0040 }, /* P9= Bluetooth (no OC) */ 802 { 0, 4, 0x0000 }, /* P10= Empty */ 803 { 0, 4, 0x0000 }, /* P11= Empty */ 804 { 0, 4, 0x0000 }, /* P12= Empty */ 805 { 0, 4, 0x0000 }, /* P13= Empty */ 806 }, 807 }; 808 pci_dev_t dev = PCI_BDF(0, 0, 0); 809 int ret; 810 811 debug("Boot mode %d\n", gd->arch.pei_boot_mode); 812 debug("mcr_input %p\n", pei_data.mrc_input); 813 pei_data.boot_mode = gd->arch.pei_boot_mode; 814 ret = copy_spd(&pei_data); 815 if (!ret) 816 ret = sdram_initialise(&pei_data); 817 if (ret) 818 return ret; 819 820 rcba_config(); 821 quick_ram_check(); 822 823 writew(0xCAFE, MCHBAR_REG(SSKPD)); 824 825 post_code(POST_DRAM); 826 827 ret = sdram_find(dev); 828 if (ret) 829 return ret; 830 831 gd->ram_size = gd->arch.meminfo.total_32bit_memory; 832 833 return 0; 834 } 835