1 /* 2 * From Coreboot 3 * Copyright (C) 2008-2009 coresystems GmbH 4 * 5 * SPDX-License-Identifier: GPL-2.0 6 */ 7 8 #include <common.h> 9 #include <dm.h> 10 #include <fdtdec.h> 11 #include <asm/io.h> 12 #include <asm/pch_common.h> 13 #include <asm/pci.h> 14 #include <asm/arch/pch.h> 15 16 DECLARE_GLOBAL_DATA_PTR; 17 18 static void common_sata_init(struct udevice *dev, unsigned int port_map) 19 { 20 u32 reg32; 21 u16 reg16; 22 23 /* Set IDE I/O Configuration */ 24 reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0; 25 dm_pci_write_config32(dev, IDE_CONFIG, reg32); 26 27 /* Port enable */ 28 dm_pci_read_config16(dev, 0x92, ®16); 29 reg16 &= ~0x3f; 30 reg16 |= port_map; 31 dm_pci_write_config16(dev, 0x92, reg16); 32 33 /* SATA Initialization register */ 34 port_map &= 0xff; 35 dm_pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183); 36 } 37 38 static void bd82x6x_sata_init(struct udevice *dev, struct udevice *pch) 39 { 40 unsigned int port_map, speed_support, port_tx; 41 const void *blob = gd->fdt_blob; 42 int node = dev->of_offset; 43 const char *mode; 44 u32 reg32; 45 u16 reg16; 46 47 debug("SATA: Initializing...\n"); 48 49 /* SATA configuration */ 50 port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0); 51 speed_support = fdtdec_get_int(blob, node, 52 "sata_interface_speed_support", 0); 53 54 mode = fdt_getprop(blob, node, "intel,sata-mode", NULL); 55 if (!mode || !strcmp(mode, "ahci")) { 56 ulong abar; 57 58 debug("SATA: Controller in AHCI mode\n"); 59 60 /* Set timings */ 61 dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE | 62 IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | 63 IDE_PPE0 | IDE_IE0 | IDE_TIME0); 64 dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE | 65 IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS); 66 67 /* Sync DMA */ 68 dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0); 69 dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0001); 70 71 common_sata_init(dev, 0x8000 | port_map); 72 73 /* Initialize AHCI memory-mapped space */ 74 abar = dm_pci_read_bar32(dev, 5); 75 debug("ABAR: %08lx\n", abar); 76 /* CAP (HBA Capabilities) : enable power management */ 77 reg32 = readl(abar + 0x00); 78 reg32 |= 0x0c006000; /* set PSC+SSC+SALP+SSS */ 79 reg32 &= ~0x00020060; /* clear SXS+EMS+PMS */ 80 /* Set ISS, if available */ 81 if (speed_support) { 82 reg32 &= ~0x00f00000; 83 reg32 |= (speed_support & 0x03) << 20; 84 } 85 writel(reg32, abar + 0x00); 86 /* PI (Ports implemented) */ 87 writel(port_map, abar + 0x0c); 88 (void) readl(abar + 0x0c); /* Read back 1 */ 89 (void) readl(abar + 0x0c); /* Read back 2 */ 90 /* CAP2 (HBA Capabilities Extended)*/ 91 reg32 = readl(abar + 0x24); 92 reg32 &= ~0x00000002; 93 writel(reg32, abar + 0x24); 94 /* VSP (Vendor Specific Register */ 95 reg32 = readl(abar + 0xa0); 96 reg32 &= ~0x00000005; 97 writel(reg32, abar + 0xa0); 98 } else if (!strcmp(mode, "combined")) { 99 debug("SATA: Controller in combined mode\n"); 100 101 /* No AHCI: clear AHCI base */ 102 dm_pci_write_bar32(dev, 5, 0x00000000); 103 /* And without AHCI BAR no memory decoding */ 104 dm_pci_read_config16(dev, PCI_COMMAND, ®16); 105 reg16 &= ~PCI_COMMAND_MEMORY; 106 dm_pci_write_config16(dev, PCI_COMMAND, reg16); 107 108 dm_pci_write_config8(dev, 0x09, 0x80); 109 110 /* Set timings */ 111 dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE | 112 IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS); 113 dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE | 114 IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | 115 IDE_PPE0 | IDE_IE0 | IDE_TIME0); 116 117 /* Sync DMA */ 118 dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0); 119 dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0200); 120 121 common_sata_init(dev, port_map); 122 } else { 123 debug("SATA: Controller in plain-ide mode\n"); 124 125 /* No AHCI: clear AHCI base */ 126 dm_pci_write_bar32(dev, 5, 0x00000000); 127 128 /* And without AHCI BAR no memory decoding */ 129 dm_pci_read_config16(dev, PCI_COMMAND, ®16); 130 reg16 &= ~PCI_COMMAND_MEMORY; 131 dm_pci_write_config16(dev, PCI_COMMAND, reg16); 132 133 /* 134 * Native mode capable on both primary and secondary (0xa) 135 * OR'ed with enabled (0x50) = 0xf 136 */ 137 dm_pci_write_config8(dev, 0x09, 0x8f); 138 139 /* Set timings */ 140 dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE | 141 IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | 142 IDE_PPE0 | IDE_IE0 | IDE_TIME0); 143 dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE | 144 IDE_SITRE | IDE_ISP_3_CLOCKS | 145 IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0); 146 147 /* Sync DMA */ 148 dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0); 149 dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0201); 150 151 common_sata_init(dev, port_map); 152 } 153 154 /* Set Gen3 Transmitter settings if needed */ 155 port_tx = fdtdec_get_int(blob, node, "intel,sata-port0-gen3-tx", 0); 156 if (port_tx) 157 pch_iobp_update(pch, SATA_IOBP_SP0G3IR, 0, port_tx); 158 159 port_tx = fdtdec_get_int(blob, node, "intel,sata-port1-gen3-tx", 0); 160 if (port_tx) 161 pch_iobp_update(pch, SATA_IOBP_SP1G3IR, 0, port_tx); 162 163 /* Additional Programming Requirements */ 164 pch_common_sir_write(dev, 0x04, 0x00001600); 165 pch_common_sir_write(dev, 0x28, 0xa0000033); 166 reg32 = pch_common_sir_read(dev, 0x54); 167 reg32 &= 0xff000000; 168 reg32 |= 0x5555aa; 169 pch_common_sir_write(dev, 0x54, reg32); 170 pch_common_sir_write(dev, 0x64, 0xcccc8484); 171 reg32 = pch_common_sir_read(dev, 0x68); 172 reg32 &= 0xffff0000; 173 reg32 |= 0xcccc; 174 pch_common_sir_write(dev, 0x68, reg32); 175 reg32 = pch_common_sir_read(dev, 0x78); 176 reg32 &= 0x0000ffff; 177 reg32 |= 0x88880000; 178 pch_common_sir_write(dev, 0x78, reg32); 179 pch_common_sir_write(dev, 0x84, 0x001c7000); 180 pch_common_sir_write(dev, 0x88, 0x88338822); 181 pch_common_sir_write(dev, 0xa0, 0x001c7000); 182 pch_common_sir_write(dev, 0xc4, 0x0c0c0c0c); 183 pch_common_sir_write(dev, 0xc8, 0x0c0c0c0c); 184 pch_common_sir_write(dev, 0xd4, 0x10000000); 185 186 pch_iobp_update(pch, 0xea004001, 0x3fffffff, 0xc0000000); 187 pch_iobp_update(pch, 0xea00408a, 0xfffffcff, 0x00000100); 188 } 189 190 static void bd82x6x_sata_enable(struct udevice *dev) 191 { 192 const void *blob = gd->fdt_blob; 193 int node = dev->of_offset; 194 unsigned port_map; 195 const char *mode; 196 u16 map = 0; 197 198 /* 199 * Set SATA controller mode early so the resource allocator can 200 * properly assign IO/Memory resources for the controller. 201 */ 202 mode = fdt_getprop(blob, node, "intel,sata-mode", NULL); 203 if (mode && !strcmp(mode, "ahci")) 204 map = 0x0060; 205 port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0); 206 207 map |= (port_map ^ 0x3f) << 8; 208 dm_pci_write_config16(dev, 0x90, map); 209 } 210 211 static int bd82x6x_sata_probe(struct udevice *dev) 212 { 213 struct udevice *pch; 214 int ret; 215 216 ret = uclass_first_device_err(UCLASS_PCH, &pch); 217 if (ret) 218 return ret; 219 220 if (!(gd->flags & GD_FLG_RELOC)) 221 bd82x6x_sata_enable(dev); 222 else 223 bd82x6x_sata_init(dev, pch); 224 225 return 0; 226 } 227 228 static const struct udevice_id bd82x6x_ahci_ids[] = { 229 { .compatible = "intel,pantherpoint-ahci" }, 230 { } 231 }; 232 233 U_BOOT_DRIVER(ahci_ivybridge_drv) = { 234 .name = "ahci_ivybridge", 235 .id = UCLASS_AHCI, 236 .of_match = bd82x6x_ahci_ids, 237 .probe = bd82x6x_sata_probe, 238 }; 239